Diff: targets/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_KL27Z/drivers/fsl_sim.h

Revision:

155:88546b34ff1c

Parent:

154:37f96f9d4de2

Child:

156:95d6b41a828b

--- a/targets/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_KL27Z/drivers/fsl_sim.h	Wed Jan 04 16:58:05 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,128 +0,0 @@
-/*
-* Copyright (c) 2015, Freescale Semiconductor, Inc.
-* All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*
-* o Redistributions of source code must retain the above copyright notice, this list
-*   of conditions and the following disclaimer.
-*
-* o Redistributions in binary form must reproduce the above copyright notice, this
-*   list of conditions and the following disclaimer in the documentation and/or
-*   other materials provided with the distribution.
-*
-* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-*   contributors may be used to endorse or promote products derived from this
-*   software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef _FSL_SIM_H_
-#define _FSL_SIM_H_
-
-#include "fsl_common.h"
-
-/*! @addtogroup sim */
-/*! @{*/
-
-/*! @file */
-
-/*******************************************************************************
- * Definitions
- *******************************************************************************/
-
-/*! @name Driver version */
-/*@{*/
-#define FSL_SIM_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Driver version 2.0.0 */
-/*@}*/
-
-#if (defined(FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) && FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR)
-/*!@brief USB voltage regulator enable setting. */
-enum _sim_usb_volt_reg_enable_mode
-{
-    kSIM_UsbVoltRegEnable = SIM_SOPT1_USBREGEN_MASK,           /*!< Enable voltage regulator. */
-    kSIM_UsbVoltRegEnableInLowPower = SIM_SOPT1_USBVSTBY_MASK, /*!< Enable voltage regulator in VLPR/VLPW modes. */
-    kSIM_UsbVoltRegEnableInStop = SIM_SOPT1_USBSSTBY_MASK, /*!< Enable voltage regulator in STOP/VLPS/LLS/VLLS modes. */
-    kSIM_UsbVoltRegEnableInAllModes = SIM_SOPT1_USBREGEN_MASK | SIM_SOPT1_USBSSTBY_MASK |
-                                      SIM_SOPT1_USBVSTBY_MASK /*!< Enable voltage regulator in all power modes. */
-};
-#endif /* (defined(FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) && FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) */
-
-/*!@brief Unique ID. */
-typedef struct _sim_uid
-{
-#if defined(SIM_UIDH)
-    uint32_t H; /*!< UIDH.  */
-#endif
-    uint32_t MH; /*!< UIDMH. */
-    uint32_t ML; /*!< UIDML. */
-    uint32_t L;  /*!< UIDL.  */
-} sim_uid_t;
-
-/*!@brief Flash enable mode. */
-enum _sim_flash_mode
-{
-    kSIM_FlashDisableInWait = SIM_FCFG1_FLASHDOZE_MASK, /*!< Disable flash in wait mode.   */
-    kSIM_FlashDisable = SIM_FCFG1_FLASHDIS_MASK         /*!< Disable flash in normal mode. */
-};
-
-/*******************************************************************************
- * API
- ******************************************************************************/
-
-#if defined(__cplusplus)
-extern "C" {
-#endif /* __cplusplus*/
-
-#if (defined(FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR) && FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR)
-/*!
- * @brief Sets the USB voltage regulator setting.
- *
- * This function configures whether the USB voltage regulator is enabled in
- * normal RUN mode, STOP/VLPS/LLS/VLLS modes and VLPR/VLPW modes. The configurations
- * are passed in as mask value of \ref _sim_usb_volt_reg_enable_mode. For example, enable
- * USB voltage regulator in RUN/VLPR/VLPW modes and disable in STOP/VLPS/LLS/VLLS mode,
- * please use:
- *
- * SIM_SetUsbVoltRegulatorEnableMode(kSIM_UsbVoltRegEnable | kSIM_UsbVoltRegEnableInLowPower);
- *
- * @param mask  USB voltage regulator enable setting.
- */
-void SIM_SetUsbVoltRegulatorEnableMode(uint32_t mask);
-#endif /* FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR */
-
-/*!
- * @brief Get the unique identification register value.
- *
- * @param uid Pointer to the structure to save the UID value.
- */
-void SIM_GetUniqueId(sim_uid_t *uid);
-
-/*!
- * @brief Set the flash enable mode.
- *
- * @param mode The mode to set, see \ref _sim_flash_mode for mode details.
- */
-static inline void SIM_SetFlashMode(uint8_t mode)
-{
-    SIM->FCFG1 = mode;
-}
-
-#if defined(__cplusplus)
-}
-#endif /* __cplusplus*/
-
-/*! @}*/
-
-#endif /* _FSL_SIM_H_ */