John Karatka
mbed
Fork of
mbed-dev
by 
mbed official
Diff: targets/targets.json
- Revision:
- 182:57724642e740
- Parent:
- 181:96ed750bd169
--- a/targets/targets.json Wed Jan 17 15:23:54 2018 +0000
+++ b/targets/targets.json Fri Feb 16 16:09:33 2018 +0000
@@ -691,7 +691,7 @@
"macros": ["CPU_MK82FN256VDC15", "FSL_RTOS_MBED"],
"inherits": ["Target"],
"detect_code": ["0217"],
- "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "TRNG"],
+ "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "MK82FN256xxx15"
},
@@ -714,11 +714,24 @@
},
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"]
},
+ "MIMXRT1050_EVK": {
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M7FD",
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "extra_labels": ["NXP", "MCUXpresso_MCUS", "EVK", "MIMXRT1050", "IMX"],
+ "is_disk_virtual": true,
+ "macros": ["CPU_MIMXRT1052DVL6A", "FSL_RTOS_MBED"],
+ "inherits": ["Target"],
+ "detect_code": ["0227"],
+ "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "ERROR_RED", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+ "release_versions": ["2", "5"],
+ "device_name": "MIMXRT1052"
+ },
"LPC54114": {
"supported_form_factors": ["ARDUINO"],
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "IAR", "GCC_ARM"],
- "extra_labels": ["NXP", "MCUXpresso_MCUS", "LPC54114_M4", "LPCXpresso"],
+ "extra_labels": ["NXP", "MCUXpresso_MCUS", "LPC54114_M4", "LPCXpresso", "LPC"],
"is_disk_virtual": true,
"macros": ["CPU_LPC54114J256BD64_cm4", "FSL_RTOS_MBED"],
"inherits": ["Target"],
@@ -727,24 +740,26 @@
"release_versions": ["2", "5"],
"device_name" : "LPC54114J256BD64"
},
- "LPC546XX": {
- "supported_form_factors": ["ARDUINO"],
+ "MCU_LPC546XX": {
"core": "Cortex-M4F",
"supported_toolchains": ["ARM", "IAR", "GCC_ARM"],
- "extra_labels": ["NXP", "MCUXpresso_MCUS", "LPCXpresso"],
+ "extra_labels": ["NXP", "MCUXpresso_MCUS", "LPCXpresso", "LPC", "LPC546XX"],
"is_disk_virtual": true,
"macros": ["CPU_LPC54618J512ET180", "FSL_RTOS_MBED"],
"inherits": ["Target"],
- "detect_code": ["1056"],
"device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
"features": ["LWIP"],
"release_versions": ["2", "5"],
"device_name" : "LPC54618J512ET180"
},
+ "LPC546XX": {
+ "supported_form_factors": ["ARDUINO"],
+ "inherits": ["MCU_LPC546XX"],
+ "detect_code": ["1056"]
+ },
"FF_LPC546XX": {
- "inherits": ["LPC546XX"],
+ "inherits": ["MCU_LPC546XX"],
"extra_labels_remove" : ["LPCXpresso"],
- "supported_form_factors": [""],
"detect_code": ["8081"]
},
"NUCLEO_F030R8": {
@@ -903,7 +918,7 @@
},
"detect_code": ["0835"],
"macros_add": ["USBHOST_OTHER"],
- "device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC"],
+ "device_has_add": ["ANALOGOUT", "CAN", "SERIAL_ASYNCH", "SERIAL_FC", "FLASH"],
"features": ["LWIP"],
"release_versions": ["2", "5"],
"device_name": "STM32F207ZG"
@@ -1025,6 +1040,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0744"],
@@ -1074,6 +1093,31 @@
"device_name": "STM32F412ZG",
"bootloader_supported": true
},
+ "MTB_MXCHIP_EMW3166": {
+ "inherits": ["FAMILY_STM32"],
+ "core": "Cortex-M4F",
+ "extra_labels_add": ["STM32F4", "STM32F412xG", "STM32F412ZG"],
+ "macros_add": ["USB_STM_HAL", "USBHOST_OTHER"],
+ "device_has_add": ["CAN", "LOWPOWERTIMER", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
+ "release_versions": ["2", "5"],
+ "device_name": "STM32F412ZG",
+ "bootloader_supported": true,
+ "config": {
+ "stdio_uart_tx": {
+ "help": "Value PB_6",
+ "value": "PB_6"
+ },
+ "stdio_uart_rx": {
+ "help": "Value PB_7",
+ "value": "PB_7"
+ },
+ "clock_source": {
+ "help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
+ "value": "USE_PLL_HSI",
+ "macro_name": "CLOCK_SOURCE"
+ }
+ }
+ },
"DISCO_F413ZH": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
@@ -1084,6 +1128,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0743"],
@@ -1244,6 +1292,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"macros_add": ["USBHOST_OTHER"],
@@ -1252,7 +1304,8 @@
"device_has_add": ["ANALOGOUT", "CAN", "LOWPOWERTIMER", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"features": ["LWIP"],
"release_versions": ["2", "5"],
- "device_name": "STM32F746ZG"
+ "device_name": "STM32F746ZG",
+ "bootloader_supported": true
},
"NUCLEO_F756ZG": {
"inherits": ["FAMILY_STM32"],
@@ -1268,6 +1321,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"macros_add": ["TRANSACTION_QUEUE_SIZE_SPI=2", "USBHOST_OTHER", "MBEDTLS_CONFIG_HW_SUPPORT"],
@@ -1292,6 +1349,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"supported_form_factors": ["ARDUINO"],
@@ -1300,7 +1361,8 @@
"device_has_add": ["ANALOGOUT", "CAN", "LOWPOWERTIMER", "SERIAL_ASYNCH", "TRNG", "FLASH"],
"features": ["LWIP"],
"release_versions": ["2", "5"],
- "device_name": "STM32F767ZI"
+ "device_name": "STM32F767ZI",
+ "bootloader_supported": true
},
"NUCLEO_L011K4": {
"inherits": ["FAMILY_STM32"],
@@ -1314,6 +1376,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0780"],
@@ -1333,6 +1399,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0790"],
@@ -1351,6 +1421,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0715"],
@@ -1369,6 +1443,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0760"],
@@ -1403,6 +1481,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0770"],
@@ -1421,14 +1503,38 @@
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
- "detect_code": ["0770"],
+ "detect_code": ["0779"],
"device_has_add": ["ANALOGOUT", "LOWPOWERTIMER", "SERIAL_FC", "SERIAL_ASYNCH", "CAN", "TRNG", "FLASH"],
"release_versions": ["2", "5"],
"device_name": "STM32L433RC",
"bootloader_supported": true
},
+ "MTB_ADV_WISE_1510": {
+ "inherits": ["FAMILY_STM32"],
+ "supported_form_factors": ["ARDUINO"],
+ "core": "Cortex-M4F",
+ "extra_labels_add": ["STM32L4", "STM32L443xC", "STM32L443RC"],
+ "config": {
+ "clock_source": {
+ "help": "Mask value : USE_PLL_HSI | USE_PLL_MSI",
+ "value": "USE_PLL_HSI",
+ "macro_name": "CLOCK_SOURCE"
+ }
+ },
+ "overrides": {"lse_available": 0},
+ "release_versions": ["5"],
+ "device_has_add": ["ANALOGOUT", "SERIAL_FC", "SERIAL_ASYNCH", "CAN", "TRNG", "FLASH"],
+ "macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT"],
+ "device_name" : "STM32L443RC",
+ "detect_code": ["0458"],
+ "bootloader_supported": true
+ },
"NUCLEO_L476RG": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
@@ -1439,6 +1545,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0765"],
@@ -1476,6 +1586,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0827"],
@@ -1484,6 +1598,23 @@
"release_versions": ["2", "5"],
"device_name": "STM32L486RG"
},
+ "MTB_ADV_WISE_1570": {
+ "inherits": ["FAMILY_STM32"],
+ "core": "Cortex-M4F",
+ "extra_labels_add": ["STM32L4", "STM32L486RG", "STM32L486xG", "WISE_1570"],
+ "config": {
+ "clock_source": {
+ "help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
+ "value": "USE_PLL_HSE_XTAL",
+ "macro_name": "CLOCK_SOURCE"
+ }
+ },
+ "detect_code": ["0460"],
+ "macros_add": ["MBEDTLS_CONFIG_HW_SUPPORT", "WISE_1570"],
+ "device_has_add": ["ANALOGOUT", "LOWPOWERTIMER", "SERIAL_ASYNCH", "SERIAL_FC", "TRNG", "FLASH"],
+ "release_versions": ["5"],
+ "device_name": "STM32L486RG"
+ },
"ARCH_MAX": {
"inherits": ["FAMILY_STM32"],
"supported_form_factors": ["ARDUINO"],
@@ -1550,10 +1681,18 @@
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M4F",
"extra_labels_add": ["STM32F4", "STM32F407", "STM32F407xG", "STM32F407VG"],
- "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+ "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+ "config": {
+ "clock_source": {
+ "help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL | USE_PLL_HSI",
+ "value": "USE_PLL_HSE_XTAL|USE_PLL_HSI",
+ "macro_name": "CLOCK_SOURCE"
+ }
+ },
"macros_add": ["USB_STM_HAL"],
"overrides": {"lse_available": 0},
"device_has_add": ["ANALOGOUT"],
+ "release_versions": ["2", "5"],
"device_name": "STM32F407VG"
},
"DISCO_F429ZI": {
@@ -1606,6 +1745,11 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSE_EXTC|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
+
}
},
"overrides": {"lse_available": 0},
@@ -1617,13 +1761,17 @@
"DISCO_L072CZ_LRWAN1": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M0+",
- "extra_labels_add": ["STM32L0", "STM32L072CZ", "STM32L072xx"],
+ "extra_labels_add": ["STM32L0", "STM32L072CZ", "STM32L072xZ", "STM32L072xx"],
"supported_form_factors": ["ARDUINO", "MORPHO"],
"config": {
"clock_source": {
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI",
"value": "USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0833"],
@@ -1631,6 +1779,15 @@
"release_versions": ["2", "5"],
"device_name": "STM32L072CZ"
},
+ "MTB_MURATA_ABZ": {
+ "inherits": ["FAMILY_STM32"],
+ "core": "Cortex-M0+",
+ "extra_labels_add": ["STM32L0", "STM32L0x2xZ", "STM32L082CZ", "STM32L082xx"],
+ "detect_code": ["0456"],
+ "device_has_add": ["ANALOGOUT", "SERIAL_FC", "SERIAL_ASYNCH", "TRNG", "FLASH"],
+ "release_versions": ["5"],
+ "device_name": "STM32L082CZ"
+ },
"DISCO_F746NG": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M7F",
@@ -1645,6 +1802,10 @@
"usb_speed": {
"help": "Select the USB speed/connector (0=FullSpeed, 1=HighSpeed)",
"value": "1"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0815"],
@@ -1664,6 +1825,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC | USE_PLL_HSE_XTAL | USE_PLL_HSI",
"value": "USE_PLL_HSE_XTAL|USE_PLL_HSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0817"],
@@ -1682,6 +1847,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"supported_form_factors": ["ARDUINO"],
@@ -1701,6 +1870,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0820"],
@@ -1759,6 +1932,42 @@
"release_versions": ["2", "5"],
"device_name": "STM32F411RE"
},
+ "MTB_MTS_DRAGONFLY": {
+ "inherits": ["FAMILY_STM32"],
+ "core": "Cortex-M4F",
+ "extra_labels_add": ["STM32F4", "STM32F411RE"],
+ "config": {
+ "modem_is_on_board": {
+ "help": "Value: Tells the build system that the modem is on-board as oppose to a plug-in shield/module.",
+ "value": 1,
+ "macro_name": "MODEM_ON_BOARD"
+ },
+ "modem_data_connection_type": {
+ "help": "Value: Defines how an on-board modem is wired up to the MCU, e.g., data connection can be a UART or USB and so forth.",
+ "value": 1,
+ "macro_name": "MODEM_ON_BOARD_UART"
+ },
+ "stdio_uart_tx": {
+ "help": "Value PB_6",
+ "value": "PB_6"
+ },
+ "stdio_uart_rx": {
+ "help": "Value PB_7",
+ "value": "PB_7"
+ }
+ },
+ "overrides": {
+ "lse_available": 0
+ },
+ "macros_add": ["HSE_VALUE=26000000", "VECT_TAB_OFFSET=0x08010000"],
+ "post_binary_hook": {
+ "function": "MTSCode.combine_bins_mtb_mts_dragonfly",
+ "toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO", "IAR"]
+ },
+ "release_versions": ["2", "5"],
+ "device_name": "STM32F411RE",
+ "bootloader_supported": true
+ },
"XDOT_L151CC": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
@@ -1781,6 +1990,31 @@
"inherits": ["XDOT_L151CC"],
"detect_code": ["8080"]
},
+ "MTB_MTS_XDOT": {
+ "inherits": ["FAMILY_STM32"],
+ "core": "Cortex-M3",
+ "default_toolchain": "ARM",
+ "extra_labels_add": ["STM32L1", "STM32L151CC"],
+ "config": {
+ "hse_value": {
+ "value": "24000000",
+ "macro_name": "HSE_VALUE"
+ },
+ "stdio_uart_tx": {
+ "help": "Value PA_2",
+ "value": "PA_2"
+ },
+ "stdio_uart_rx": {
+ "help": "Value PA_3",
+ "value": "PA_3"
+ }
+ },
+ "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+ "device_has_add": ["ANALOGOUT", "FLASH"],
+ "release_versions": ["5"],
+ "device_name": "STM32L151CC",
+ "bootloader_supported": true
+ },
"MOTE_L152RC": {
"inherits": ["FAMILY_STM32"],
"core": "Cortex-M3",
@@ -1818,18 +2052,13 @@
"supported_form_factors": ["ARDUINO"],
"release_versions": ["5"],
"config": {
- "usb_tx": {
+ "stdio_uart_tx": {
"help": "Value: D8(default) or D1",
"value": "D8"
},
- "usb_rx": {
+ "stdio_uart_rx": {
"help": "Value: D2(default) or D0",
"value": "D2"
- },
- "stdio_uart": {
- "help": "Value: UART_1(default) or UART_3",
- "value": "UART_1",
- "macro_name": "STDIO_UART"
}
}
},
@@ -1837,39 +2066,19 @@
"inherits": ["MODULE_UBLOX_ODIN_W2"],
"release_versions": ["5"],
"config": {
- "usb_tx": {
+ "stdio_uart_tx": {
"help": "Value: PA_9(default) or PD_8",
"value": "PA_9"
},
- "usb_rx": {
+ "stdio_uart_rx": {
"help": "Value: PA_10(default) or PD_9",
"value": "PA_10"
- },
- "stdio_uart": {
- "help": "Value: UART_1(default) or UART_3",
- "value": "UART_1",
- "macro_name": "STDIO_UART"
}
}
},
"MTB_UBLOX_ODIN_W2": {
"inherits": ["MODULE_UBLOX_ODIN_W2"],
- "release_versions": ["5"],
- "config": {
- "usb_tx": {
- "help": "Value PA_11",
- "value": "PA_11"
- },
- "usb_rx": {
- "help": "Value PA_13",
- "value": "PA_13"
- },
- "stdio_uart": {
- "help": "Value: UART_1",
- "value": "UART_1",
- "macro_name": "STDIO_UART"
- }
- }
+ "release_versions": ["5"]
},
"UBLOX_C030": {
"inherits": ["FAMILY_STM32"],
@@ -2313,6 +2522,31 @@
"extra_labels_add": ["MTM_CONNECT04S"],
"macros_add": ["TARGET_MTM_CONNECT04S"]
},
+ "MTB_LAIRD_BL600": {
+ "inherits": ["MCU_NRF51_32K_UNIFIED"],
+ "device_has": ["ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "device_name": "nRF51822_xxAA",
+ "release_versions" : ["5"],
+ "extra_labels_add": ["MTB_LAIRD_BL600"],
+ "config": {
+ "usb_tx": {
+ "help": "Value SIO_21",
+ "value": "SIO_21"
+ },
+ "usb_rx": {
+ "help": "Value SIO_22",
+ "value": "SIO_22"
+ },
+ "stdio_uart": {
+ "help": "Value: UART_0",
+ "value": "UART_0",
+ "macro_name": "STDIO_UART"
+ }
+ },
+ "overrides": {
+ "uart_hwfc": 0
+ }
+ },
"TY51822R3": {
"inherits": ["MCU_NRF51_32K_UNIFIED"],
"macros_add": ["TARGET_NRF_32MHZ_XTAL"],
@@ -2426,29 +2660,35 @@
"features": ["BLE"],
"release_versions": ["2", "5"]
},
- "RZ_A1H": {
- "supported_form_factors": ["ARDUINO"],
+ "RZ_A1XX": {
+ "inherits": ["Target"],
"core": "Cortex-A9",
- "program_cycle_s": 2,
- "extra_labels": ["RENESAS", "MBRZA1H"],
"supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
- "inherits": ["Target"],
+ "extra_labels": ["RENESAS", "RZ_A1XX"],
"device_has": ["ANALOGIN", "CAN", "ETHERNET", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
"features": ["LWIP"],
+ "program_cycle_s": 2
+ },
+ "RZ_A1H": {
+ "inherits": ["RZ_A1XX"],
+ "supported_form_factors": ["ARDUINO"],
+ "extra_labels_add": ["RZA1H", "MBRZA1H"],
"release_versions": ["2", "5"]
},
"VK_RZ_A1H": {
- "inherits": ["Target"],
- "core": "Cortex-A9",
- "extra_labels": ["RENESAS", "VKRZA1H"],
- "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
- "default_toolchain": "ARM",
- "program_cycle_s": 2,
- "device_has": ["ANALOGIN", "CAN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
- "features": ["LWIP"],
- "default_lib": "std",
+ "inherits": ["RZ_A1XX"],
+ "extra_labels": ["RZA1H", "VKRZA1H"],
"release_versions": []
},
+ "GR_LYCHEE": {
+ "inherits": ["RZ_A1XX"],
+ "supported_form_factors": ["ARDUINO"],
+ "extra_labels_add": ["RZA1UL", "MBRZA1LU"],
+ "device_has_add": ["TRNG"],
+ "device_has_remove": ["ETHERNET"],
+ "features_remove": ["LWIP"],
+ "release_versions": ["2", "5"]
+ },
"MAXWSNENV": {
"inherits": ["Target"],
"core": "Cortex-M3",
@@ -3247,6 +3487,28 @@
"release_versions": ["2", "5"],
"device_name": "nRF52832_xxAA"
},
+ "MTB_UBLOX_NINA_B1": {
+ "inherits": ["MCU_NRF52"],
+ "macros_add": ["BOARD_PCA10040", "NRF52_PAN_12", "NRF52_PAN_15", "NRF52_PAN_58", "NRF52_PAN_55", "NRF52_PAN_54", "NRF52_PAN_31", "NRF52_PAN_30", "NRF52_PAN_51", "NRF52_PAN_36", "NRF52_PAN_53", "S132", "CONFIG_GPIO_AS_PINRESET", "BLE_STACK_SUPPORT_REQD", "SWI_DISABLE0", "NRF52_PAN_20", "NRF52_PAN_64", "NRF52_PAN_62", "NRF52_PAN_63"],
+ "device_has_add": ["ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
+ "extra_labels_add": ["MTB_UBLOX_NINA_B1"],
+ "release_versions": ["5"],
+ "device_name": "nRF52832_xxAA",
+ "bootloader_supported": true,
+ "overrides": {
+ "uart_hwfc": 0
+ },
+ "config": {
+ "usb_tx": {
+ "help": "Value p6",
+ "value": "p6"
+ },
+ "usb_rx": {
+ "help": "Value p5",
+ "value": "p5"
+ }
+ }
+ },
"DELTA_DFBM_NQ620": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF52"],
@@ -3389,7 +3651,7 @@
"post_binary_hook": {"function": "NCS36510TargetCode.ncs36510_addfib"},
"macros": ["CM3", "CPU_NCS36510", "TARGET_NCS36510", "LOAD_ADDRESS=0x3000"],
"supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
- "device_has": ["ANALOGIN", "SERIAL", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "LOWPOWERTIMER", "TRNG", "SPISLAVE"],
+ "device_has": ["ANALOGIN", "SERIAL", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "LOWPOWERTIMER", "TRNG", "SPISLAVE"],
"release_versions": ["2", "5"]
},
"NUMAKER_PFM_M453": {
@@ -3499,23 +3761,31 @@
"VBLUNO51_LEGACY": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K"],
+ "detect_code": ["C006"],
+ "overrides": {"uart_hwfc": 0},
"extra_labels_add": ["VBLUNO51"]
},
"VBLUNO51_BOOT": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_BOOT"],
+ "detect_code": ["C006"],
+ "overrides": {"uart_hwfc": 0},
"extra_labels_add": ["VBLUNO51"],
"macros_add": ["TARGET_VBLUNO51"]
},
"VBLUNO51_OTA": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_OTA"],
+ "detect_code": ["C006"],
+ "overrides": {"uart_hwfc": 0},
"extra_labels_add": ["VBLUNO51"],
"macros_add": ["TARGET_VBLUNO51"]
},
"VBLUNO51": {
"supported_form_factors": ["ARDUINO"],
"inherits": ["MCU_NRF51_32K_UNIFIED"],
+ "detect_code": ["C006"],
+ "overrides": {"uart_hwfc": 0},
"device_has": ["ANALOGIN", "I2C", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPI_ASYNCH", "SPISLAVE"],
"release_versions": ["2"],
"device_name": "nRF51822_xxAC"
@@ -3530,6 +3800,10 @@
"help": "Mask value : USE_PLL_HSE_EXTC (need HW patch) | USE_PLL_HSE_XTAL (need HW patch) | USE_PLL_HSI | USE_PLL_MSI",
"value": "USE_PLL_MSI",
"macro_name": "CLOCK_SOURCE"
+ },
+ "lowpowertimer_lptim": {
+ "help": "This target supports LPTIM. Set value 1 to use LPTIM for LOWPOWERTIMER, or 0 to use RTC wakeup timer",
+ "value": 1
}
},
"detect_code": ["0823"],