mbed
Fork of mbed-dev by
targets/TARGET_STM/stm_spi_api.c@160:d5399cc887bb, 2017-03-14 (annotated)
- Committer:
- <>
- Date:
- Tue Mar 14 16:40:56 2017 +0000
- Revision:
- 160:d5399cc887bb
- Parent:
- 159:612c381a210f
- Child:
- 165:e614a9f1c9e2
This updates the lib to the mbed lib v138
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 149:156823d33999 | 1 | /* mbed Microcontroller Library |
<> | 149:156823d33999 | 2 | ******************************************************************************* |
<> | 149:156823d33999 | 3 | * Copyright (c) 2015, STMicroelectronics |
<> | 149:156823d33999 | 4 | * All rights reserved. |
<> | 149:156823d33999 | 5 | * |
<> | 149:156823d33999 | 6 | * Redistribution and use in source and binary forms, with or without |
<> | 149:156823d33999 | 7 | * modification, are permitted provided that the following conditions are met: |
<> | 149:156823d33999 | 8 | * |
<> | 149:156823d33999 | 9 | * 1. Redistributions of source code must retain the above copyright notice, |
<> | 149:156823d33999 | 10 | * this list of conditions and the following disclaimer. |
<> | 149:156823d33999 | 11 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
<> | 149:156823d33999 | 12 | * this list of conditions and the following disclaimer in the documentation |
<> | 149:156823d33999 | 13 | * and/or other materials provided with the distribution. |
<> | 149:156823d33999 | 14 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
<> | 149:156823d33999 | 15 | * may be used to endorse or promote products derived from this software |
<> | 149:156823d33999 | 16 | * without specific prior written permission. |
<> | 149:156823d33999 | 17 | * |
<> | 149:156823d33999 | 18 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
<> | 149:156823d33999 | 19 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
<> | 149:156823d33999 | 20 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
<> | 149:156823d33999 | 21 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
<> | 149:156823d33999 | 22 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
<> | 149:156823d33999 | 23 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
<> | 149:156823d33999 | 24 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
<> | 149:156823d33999 | 25 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
<> | 149:156823d33999 | 26 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
<> | 149:156823d33999 | 27 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
<> | 149:156823d33999 | 28 | ******************************************************************************* |
<> | 149:156823d33999 | 29 | */ |
<> | 149:156823d33999 | 30 | #include "mbed_assert.h" |
<> | 149:156823d33999 | 31 | #include "mbed_error.h" |
<> | 149:156823d33999 | 32 | #include "spi_api.h" |
<> | 149:156823d33999 | 33 | |
<> | 149:156823d33999 | 34 | #if DEVICE_SPI |
<> | 149:156823d33999 | 35 | #include <stdbool.h> |
<> | 149:156823d33999 | 36 | #include <math.h> |
<> | 149:156823d33999 | 37 | #include <string.h> |
<> | 149:156823d33999 | 38 | #include "cmsis.h" |
<> | 149:156823d33999 | 39 | #include "pinmap.h" |
<> | 149:156823d33999 | 40 | #include "PeripheralPins.h" |
<> | 149:156823d33999 | 41 | |
<> | 149:156823d33999 | 42 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 43 | #define SPI_INST(obj) ((SPI_TypeDef *)(obj->spi.spi)) |
<> | 149:156823d33999 | 44 | #else |
<> | 149:156823d33999 | 45 | #define SPI_INST(obj) ((SPI_TypeDef *)(obj->spi)) |
<> | 149:156823d33999 | 46 | #endif |
<> | 149:156823d33999 | 47 | |
<> | 149:156823d33999 | 48 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 49 | #define SPI_S(obj) (( struct spi_s *)(&(obj->spi))) |
<> | 149:156823d33999 | 50 | #else |
<> | 149:156823d33999 | 51 | #define SPI_S(obj) (( struct spi_s *)(obj)) |
<> | 149:156823d33999 | 52 | #endif |
<> | 149:156823d33999 | 53 | |
<> | 149:156823d33999 | 54 | #ifndef DEBUG_STDIO |
<> | 149:156823d33999 | 55 | # define DEBUG_STDIO 0 |
<> | 149:156823d33999 | 56 | #endif |
<> | 149:156823d33999 | 57 | |
<> | 149:156823d33999 | 58 | #if DEBUG_STDIO |
<> | 149:156823d33999 | 59 | # include <stdio.h> |
<> | 149:156823d33999 | 60 | # define DEBUG_PRINTF(...) do { printf(__VA_ARGS__); } while(0) |
<> | 149:156823d33999 | 61 | #else |
<> | 149:156823d33999 | 62 | # define DEBUG_PRINTF(...) {} |
<> | 149:156823d33999 | 63 | #endif |
<> | 149:156823d33999 | 64 | |
<> | 149:156823d33999 | 65 | void init_spi(spi_t *obj) |
<> | 149:156823d33999 | 66 | { |
<> | 149:156823d33999 | 67 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 68 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 69 | |
<> | 149:156823d33999 | 70 | __HAL_SPI_DISABLE(handle); |
<> | 149:156823d33999 | 71 | |
<> | 149:156823d33999 | 72 | DEBUG_PRINTF("init_spi: instance=0x%8X\r\n", (int)handle->Instance); |
<> | 149:156823d33999 | 73 | if (HAL_SPI_Init(handle) != HAL_OK) { |
<> | 149:156823d33999 | 74 | error("Cannot initialize SPI"); |
<> | 149:156823d33999 | 75 | } |
<> | 149:156823d33999 | 76 | |
<> | 149:156823d33999 | 77 | __HAL_SPI_ENABLE(handle); |
<> | 149:156823d33999 | 78 | } |
<> | 149:156823d33999 | 79 | |
<> | 149:156823d33999 | 80 | void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) |
<> | 149:156823d33999 | 81 | { |
<> | 149:156823d33999 | 82 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 83 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 84 | |
<> | 149:156823d33999 | 85 | // Determine the SPI to use |
<> | 149:156823d33999 | 86 | SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI); |
<> | 149:156823d33999 | 87 | SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO); |
<> | 149:156823d33999 | 88 | SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK); |
<> | 149:156823d33999 | 89 | SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL); |
<> | 149:156823d33999 | 90 | |
<> | 149:156823d33999 | 91 | SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso); |
<> | 149:156823d33999 | 92 | SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel); |
<> | 149:156823d33999 | 93 | |
<> | 149:156823d33999 | 94 | spiobj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl); |
<> | 149:156823d33999 | 95 | MBED_ASSERT(spiobj->spi != (SPIName)NC); |
<> | 149:156823d33999 | 96 | |
<> | 149:156823d33999 | 97 | #if defined SPI1_BASE |
<> | 149:156823d33999 | 98 | // Enable SPI clock |
<> | 149:156823d33999 | 99 | if (spiobj->spi == SPI_1) { |
<> | 149:156823d33999 | 100 | __HAL_RCC_SPI1_CLK_ENABLE(); |
<> | 149:156823d33999 | 101 | spiobj->spiIRQ = SPI1_IRQn; |
<> | 149:156823d33999 | 102 | } |
<> | 149:156823d33999 | 103 | #endif |
<> | 149:156823d33999 | 104 | |
<> | 149:156823d33999 | 105 | #if defined SPI2_BASE |
<> | 149:156823d33999 | 106 | if (spiobj->spi == SPI_2) { |
<> | 149:156823d33999 | 107 | __HAL_RCC_SPI2_CLK_ENABLE(); |
<> | 149:156823d33999 | 108 | spiobj->spiIRQ = SPI2_IRQn; |
<> | 149:156823d33999 | 109 | } |
<> | 149:156823d33999 | 110 | #endif |
<> | 149:156823d33999 | 111 | |
<> | 149:156823d33999 | 112 | #if defined SPI3_BASE |
<> | 149:156823d33999 | 113 | if (spiobj->spi == SPI_3) { |
<> | 149:156823d33999 | 114 | __HAL_RCC_SPI3_CLK_ENABLE(); |
<> | 149:156823d33999 | 115 | spiobj->spiIRQ = SPI3_IRQn; |
<> | 149:156823d33999 | 116 | } |
<> | 149:156823d33999 | 117 | #endif |
<> | 149:156823d33999 | 118 | |
<> | 149:156823d33999 | 119 | #if defined SPI4_BASE |
<> | 149:156823d33999 | 120 | if (spiobj->spi == SPI_4) { |
<> | 149:156823d33999 | 121 | __HAL_RCC_SPI4_CLK_ENABLE(); |
<> | 149:156823d33999 | 122 | spiobj->spiIRQ = SPI4_IRQn; |
<> | 149:156823d33999 | 123 | } |
<> | 149:156823d33999 | 124 | #endif |
<> | 149:156823d33999 | 125 | |
<> | 149:156823d33999 | 126 | #if defined SPI5_BASE |
<> | 149:156823d33999 | 127 | if (spiobj->spi == SPI_5) { |
<> | 149:156823d33999 | 128 | __HAL_RCC_SPI5_CLK_ENABLE(); |
<> | 149:156823d33999 | 129 | spiobj->spiIRQ = SPI5_IRQn; |
<> | 149:156823d33999 | 130 | } |
<> | 149:156823d33999 | 131 | #endif |
<> | 149:156823d33999 | 132 | |
<> | 149:156823d33999 | 133 | #if defined SPI6_BASE |
<> | 149:156823d33999 | 134 | if (spiobj->spi == SPI_6) { |
<> | 149:156823d33999 | 135 | __HAL_RCC_SPI6_CLK_ENABLE(); |
<> | 149:156823d33999 | 136 | spiobj->spiIRQ = SPI6_IRQn; |
<> | 149:156823d33999 | 137 | } |
<> | 149:156823d33999 | 138 | #endif |
<> | 149:156823d33999 | 139 | |
<> | 149:156823d33999 | 140 | // Configure the SPI pins |
<> | 149:156823d33999 | 141 | pinmap_pinout(mosi, PinMap_SPI_MOSI); |
<> | 149:156823d33999 | 142 | pinmap_pinout(miso, PinMap_SPI_MISO); |
<> | 149:156823d33999 | 143 | pinmap_pinout(sclk, PinMap_SPI_SCLK); |
<> | 149:156823d33999 | 144 | spiobj->pin_miso = miso; |
<> | 149:156823d33999 | 145 | spiobj->pin_mosi = mosi; |
<> | 149:156823d33999 | 146 | spiobj->pin_sclk = sclk; |
<> | 149:156823d33999 | 147 | spiobj->pin_ssel = ssel; |
<> | 149:156823d33999 | 148 | if (ssel != NC) { |
<> | 149:156823d33999 | 149 | pinmap_pinout(ssel, PinMap_SPI_SSEL); |
<> | 149:156823d33999 | 150 | } else { |
<> | 149:156823d33999 | 151 | handle->Init.NSS = SPI_NSS_SOFT; |
<> | 149:156823d33999 | 152 | } |
<> | 149:156823d33999 | 153 | |
<> | 149:156823d33999 | 154 | /* Fill default value */ |
<> | 149:156823d33999 | 155 | handle->Instance = SPI_INST(obj); |
<> | 149:156823d33999 | 156 | handle->Init.Mode = SPI_MODE_MASTER; |
<> | 149:156823d33999 | 157 | handle->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256; |
<> | 149:156823d33999 | 158 | handle->Init.Direction = SPI_DIRECTION_2LINES; |
<> | 149:156823d33999 | 159 | handle->Init.CLKPhase = SPI_PHASE_1EDGE; |
<> | 149:156823d33999 | 160 | handle->Init.CLKPolarity = SPI_POLARITY_LOW; |
<> | 149:156823d33999 | 161 | handle->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED; |
<> | 149:156823d33999 | 162 | handle->Init.CRCPolynomial = 7; |
<> | 149:156823d33999 | 163 | handle->Init.DataSize = SPI_DATASIZE_8BIT; |
<> | 149:156823d33999 | 164 | handle->Init.FirstBit = SPI_FIRSTBIT_MSB; |
<> | 149:156823d33999 | 165 | handle->Init.TIMode = SPI_TIMODE_DISABLED; |
<> | 149:156823d33999 | 166 | |
<> | 149:156823d33999 | 167 | init_spi(obj); |
<> | 149:156823d33999 | 168 | } |
<> | 149:156823d33999 | 169 | |
<> | 149:156823d33999 | 170 | void spi_free(spi_t *obj) |
<> | 149:156823d33999 | 171 | { |
<> | 149:156823d33999 | 172 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 173 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 174 | |
<> | 149:156823d33999 | 175 | DEBUG_PRINTF("spi_free\r\n"); |
<> | 149:156823d33999 | 176 | |
<> | 149:156823d33999 | 177 | __HAL_SPI_DISABLE(handle); |
<> | 149:156823d33999 | 178 | HAL_SPI_DeInit(handle); |
<> | 149:156823d33999 | 179 | |
<> | 149:156823d33999 | 180 | #if defined SPI1_BASE |
<> | 149:156823d33999 | 181 | // Reset SPI and disable clock |
<> | 149:156823d33999 | 182 | if (spiobj->spi == SPI_1) { |
<> | 149:156823d33999 | 183 | __HAL_RCC_SPI1_FORCE_RESET(); |
<> | 149:156823d33999 | 184 | __HAL_RCC_SPI1_RELEASE_RESET(); |
<> | 149:156823d33999 | 185 | __HAL_RCC_SPI1_CLK_DISABLE(); |
<> | 149:156823d33999 | 186 | } |
<> | 149:156823d33999 | 187 | #endif |
<> | 149:156823d33999 | 188 | #if defined SPI2_BASE |
<> | 149:156823d33999 | 189 | if (spiobj->spi == SPI_2) { |
<> | 149:156823d33999 | 190 | __HAL_RCC_SPI2_FORCE_RESET(); |
<> | 149:156823d33999 | 191 | __HAL_RCC_SPI2_RELEASE_RESET(); |
<> | 149:156823d33999 | 192 | __HAL_RCC_SPI2_CLK_DISABLE(); |
<> | 149:156823d33999 | 193 | } |
<> | 149:156823d33999 | 194 | #endif |
<> | 149:156823d33999 | 195 | |
<> | 149:156823d33999 | 196 | #if defined SPI3_BASE |
<> | 149:156823d33999 | 197 | if (spiobj->spi == SPI_3) { |
<> | 149:156823d33999 | 198 | __HAL_RCC_SPI3_FORCE_RESET(); |
<> | 149:156823d33999 | 199 | __HAL_RCC_SPI3_RELEASE_RESET(); |
<> | 149:156823d33999 | 200 | __HAL_RCC_SPI3_CLK_DISABLE(); |
<> | 149:156823d33999 | 201 | } |
<> | 149:156823d33999 | 202 | #endif |
<> | 149:156823d33999 | 203 | |
<> | 149:156823d33999 | 204 | #if defined SPI4_BASE |
<> | 149:156823d33999 | 205 | if (spiobj->spi == SPI_4) { |
<> | 149:156823d33999 | 206 | __HAL_RCC_SPI4_FORCE_RESET(); |
<> | 149:156823d33999 | 207 | __HAL_RCC_SPI4_RELEASE_RESET(); |
<> | 149:156823d33999 | 208 | __HAL_RCC_SPI4_CLK_DISABLE(); |
<> | 149:156823d33999 | 209 | } |
<> | 149:156823d33999 | 210 | #endif |
<> | 149:156823d33999 | 211 | |
<> | 149:156823d33999 | 212 | #if defined SPI5_BASE |
<> | 149:156823d33999 | 213 | if (spiobj->spi == SPI_5) { |
<> | 149:156823d33999 | 214 | __HAL_RCC_SPI5_FORCE_RESET(); |
<> | 149:156823d33999 | 215 | __HAL_RCC_SPI5_RELEASE_RESET(); |
<> | 149:156823d33999 | 216 | __HAL_RCC_SPI5_CLK_DISABLE(); |
<> | 149:156823d33999 | 217 | } |
<> | 149:156823d33999 | 218 | #endif |
<> | 149:156823d33999 | 219 | |
<> | 149:156823d33999 | 220 | #if defined SPI6_BASE |
<> | 149:156823d33999 | 221 | if (spiobj->spi == SPI_6) { |
<> | 149:156823d33999 | 222 | __HAL_RCC_SPI6_FORCE_RESET(); |
<> | 149:156823d33999 | 223 | __HAL_RCC_SPI6_RELEASE_RESET(); |
<> | 149:156823d33999 | 224 | __HAL_RCC_SPI6_CLK_DISABLE(); |
<> | 149:156823d33999 | 225 | } |
<> | 149:156823d33999 | 226 | #endif |
<> | 149:156823d33999 | 227 | |
<> | 149:156823d33999 | 228 | // Configure GPIOs |
<> | 149:156823d33999 | 229 | pin_function(spiobj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)); |
<> | 149:156823d33999 | 230 | pin_function(spiobj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)); |
<> | 149:156823d33999 | 231 | pin_function(spiobj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)); |
<> | 149:156823d33999 | 232 | if (handle->Init.NSS != SPI_NSS_SOFT) { |
<> | 149:156823d33999 | 233 | pin_function(spiobj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)); |
<> | 149:156823d33999 | 234 | } |
<> | 149:156823d33999 | 235 | } |
<> | 149:156823d33999 | 236 | |
<> | 149:156823d33999 | 237 | void spi_format(spi_t *obj, int bits, int mode, int slave) |
<> | 149:156823d33999 | 238 | { |
<> | 149:156823d33999 | 239 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 240 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 241 | |
<> | 149:156823d33999 | 242 | DEBUG_PRINTF("spi_format, bits:%d, mode:%d, slave?:%d\r\n", bits, mode, slave); |
<> | 149:156823d33999 | 243 | |
<> | 149:156823d33999 | 244 | // Save new values |
<> | 149:156823d33999 | 245 | handle->Init.DataSize = (bits == 16) ? SPI_DATASIZE_16BIT : SPI_DATASIZE_8BIT; |
<> | 149:156823d33999 | 246 | |
<> | 149:156823d33999 | 247 | switch (mode) { |
<> | 149:156823d33999 | 248 | case 0: |
<> | 149:156823d33999 | 249 | handle->Init.CLKPolarity = SPI_POLARITY_LOW; |
<> | 149:156823d33999 | 250 | handle->Init.CLKPhase = SPI_PHASE_1EDGE; |
<> | 149:156823d33999 | 251 | break; |
<> | 149:156823d33999 | 252 | case 1: |
<> | 149:156823d33999 | 253 | handle->Init.CLKPolarity = SPI_POLARITY_LOW; |
<> | 149:156823d33999 | 254 | handle->Init.CLKPhase = SPI_PHASE_2EDGE; |
<> | 149:156823d33999 | 255 | break; |
<> | 149:156823d33999 | 256 | case 2: |
<> | 149:156823d33999 | 257 | handle->Init.CLKPolarity = SPI_POLARITY_HIGH; |
<> | 149:156823d33999 | 258 | handle->Init.CLKPhase = SPI_PHASE_1EDGE; |
<> | 149:156823d33999 | 259 | break; |
<> | 149:156823d33999 | 260 | default: |
<> | 149:156823d33999 | 261 | handle->Init.CLKPolarity = SPI_POLARITY_HIGH; |
<> | 149:156823d33999 | 262 | handle->Init.CLKPhase = SPI_PHASE_2EDGE; |
<> | 149:156823d33999 | 263 | break; |
<> | 149:156823d33999 | 264 | } |
<> | 149:156823d33999 | 265 | |
<> | 149:156823d33999 | 266 | if (handle->Init.NSS != SPI_NSS_SOFT) { |
<> | 149:156823d33999 | 267 | handle->Init.NSS = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT; |
<> | 149:156823d33999 | 268 | } |
<> | 149:156823d33999 | 269 | |
<> | 149:156823d33999 | 270 | handle->Init.Mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER; |
<> | 149:156823d33999 | 271 | |
<> | 149:156823d33999 | 272 | init_spi(obj); |
<> | 149:156823d33999 | 273 | } |
<> | 149:156823d33999 | 274 | |
<> | 149:156823d33999 | 275 | /* |
<> | 149:156823d33999 | 276 | * Only the IP clock input is family dependant so it computed |
<> | 149:156823d33999 | 277 | * separately in spi_get_clock_freq |
<> | 149:156823d33999 | 278 | */ |
<> | 149:156823d33999 | 279 | extern int spi_get_clock_freq(spi_t *obj); |
<> | 149:156823d33999 | 280 | |
<> | 149:156823d33999 | 281 | static const uint16_t baudrate_prescaler_table[] = {SPI_BAUDRATEPRESCALER_2, |
<> | 149:156823d33999 | 282 | SPI_BAUDRATEPRESCALER_4, |
<> | 149:156823d33999 | 283 | SPI_BAUDRATEPRESCALER_8, |
<> | 149:156823d33999 | 284 | SPI_BAUDRATEPRESCALER_16, |
<> | 149:156823d33999 | 285 | SPI_BAUDRATEPRESCALER_32, |
<> | 149:156823d33999 | 286 | SPI_BAUDRATEPRESCALER_64, |
<> | 149:156823d33999 | 287 | SPI_BAUDRATEPRESCALER_128, |
<> | 149:156823d33999 | 288 | SPI_BAUDRATEPRESCALER_256}; |
<> | 149:156823d33999 | 289 | |
<> | 149:156823d33999 | 290 | void spi_frequency(spi_t *obj, int hz) { |
<> | 149:156823d33999 | 291 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 292 | int spi_hz = 0; |
<> | 149:156823d33999 | 293 | uint8_t prescaler_rank = 0; |
<> | 159:612c381a210f | 294 | uint8_t last_index = (sizeof(baudrate_prescaler_table)/sizeof(baudrate_prescaler_table[0])) - 1; |
<> | 149:156823d33999 | 295 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 296 | |
<> | 159:612c381a210f | 297 | /* Calculate the spi clock for prescaler_rank 0: SPI_BAUDRATEPRESCALER_2 */ |
<> | 159:612c381a210f | 298 | spi_hz = spi_get_clock_freq(obj) / 2; |
<> | 149:156823d33999 | 299 | |
<> | 149:156823d33999 | 300 | /* Define pre-scaler in order to get highest available frequency below requested frequency */ |
<> | 159:612c381a210f | 301 | while ((spi_hz > hz) && (prescaler_rank < last_index)) { |
<> | 149:156823d33999 | 302 | spi_hz = spi_hz / 2; |
<> | 149:156823d33999 | 303 | prescaler_rank++; |
<> | 149:156823d33999 | 304 | } |
<> | 149:156823d33999 | 305 | |
<> | 159:612c381a210f | 306 | /* Use the best fit pre-scaler */ |
<> | 159:612c381a210f | 307 | handle->Init.BaudRatePrescaler = baudrate_prescaler_table[prescaler_rank]; |
<> | 159:612c381a210f | 308 | |
<> | 159:612c381a210f | 309 | /* In case maximum pre-scaler still gives too high freq, raise an error */ |
<> | 159:612c381a210f | 310 | if (spi_hz > hz) { |
<> | 160:d5399cc887bb | 311 | DEBUG_PRINTF("WARNING: lowest SPI freq (%d) higher than requested (%d)\r\n", spi_hz, hz); |
<> | 149:156823d33999 | 312 | } |
<> | 149:156823d33999 | 313 | |
<> | 159:612c381a210f | 314 | DEBUG_PRINTF("spi_frequency, request:%d, select:%d\r\n", hz, spi_hz); |
<> | 159:612c381a210f | 315 | |
<> | 149:156823d33999 | 316 | init_spi(obj); |
<> | 149:156823d33999 | 317 | } |
<> | 149:156823d33999 | 318 | |
<> | 149:156823d33999 | 319 | static inline int ssp_readable(spi_t *obj) |
<> | 149:156823d33999 | 320 | { |
<> | 149:156823d33999 | 321 | int status; |
<> | 149:156823d33999 | 322 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 323 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 324 | |
<> | 149:156823d33999 | 325 | // Check if data is received |
<> | 149:156823d33999 | 326 | status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_RXNE) != RESET) ? 1 : 0); |
<> | 149:156823d33999 | 327 | return status; |
<> | 149:156823d33999 | 328 | } |
<> | 149:156823d33999 | 329 | |
<> | 149:156823d33999 | 330 | static inline int ssp_writeable(spi_t *obj) |
<> | 149:156823d33999 | 331 | { |
<> | 149:156823d33999 | 332 | int status; |
<> | 149:156823d33999 | 333 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 334 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 335 | |
<> | 149:156823d33999 | 336 | // Check if data is transmitted |
<> | 149:156823d33999 | 337 | status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_TXE) != RESET) ? 1 : 0); |
<> | 149:156823d33999 | 338 | return status; |
<> | 149:156823d33999 | 339 | } |
<> | 149:156823d33999 | 340 | |
<> | 149:156823d33999 | 341 | static inline int ssp_busy(spi_t *obj) |
<> | 149:156823d33999 | 342 | { |
<> | 149:156823d33999 | 343 | int status; |
<> | 149:156823d33999 | 344 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 345 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 346 | status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_BSY) != RESET) ? 1 : 0); |
<> | 149:156823d33999 | 347 | return status; |
<> | 149:156823d33999 | 348 | } |
<> | 149:156823d33999 | 349 | |
<> | 149:156823d33999 | 350 | int spi_master_write(spi_t *obj, int value) |
<> | 149:156823d33999 | 351 | { |
<> | 156:95d6b41a828b | 352 | uint16_t size, ret; |
<> | 156:95d6b41a828b | 353 | int Rx = 0; |
<> | 149:156823d33999 | 354 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 355 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 356 | |
<> | 149:156823d33999 | 357 | size = (handle->Init.DataSize == SPI_DATASIZE_16BIT) ? 2 : 1; |
<> | 149:156823d33999 | 358 | |
<> | 149:156823d33999 | 359 | /* Use 10ms timeout */ |
<> | 149:156823d33999 | 360 | ret = HAL_SPI_TransmitReceive(handle,(uint8_t*)&value,(uint8_t*)&Rx,size,10); |
<> | 149:156823d33999 | 361 | |
<> | 149:156823d33999 | 362 | if(ret == HAL_OK) { |
<> | 149:156823d33999 | 363 | return Rx; |
<> | 149:156823d33999 | 364 | } else { |
<> | 149:156823d33999 | 365 | DEBUG_PRINTF("SPI inst=0x%8X ERROR in write\r\n", (int)handle->Instance); |
<> | 149:156823d33999 | 366 | return -1; |
<> | 149:156823d33999 | 367 | } |
<> | 149:156823d33999 | 368 | } |
<> | 149:156823d33999 | 369 | |
<> | 149:156823d33999 | 370 | int spi_slave_receive(spi_t *obj) |
<> | 149:156823d33999 | 371 | { |
<> | 149:156823d33999 | 372 | return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0); |
<> | 149:156823d33999 | 373 | }; |
<> | 149:156823d33999 | 374 | |
<> | 149:156823d33999 | 375 | int spi_slave_read(spi_t *obj) |
<> | 149:156823d33999 | 376 | { |
<> | 149:156823d33999 | 377 | SPI_TypeDef *spi = SPI_INST(obj); |
<> | 149:156823d33999 | 378 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 379 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 380 | while (!ssp_readable(obj)); |
<> | 149:156823d33999 | 381 | if (handle->Init.DataSize == SPI_DATASIZE_8BIT) { |
<> | 149:156823d33999 | 382 | // Force 8-bit access to the data register |
<> | 149:156823d33999 | 383 | uint8_t *p_spi_dr = 0; |
<> | 149:156823d33999 | 384 | p_spi_dr = (uint8_t *) & (spi->DR); |
<> | 149:156823d33999 | 385 | return (int)(*p_spi_dr); |
<> | 149:156823d33999 | 386 | } else { |
<> | 149:156823d33999 | 387 | return (int)spi->DR; |
<> | 149:156823d33999 | 388 | } |
<> | 149:156823d33999 | 389 | } |
<> | 149:156823d33999 | 390 | |
<> | 149:156823d33999 | 391 | void spi_slave_write(spi_t *obj, int value) |
<> | 149:156823d33999 | 392 | { |
<> | 149:156823d33999 | 393 | SPI_TypeDef *spi = SPI_INST(obj); |
<> | 149:156823d33999 | 394 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 395 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 396 | while (!ssp_writeable(obj)); |
<> | 149:156823d33999 | 397 | if (handle->Init.DataSize == SPI_DATASIZE_8BIT) { |
<> | 149:156823d33999 | 398 | // Force 8-bit access to the data register |
<> | 149:156823d33999 | 399 | uint8_t *p_spi_dr = 0; |
<> | 149:156823d33999 | 400 | p_spi_dr = (uint8_t *) & (spi->DR); |
<> | 149:156823d33999 | 401 | *p_spi_dr = (uint8_t)value; |
<> | 149:156823d33999 | 402 | } else { // SPI_DATASIZE_16BIT |
<> | 149:156823d33999 | 403 | spi->DR = (uint16_t)value; |
<> | 149:156823d33999 | 404 | } |
<> | 149:156823d33999 | 405 | } |
<> | 149:156823d33999 | 406 | |
<> | 149:156823d33999 | 407 | int spi_busy(spi_t *obj) |
<> | 149:156823d33999 | 408 | { |
<> | 149:156823d33999 | 409 | return ssp_busy(obj); |
<> | 149:156823d33999 | 410 | } |
<> | 149:156823d33999 | 411 | |
<> | 149:156823d33999 | 412 | #ifdef DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 413 | typedef enum { |
<> | 149:156823d33999 | 414 | SPI_TRANSFER_TYPE_NONE = 0, |
<> | 149:156823d33999 | 415 | SPI_TRANSFER_TYPE_TX = 1, |
<> | 149:156823d33999 | 416 | SPI_TRANSFER_TYPE_RX = 2, |
<> | 149:156823d33999 | 417 | SPI_TRANSFER_TYPE_TXRX = 3, |
<> | 149:156823d33999 | 418 | } transfer_type_t; |
<> | 149:156823d33999 | 419 | |
<> | 149:156823d33999 | 420 | |
<> | 149:156823d33999 | 421 | /// @returns the number of bytes transferred, or `0` if nothing transferred |
<> | 149:156823d33999 | 422 | static int spi_master_start_asynch_transfer(spi_t *obj, transfer_type_t transfer_type, const void *tx, void *rx, size_t length) |
<> | 149:156823d33999 | 423 | { |
<> | 149:156823d33999 | 424 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 425 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 426 | bool is16bit = (handle->Init.DataSize == SPI_DATASIZE_16BIT); |
<> | 149:156823d33999 | 427 | // the HAL expects number of transfers instead of number of bytes |
<> | 149:156823d33999 | 428 | // so for 16 bit transfer width the count needs to be halved |
<> | 149:156823d33999 | 429 | size_t words; |
<> | 149:156823d33999 | 430 | |
<> | 149:156823d33999 | 431 | DEBUG_PRINTF("SPI inst=0x%8X Start: %u, %u\r\n", (int)handle->Instance, transfer_type, length); |
<> | 149:156823d33999 | 432 | |
<> | 149:156823d33999 | 433 | obj->spi.transfer_type = transfer_type; |
<> | 149:156823d33999 | 434 | |
<> | 149:156823d33999 | 435 | if (is16bit) { |
<> | 149:156823d33999 | 436 | words = length / 2; |
<> | 149:156823d33999 | 437 | } else { |
<> | 149:156823d33999 | 438 | words = length; |
<> | 149:156823d33999 | 439 | } |
<> | 149:156823d33999 | 440 | |
<> | 149:156823d33999 | 441 | // enable the interrupt |
<> | 149:156823d33999 | 442 | IRQn_Type irq_n = spiobj->spiIRQ; |
<> | 153:fa9ff456f731 | 443 | NVIC_DisableIRQ(irq_n); |
<> | 149:156823d33999 | 444 | NVIC_ClearPendingIRQ(irq_n); |
<> | 149:156823d33999 | 445 | NVIC_SetPriority(irq_n, 1); |
<> | 149:156823d33999 | 446 | NVIC_EnableIRQ(irq_n); |
<> | 149:156823d33999 | 447 | |
<> | 149:156823d33999 | 448 | // enable the right hal transfer |
<> | 149:156823d33999 | 449 | int rc = 0; |
<> | 149:156823d33999 | 450 | switch(transfer_type) { |
<> | 149:156823d33999 | 451 | case SPI_TRANSFER_TYPE_TXRX: |
<> | 149:156823d33999 | 452 | rc = HAL_SPI_TransmitReceive_IT(handle, (uint8_t*)tx, (uint8_t*)rx, words); |
<> | 149:156823d33999 | 453 | break; |
<> | 149:156823d33999 | 454 | case SPI_TRANSFER_TYPE_TX: |
<> | 149:156823d33999 | 455 | rc = HAL_SPI_Transmit_IT(handle, (uint8_t*)tx, words); |
<> | 149:156823d33999 | 456 | break; |
<> | 149:156823d33999 | 457 | case SPI_TRANSFER_TYPE_RX: |
<> | 149:156823d33999 | 458 | // the receive function also "transmits" the receive buffer so in order |
<> | 149:156823d33999 | 459 | // to guarantee that 0xff is on the line, we explicitly memset it here |
<> | 149:156823d33999 | 460 | memset(rx, SPI_FILL_WORD, length); |
<> | 149:156823d33999 | 461 | rc = HAL_SPI_Receive_IT(handle, (uint8_t*)rx, words); |
<> | 149:156823d33999 | 462 | break; |
<> | 149:156823d33999 | 463 | default: |
<> | 149:156823d33999 | 464 | length = 0; |
<> | 149:156823d33999 | 465 | } |
<> | 149:156823d33999 | 466 | |
<> | 149:156823d33999 | 467 | if (rc) { |
<> | 149:156823d33999 | 468 | DEBUG_PRINTF("SPI: RC=%u\n", rc); |
<> | 149:156823d33999 | 469 | length = 0; |
<> | 149:156823d33999 | 470 | } |
<> | 149:156823d33999 | 471 | |
<> | 149:156823d33999 | 472 | return length; |
<> | 149:156823d33999 | 473 | } |
<> | 149:156823d33999 | 474 | |
<> | 149:156823d33999 | 475 | // asynchronous API |
<> | 149:156823d33999 | 476 | void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint) |
<> | 149:156823d33999 | 477 | { |
<> | 149:156823d33999 | 478 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 479 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 480 | |
<> | 149:156823d33999 | 481 | // TODO: DMA usage is currently ignored |
<> | 149:156823d33999 | 482 | (void) hint; |
<> | 149:156823d33999 | 483 | |
<> | 149:156823d33999 | 484 | // check which use-case we have |
<> | 149:156823d33999 | 485 | bool use_tx = (tx != NULL && tx_length > 0); |
<> | 149:156823d33999 | 486 | bool use_rx = (rx != NULL && rx_length > 0); |
<> | 149:156823d33999 | 487 | bool is16bit = (handle->Init.DataSize == SPI_DATASIZE_16BIT); |
<> | 149:156823d33999 | 488 | |
<> | 149:156823d33999 | 489 | // don't do anything, if the buffers aren't valid |
<> | 149:156823d33999 | 490 | if (!use_tx && !use_rx) |
<> | 149:156823d33999 | 491 | return; |
<> | 149:156823d33999 | 492 | |
<> | 149:156823d33999 | 493 | // copy the buffers to the SPI object |
<> | 149:156823d33999 | 494 | obj->tx_buff.buffer = (void *) tx; |
<> | 149:156823d33999 | 495 | obj->tx_buff.length = tx_length; |
<> | 149:156823d33999 | 496 | obj->tx_buff.pos = 0; |
<> | 149:156823d33999 | 497 | obj->tx_buff.width = is16bit ? 16 : 8; |
<> | 149:156823d33999 | 498 | |
<> | 149:156823d33999 | 499 | obj->rx_buff.buffer = rx; |
<> | 149:156823d33999 | 500 | obj->rx_buff.length = rx_length; |
<> | 149:156823d33999 | 501 | obj->rx_buff.pos = 0; |
<> | 149:156823d33999 | 502 | obj->rx_buff.width = obj->tx_buff.width; |
<> | 149:156823d33999 | 503 | |
<> | 149:156823d33999 | 504 | obj->spi.event = event; |
<> | 149:156823d33999 | 505 | |
<> | 149:156823d33999 | 506 | DEBUG_PRINTF("SPI: Transfer: %u, %u\n", tx_length, rx_length); |
<> | 149:156823d33999 | 507 | |
<> | 149:156823d33999 | 508 | // register the thunking handler |
<> | 149:156823d33999 | 509 | IRQn_Type irq_n = spiobj->spiIRQ; |
<> | 149:156823d33999 | 510 | NVIC_SetVector(irq_n, (uint32_t)handler); |
<> | 149:156823d33999 | 511 | |
<> | 149:156823d33999 | 512 | // enable the right hal transfer |
<> | 149:156823d33999 | 513 | if (use_tx && use_rx) { |
<> | 149:156823d33999 | 514 | // we cannot manage different rx / tx sizes, let's use smaller one |
<> | 149:156823d33999 | 515 | size_t size = (tx_length < rx_length)? tx_length : rx_length; |
<> | 149:156823d33999 | 516 | if(tx_length != rx_length) { |
<> | 149:156823d33999 | 517 | DEBUG_PRINTF("SPI: Full duplex transfer only 1 size: %d\n", size); |
<> | 149:156823d33999 | 518 | obj->tx_buff.length = size; |
<> | 149:156823d33999 | 519 | obj->rx_buff.length = size; |
<> | 149:156823d33999 | 520 | } |
<> | 149:156823d33999 | 521 | spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_TXRX, tx, rx, size); |
<> | 149:156823d33999 | 522 | } else if (use_tx) { |
<> | 149:156823d33999 | 523 | spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_TX, tx, NULL, tx_length); |
<> | 149:156823d33999 | 524 | } else if (use_rx) { |
<> | 149:156823d33999 | 525 | spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_RX, NULL, rx, rx_length); |
<> | 149:156823d33999 | 526 | } |
<> | 149:156823d33999 | 527 | } |
<> | 149:156823d33999 | 528 | |
<> | 153:fa9ff456f731 | 529 | inline uint32_t spi_irq_handler_asynch(spi_t *obj) |
<> | 149:156823d33999 | 530 | { |
<> | 149:156823d33999 | 531 | int event = 0; |
<> | 149:156823d33999 | 532 | |
<> | 149:156823d33999 | 533 | // call the CubeF4 handler, this will update the handle |
<> | 153:fa9ff456f731 | 534 | HAL_SPI_IRQHandler(&obj->spi.handle); |
<> | 149:156823d33999 | 535 | |
<> | 153:fa9ff456f731 | 536 | if (obj->spi.handle.State == HAL_SPI_STATE_READY) { |
<> | 149:156823d33999 | 537 | // When HAL SPI is back to READY state, check if there was an error |
<> | 153:fa9ff456f731 | 538 | int error = obj->spi.handle.ErrorCode; |
<> | 149:156823d33999 | 539 | if(error != HAL_SPI_ERROR_NONE) { |
<> | 149:156823d33999 | 540 | // something went wrong and the transfer has definitely completed |
<> | 149:156823d33999 | 541 | event = SPI_EVENT_ERROR | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE; |
<> | 149:156823d33999 | 542 | |
<> | 149:156823d33999 | 543 | if (error & HAL_SPI_ERROR_OVR) { |
<> | 149:156823d33999 | 544 | // buffer overrun |
<> | 149:156823d33999 | 545 | event |= SPI_EVENT_RX_OVERFLOW; |
<> | 149:156823d33999 | 546 | } |
<> | 149:156823d33999 | 547 | } else { |
<> | 149:156823d33999 | 548 | // else we're done |
<> | 149:156823d33999 | 549 | event = SPI_EVENT_COMPLETE | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE; |
<> | 149:156823d33999 | 550 | } |
<> | 153:fa9ff456f731 | 551 | // enable the interrupt |
<> | 153:fa9ff456f731 | 552 | NVIC_DisableIRQ(obj->spi.spiIRQ); |
<> | 153:fa9ff456f731 | 553 | NVIC_ClearPendingIRQ(obj->spi.spiIRQ); |
<> | 149:156823d33999 | 554 | } |
<> | 149:156823d33999 | 555 | |
<> | 149:156823d33999 | 556 | |
<> | 149:156823d33999 | 557 | return (event & (obj->spi.event | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE)); |
<> | 149:156823d33999 | 558 | } |
<> | 149:156823d33999 | 559 | |
<> | 149:156823d33999 | 560 | uint8_t spi_active(spi_t *obj) |
<> | 149:156823d33999 | 561 | { |
<> | 149:156823d33999 | 562 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 563 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 564 | HAL_SPI_StateTypeDef state = HAL_SPI_GetState(handle); |
<> | 149:156823d33999 | 565 | |
<> | 149:156823d33999 | 566 | switch(state) { |
<> | 149:156823d33999 | 567 | case HAL_SPI_STATE_RESET: |
<> | 149:156823d33999 | 568 | case HAL_SPI_STATE_READY: |
<> | 149:156823d33999 | 569 | case HAL_SPI_STATE_ERROR: |
<> | 149:156823d33999 | 570 | return 0; |
<> | 149:156823d33999 | 571 | default: |
<> | 149:156823d33999 | 572 | return 1; |
<> | 149:156823d33999 | 573 | } |
<> | 149:156823d33999 | 574 | } |
<> | 149:156823d33999 | 575 | |
<> | 149:156823d33999 | 576 | void spi_abort_asynch(spi_t *obj) |
<> | 149:156823d33999 | 577 | { |
<> | 149:156823d33999 | 578 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 579 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 580 | |
<> | 149:156823d33999 | 581 | // disable interrupt |
<> | 149:156823d33999 | 582 | IRQn_Type irq_n = spiobj->spiIRQ; |
<> | 149:156823d33999 | 583 | NVIC_ClearPendingIRQ(irq_n); |
<> | 149:156823d33999 | 584 | NVIC_DisableIRQ(irq_n); |
<> | 149:156823d33999 | 585 | |
<> | 149:156823d33999 | 586 | // clean-up |
<> | 149:156823d33999 | 587 | __HAL_SPI_DISABLE(handle); |
<> | 149:156823d33999 | 588 | HAL_SPI_DeInit(handle); |
<> | 149:156823d33999 | 589 | HAL_SPI_Init(handle); |
<> | 149:156823d33999 | 590 | __HAL_SPI_ENABLE(handle); |
<> | 149:156823d33999 | 591 | } |
<> | 149:156823d33999 | 592 | |
<> | 149:156823d33999 | 593 | #endif //DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 594 | |
<> | 149:156823d33999 | 595 | #endif |