Diff: targets/TARGET_RENESAS/TARGET_RZ_A1H/PeripheralNames.h

Revision:

182:57724642e740

Parent:

181:96ed750bd169

--- a/targets/TARGET_RENESAS/TARGET_RZ_A1H/PeripheralNames.h	Wed Jan 17 15:23:54 2018 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,159 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    UART0,
-    UART1,
-    UART2,
-    UART3,
-    UART4,
-    UART5,
-    UART6,
-    UART7,
-} UARTName;
-
-// PWMType & 1 == 1 then have to use PWDTR[12] == 1
-typedef enum {
-    PWM1A  = 0,
-    PWM1B,
-    PWM1C,
-    PWM1D,
-    PWM1E,
-    PWM1F,
-    PWM1G,
-    PWM1H,
-    PWM2A  = 0x10,
-    PWM2B,
-    PWM2C,
-    PWM2D,
-    PWM2E,
-    PWM2F,
-    PWM2G,
-    PWM2H,
-} PWMType;
-
-typedef enum {
-    TIOC0A  = 0,
-    TIOC0B,
-    TIOC0C,
-    TIOC0D,
-    TIOC1A = 0x10,
-    TIOC1B,
-    TIOC2A = 0x20,
-    TIOC2B,
-    TIOC3A = 0x30,
-    TIOC3B,
-    TIOC3C,
-    TIOC3D,
-    TIOC4A = 0x40,
-    TIOC4B,
-    TIOC4C,
-    TIOC4D,
-} MTU2_PWMType;
-
-typedef enum {
-    PWM0_PIN  = 0,
-    PWM1_PIN,
-    PWM2_PIN,
-    PWM3_PIN,
-    PWM4_PIN,
-    PWM5_PIN,
-    PWM6_PIN,
-    PWM7_PIN,
-    PWM8_PIN,
-    PWM9_PIN,
-    PWM10_PIN,
-    PWM11_PIN,
-    PWM12_PIN,
-    PWM13_PIN,
-    MTU2_PWM0_PIN = 0x20,
-    MTU2_PWM1_PIN,
-    MTU2_PWM2_PIN,
-    MTU2_PWM3_PIN,
-    MTU2_PWM4_PIN,
-    MTU2_PWM5_PIN,
-    MTU2_PWM6_PIN,
-    MTU2_PWM7_PIN,
-    MTU2_PWM8_PIN,
-    MTU2_PWM9_PIN,
-    MTU2_PWM10_PIN,
-    MTU2_PWM11_PIN,
-    MTU2_PWM12_PIN,
-    MTU2_PWM13_PIN,
-    MTU2_PWM14_PIN,
-    MTU2_PWM15_PIN,
-    MTU2_PWM16_PIN,
-    MTU2_PWM17_PIN,
-    MTU2_PWM18_PIN,
-    MTU2_PWM19_PIN,
-    MTU2_PWM20_PIN,
-    MTU2_PWM21_PIN,
-} PWMName;
-
-typedef enum {
-    AN0= 0,
-    AN1= 1,
-    AN2= 2,
-    AN3= 3,
-    AN4= 4,
-    AN5= 5,
-    AN6= 6,
-    AN7= 7,
-} ADCName;
-
-typedef enum {
-    SPI_0 = 0,
-    SPI_1,
-    SPI_2,
-    SPI_3,
-} SPIName;
-
-typedef enum {
-    I2C_0 = 0,
-    I2C_1,
-    I2C_2,
-    I2C_3 
-} I2CName;
-
-typedef enum {
-    CAN_0 = 0,
-    CAN_1,
-    CAN_2,
-    CAN_3, 
-    CAN_4
-} CANName;
-
-
-#define STDIO_UART_TX     USBTX
-#define STDIO_UART_RX     USBRX
-#define STDIO_UART        UART2
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif