mbed
Fork of mbed-dev by
targets/TARGET_NUVOTON/TARGET_M451/spi_api.c@161:2cc1468da177, 2017-03-30 (annotated)
- Committer:
- <>
- Date:
- Thu Mar 30 13:45:57 2017 +0100
- Revision:
- 161:2cc1468da177
- Parent:
- 153:fa9ff456f731
- Child:
- 167:e84263d55307
This updates the lib to the mbed lib v139
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 149:156823d33999 | 1 | /* mbed Microcontroller Library |
<> | 149:156823d33999 | 2 | * Copyright (c) 2015-2016 Nuvoton |
<> | 149:156823d33999 | 3 | * |
<> | 149:156823d33999 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
<> | 149:156823d33999 | 5 | * you may not use this file except in compliance with the License. |
<> | 149:156823d33999 | 6 | * You may obtain a copy of the License at |
<> | 149:156823d33999 | 7 | * |
<> | 149:156823d33999 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
<> | 149:156823d33999 | 9 | * |
<> | 149:156823d33999 | 10 | * Unless required by applicable law or agreed to in writing, software |
<> | 149:156823d33999 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
<> | 149:156823d33999 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
<> | 149:156823d33999 | 13 | * See the License for the specific language governing permissions and |
<> | 149:156823d33999 | 14 | * limitations under the License. |
<> | 149:156823d33999 | 15 | */ |
<> | 149:156823d33999 | 16 | |
<> | 149:156823d33999 | 17 | #include "spi_api.h" |
<> | 149:156823d33999 | 18 | |
<> | 149:156823d33999 | 19 | #if DEVICE_SPI |
<> | 149:156823d33999 | 20 | |
<> | 149:156823d33999 | 21 | #include "cmsis.h" |
<> | 149:156823d33999 | 22 | #include "pinmap.h" |
<> | 149:156823d33999 | 23 | #include "PeripheralPins.h" |
<> | 149:156823d33999 | 24 | #include "nu_modutil.h" |
<> | 149:156823d33999 | 25 | #include "nu_miscutil.h" |
<> | 149:156823d33999 | 26 | #include "nu_bitutil.h" |
<> | 149:156823d33999 | 27 | |
<> | 149:156823d33999 | 28 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 29 | #include "dma_api.h" |
<> | 149:156823d33999 | 30 | #include "dma.h" |
<> | 149:156823d33999 | 31 | #endif |
<> | 149:156823d33999 | 32 | |
<> | 149:156823d33999 | 33 | #define NU_SPI_FRAME_MIN 8 |
<> | 149:156823d33999 | 34 | #define NU_SPI_FRAME_MAX 32 |
<> | 149:156823d33999 | 35 | #define NU_SPI_FIFO_DEPTH 8 |
<> | 149:156823d33999 | 36 | |
<> | 149:156823d33999 | 37 | struct nu_spi_var { |
<> | 149:156823d33999 | 38 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 39 | uint8_t pdma_perp_tx; |
<> | 149:156823d33999 | 40 | uint8_t pdma_perp_rx; |
<> | 149:156823d33999 | 41 | #endif |
<> | 149:156823d33999 | 42 | }; |
<> | 149:156823d33999 | 43 | |
<> | 149:156823d33999 | 44 | static struct nu_spi_var spi0_var = { |
<> | 149:156823d33999 | 45 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 46 | .pdma_perp_tx = PDMA_SPI0_TX, |
<> | 149:156823d33999 | 47 | .pdma_perp_rx = PDMA_SPI0_RX |
<> | 149:156823d33999 | 48 | #endif |
<> | 149:156823d33999 | 49 | }; |
<> | 149:156823d33999 | 50 | static struct nu_spi_var spi1_var = { |
<> | 149:156823d33999 | 51 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 52 | .pdma_perp_tx = PDMA_SPI1_TX, |
<> | 149:156823d33999 | 53 | .pdma_perp_rx = PDMA_SPI1_RX |
<> | 149:156823d33999 | 54 | #endif |
<> | 149:156823d33999 | 55 | }; |
<> | 149:156823d33999 | 56 | static struct nu_spi_var spi2_var = { |
<> | 149:156823d33999 | 57 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 58 | .pdma_perp_tx = PDMA_SPI2_TX, |
<> | 149:156823d33999 | 59 | .pdma_perp_rx = PDMA_SPI2_RX |
<> | 149:156823d33999 | 60 | #endif |
<> | 149:156823d33999 | 61 | }; |
<> | 149:156823d33999 | 62 | |
<> | 149:156823d33999 | 63 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 64 | static void spi_enable_vector_interrupt(spi_t *obj, uint32_t handler, uint8_t enable); |
<> | 149:156823d33999 | 65 | static void spi_master_enable_interrupt(spi_t *obj, uint8_t enable); |
<> | 149:156823d33999 | 66 | static uint32_t spi_master_write_asynch(spi_t *obj, uint32_t tx_limit); |
<> | 149:156823d33999 | 67 | static uint32_t spi_master_read_asynch(spi_t *obj); |
<> | 149:156823d33999 | 68 | static uint32_t spi_event_check(spi_t *obj); |
<> | 149:156823d33999 | 69 | static void spi_enable_event(spi_t *obj, uint32_t event, uint8_t enable); |
<> | 149:156823d33999 | 70 | static void spi_buffer_set(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length); |
<> | 149:156823d33999 | 71 | static void spi_check_dma_usage(DMAUsage *dma_usage, int *dma_ch_tx, int *dma_ch_rx); |
<> | 149:156823d33999 | 72 | static uint8_t spi_get_data_width(spi_t *obj); |
<> | 149:156823d33999 | 73 | static int spi_is_tx_complete(spi_t *obj); |
<> | 149:156823d33999 | 74 | static int spi_is_rx_complete(spi_t *obj); |
<> | 149:156823d33999 | 75 | static int spi_writeable(spi_t * obj); |
<> | 149:156823d33999 | 76 | static int spi_readable(spi_t * obj); |
<> | 149:156823d33999 | 77 | static void spi_dma_handler_tx(uint32_t id, uint32_t event_dma); |
<> | 149:156823d33999 | 78 | static void spi_dma_handler_rx(uint32_t id, uint32_t event_dma); |
<> | 149:156823d33999 | 79 | #endif |
<> | 149:156823d33999 | 80 | |
<> | 149:156823d33999 | 81 | static uint32_t spi_modinit_mask = 0; |
<> | 149:156823d33999 | 82 | |
<> | 149:156823d33999 | 83 | static const struct nu_modinit_s spi_modinit_tab[] = { |
<> | 149:156823d33999 | 84 | {SPI_0, SPI0_MODULE, CLK_CLKSEL2_SPI0SEL_PCLK0, MODULE_NoMsk, SPI0_RST, SPI0_IRQn, &spi0_var}, |
<> | 149:156823d33999 | 85 | {SPI_1, SPI1_MODULE, CLK_CLKSEL2_SPI1SEL_PCLK1, MODULE_NoMsk, SPI1_RST, SPI1_IRQn, &spi1_var}, |
<> | 149:156823d33999 | 86 | {SPI_2, SPI2_MODULE, CLK_CLKSEL2_SPI2SEL_PCLK0, MODULE_NoMsk, SPI2_RST, SPI2_IRQn, &spi2_var}, |
<> | 149:156823d33999 | 87 | |
<> | 149:156823d33999 | 88 | {NC, 0, 0, 0, 0, (IRQn_Type) 0, NULL} |
<> | 149:156823d33999 | 89 | }; |
<> | 149:156823d33999 | 90 | |
<> | 149:156823d33999 | 91 | void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) { |
<> | 149:156823d33999 | 92 | // Determine which SPI_x the pins are used for |
<> | 149:156823d33999 | 93 | uint32_t spi_mosi = pinmap_peripheral(mosi, PinMap_SPI_MOSI); |
<> | 149:156823d33999 | 94 | uint32_t spi_miso = pinmap_peripheral(miso, PinMap_SPI_MISO); |
<> | 149:156823d33999 | 95 | uint32_t spi_sclk = pinmap_peripheral(sclk, PinMap_SPI_SCLK); |
<> | 149:156823d33999 | 96 | uint32_t spi_ssel = pinmap_peripheral(ssel, PinMap_SPI_SSEL); |
<> | 149:156823d33999 | 97 | uint32_t spi_data = pinmap_merge(spi_mosi, spi_miso); |
<> | 149:156823d33999 | 98 | uint32_t spi_cntl = pinmap_merge(spi_sclk, spi_ssel); |
<> | 149:156823d33999 | 99 | obj->spi.spi = (SPIName) pinmap_merge(spi_data, spi_cntl); |
<> | 149:156823d33999 | 100 | MBED_ASSERT((int)obj->spi.spi != NC); |
<> | 149:156823d33999 | 101 | |
<> | 149:156823d33999 | 102 | const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab); |
<> | 149:156823d33999 | 103 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 104 | MBED_ASSERT(modinit->modname == obj->spi.spi); |
<> | 149:156823d33999 | 105 | |
<> | 149:156823d33999 | 106 | // Reset this module |
<> | 149:156823d33999 | 107 | SYS_ResetModule(modinit->rsetidx); |
<> | 149:156823d33999 | 108 | |
<> | 149:156823d33999 | 109 | // Select IP clock source |
<> | 149:156823d33999 | 110 | CLK_SetModuleClock(modinit->clkidx, modinit->clksrc, modinit->clkdiv); |
<> | 149:156823d33999 | 111 | // Enable IP clock |
<> | 149:156823d33999 | 112 | CLK_EnableModuleClock(modinit->clkidx); |
<> | 149:156823d33999 | 113 | |
<> | 149:156823d33999 | 114 | //SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 115 | |
<> | 149:156823d33999 | 116 | pinmap_pinout(mosi, PinMap_SPI_MOSI); |
<> | 149:156823d33999 | 117 | pinmap_pinout(miso, PinMap_SPI_MISO); |
<> | 149:156823d33999 | 118 | pinmap_pinout(sclk, PinMap_SPI_SCLK); |
<> | 149:156823d33999 | 119 | pinmap_pinout(ssel, PinMap_SPI_SSEL); |
<> | 149:156823d33999 | 120 | |
<> | 149:156823d33999 | 121 | obj->spi.pin_mosi = mosi; |
<> | 149:156823d33999 | 122 | obj->spi.pin_miso = miso; |
<> | 149:156823d33999 | 123 | obj->spi.pin_sclk = sclk; |
<> | 149:156823d33999 | 124 | obj->spi.pin_ssel = ssel; |
<> | 149:156823d33999 | 125 | |
<> | 149:156823d33999 | 126 | |
<> | 149:156823d33999 | 127 | // Configure the SPI data format and frequency |
<> | 149:156823d33999 | 128 | //spi_format(obj, 8, 0, SPI_MSB); // 8 bits, mode 0 |
<> | 149:156823d33999 | 129 | //spi_frequency(obj, 1000000); |
<> | 149:156823d33999 | 130 | |
<> | 149:156823d33999 | 131 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 132 | obj->spi.dma_usage = DMA_USAGE_NEVER; |
<> | 149:156823d33999 | 133 | obj->spi.event = 0; |
<> | 149:156823d33999 | 134 | obj->spi.dma_chn_id_tx = DMA_ERROR_OUT_OF_CHANNELS; |
<> | 149:156823d33999 | 135 | obj->spi.dma_chn_id_rx = DMA_ERROR_OUT_OF_CHANNELS; |
<> | 149:156823d33999 | 136 | #endif |
<> | 149:156823d33999 | 137 | |
<> | 149:156823d33999 | 138 | // Mark this module to be inited. |
<> | 149:156823d33999 | 139 | int i = modinit - spi_modinit_tab; |
<> | 149:156823d33999 | 140 | spi_modinit_mask |= 1 << i; |
<> | 149:156823d33999 | 141 | } |
<> | 149:156823d33999 | 142 | |
<> | 149:156823d33999 | 143 | void spi_free(spi_t *obj) |
<> | 149:156823d33999 | 144 | { |
<> | 149:156823d33999 | 145 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 146 | if (obj->spi.dma_chn_id_tx != DMA_ERROR_OUT_OF_CHANNELS) { |
<> | 149:156823d33999 | 147 | dma_channel_free(obj->spi.dma_chn_id_tx); |
<> | 149:156823d33999 | 148 | obj->spi.dma_chn_id_tx = DMA_ERROR_OUT_OF_CHANNELS; |
<> | 149:156823d33999 | 149 | } |
<> | 149:156823d33999 | 150 | if (obj->spi.dma_chn_id_rx != DMA_ERROR_OUT_OF_CHANNELS) { |
<> | 149:156823d33999 | 151 | dma_channel_free(obj->spi.dma_chn_id_rx); |
<> | 149:156823d33999 | 152 | obj->spi.dma_chn_id_rx = DMA_ERROR_OUT_OF_CHANNELS; |
<> | 149:156823d33999 | 153 | } |
<> | 149:156823d33999 | 154 | #endif |
<> | 149:156823d33999 | 155 | |
<> | 149:156823d33999 | 156 | SPI_Close((SPI_T *) NU_MODBASE(obj->spi.spi)); |
<> | 149:156823d33999 | 157 | |
<> | 149:156823d33999 | 158 | const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab); |
<> | 149:156823d33999 | 159 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 160 | MBED_ASSERT(modinit->modname == obj->spi.spi); |
<> | 149:156823d33999 | 161 | |
<> | 149:156823d33999 | 162 | SPI_DisableInt(((SPI_T *) NU_MODBASE(obj->spi.spi)), (SPI_FIFO_RXOV_INT_MASK | SPI_FIFO_RXTH_INT_MASK | SPI_FIFO_TXTH_INT_MASK)); |
<> | 149:156823d33999 | 163 | NVIC_DisableIRQ(modinit->irq_n); |
<> | 149:156823d33999 | 164 | |
<> | 149:156823d33999 | 165 | // Disable IP clock |
<> | 149:156823d33999 | 166 | CLK_DisableModuleClock(modinit->clkidx); |
<> | 149:156823d33999 | 167 | |
<> | 149:156823d33999 | 168 | //((struct nu_spi_var *) modinit->var)->obj = NULL; |
<> | 149:156823d33999 | 169 | |
<> | 149:156823d33999 | 170 | // Mark this module to be deinited. |
<> | 149:156823d33999 | 171 | int i = modinit - spi_modinit_tab; |
<> | 149:156823d33999 | 172 | spi_modinit_mask &= ~(1 << i); |
<> | 149:156823d33999 | 173 | } |
<> | 149:156823d33999 | 174 | void spi_format(spi_t *obj, int bits, int mode, int slave) |
<> | 149:156823d33999 | 175 | { |
<> | 149:156823d33999 | 176 | MBED_ASSERT(bits >= NU_SPI_FRAME_MIN && bits <= NU_SPI_FRAME_MAX); |
<> | 149:156823d33999 | 177 | |
<> | 149:156823d33999 | 178 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 179 | |
<> | 149:156823d33999 | 180 | // NOTE 1: All configurations should be ready before enabling SPI peripheral. |
<> | 149:156823d33999 | 181 | // NOTE 2: Re-configuration is allowed only as SPI peripheral is idle. |
<> | 149:156823d33999 | 182 | while (SPI_IS_BUSY(spi_base)); |
<> | 149:156823d33999 | 183 | SPI_DISABLE(spi_base); |
<> | 149:156823d33999 | 184 | |
<> | 149:156823d33999 | 185 | SPI_Open(spi_base, |
<> | 149:156823d33999 | 186 | slave ? SPI_SLAVE : SPI_MASTER, |
<> | 149:156823d33999 | 187 | (mode == 0) ? SPI_MODE_0 : (mode == 1) ? SPI_MODE_1 : (mode == 2) ? SPI_MODE_2 : SPI_MODE_3, |
<> | 149:156823d33999 | 188 | bits, |
<> | 149:156823d33999 | 189 | SPI_GetBusClock(spi_base)); |
<> | 149:156823d33999 | 190 | // NOTE: Hardcode to be MSB first. |
<> | 149:156823d33999 | 191 | SPI_SET_MSB_FIRST(spi_base); |
<> | 149:156823d33999 | 192 | |
<> | 149:156823d33999 | 193 | if (! slave) { |
<> | 149:156823d33999 | 194 | // Master |
<> | 149:156823d33999 | 195 | if (obj->spi.pin_ssel != NC) { |
<> | 149:156823d33999 | 196 | // Configure SS as low active. |
<> | 149:156823d33999 | 197 | SPI_EnableAutoSS(spi_base, SPI_SS, SPI_SS_ACTIVE_LOW); |
<> | 149:156823d33999 | 198 | } |
<> | 149:156823d33999 | 199 | else { |
<> | 149:156823d33999 | 200 | SPI_DisableAutoSS(spi_base); |
<> | 149:156823d33999 | 201 | } |
<> | 149:156823d33999 | 202 | } |
<> | 149:156823d33999 | 203 | else { |
<> | 149:156823d33999 | 204 | // Slave |
<> | 149:156823d33999 | 205 | // Configure SS as low active. |
<> | 149:156823d33999 | 206 | spi_base->SSCTL &= ~SPI_SSCTL_SSACTPOL_Msk; |
<> | 149:156823d33999 | 207 | } |
<> | 149:156823d33999 | 208 | |
<> | 149:156823d33999 | 209 | // NOTE: M451's SPI_Open() will enable SPI transfer (SPI_CTL_SPIEN_Msk). This will violate judgement of spi_active(). Disable it. |
<> | 149:156823d33999 | 210 | SPI_DISABLE(spi_base); |
<> | 149:156823d33999 | 211 | } |
<> | 149:156823d33999 | 212 | |
<> | 149:156823d33999 | 213 | void spi_frequency(spi_t *obj, int hz) |
<> | 149:156823d33999 | 214 | { |
<> | 149:156823d33999 | 215 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 216 | |
<> | 149:156823d33999 | 217 | while (SPI_IS_BUSY(spi_base)); |
<> | 149:156823d33999 | 218 | SPI_DISABLE(spi_base); |
<> | 149:156823d33999 | 219 | |
<> | 149:156823d33999 | 220 | SPI_SetBusClock((SPI_T *) NU_MODBASE(obj->spi.spi), hz); |
<> | 149:156823d33999 | 221 | } |
<> | 149:156823d33999 | 222 | |
<> | 149:156823d33999 | 223 | |
<> | 149:156823d33999 | 224 | int spi_master_write(spi_t *obj, int value) |
<> | 149:156823d33999 | 225 | { |
<> | 149:156823d33999 | 226 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 227 | |
<> | 149:156823d33999 | 228 | // NOTE: Data in receive FIFO can be read out via ICE. |
<> | 149:156823d33999 | 229 | SPI_ENABLE(spi_base); |
<> | 149:156823d33999 | 230 | |
<> | 149:156823d33999 | 231 | // Wait for tx buffer empty |
<> | 149:156823d33999 | 232 | while(! spi_writeable(obj)); |
<> | 149:156823d33999 | 233 | SPI_WRITE_TX(spi_base, value); |
<> | 149:156823d33999 | 234 | |
<> | 149:156823d33999 | 235 | // Wait for rx buffer full |
<> | 149:156823d33999 | 236 | while (! spi_readable(obj)); |
<> | 149:156823d33999 | 237 | int value2 = SPI_READ_RX(spi_base); |
<> | 149:156823d33999 | 238 | |
<> | 149:156823d33999 | 239 | SPI_DISABLE(spi_base); |
<> | 149:156823d33999 | 240 | |
<> | 149:156823d33999 | 241 | return value2; |
<> | 149:156823d33999 | 242 | } |
<> | 149:156823d33999 | 243 | |
<> | 149:156823d33999 | 244 | #if DEVICE_SPISLAVE |
<> | 149:156823d33999 | 245 | int spi_slave_receive(spi_t *obj) |
<> | 149:156823d33999 | 246 | { |
<> | 149:156823d33999 | 247 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 248 | |
<> | 149:156823d33999 | 249 | SPI_ENABLE(spi_base); |
<> | 149:156823d33999 | 250 | |
<> | 149:156823d33999 | 251 | return spi_readable(obj); |
<> | 149:156823d33999 | 252 | }; |
<> | 149:156823d33999 | 253 | |
<> | 149:156823d33999 | 254 | int spi_slave_read(spi_t *obj) |
<> | 149:156823d33999 | 255 | { |
<> | 149:156823d33999 | 256 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 257 | |
<> | 149:156823d33999 | 258 | SPI_ENABLE(spi_base); |
<> | 149:156823d33999 | 259 | |
<> | 149:156823d33999 | 260 | // Wait for rx buffer full |
<> | 149:156823d33999 | 261 | while (! spi_readable(obj)); |
<> | 149:156823d33999 | 262 | int value = SPI_READ_RX(spi_base); |
<> | 149:156823d33999 | 263 | return value; |
<> | 149:156823d33999 | 264 | } |
<> | 149:156823d33999 | 265 | |
<> | 149:156823d33999 | 266 | void spi_slave_write(spi_t *obj, int value) |
<> | 149:156823d33999 | 267 | { |
<> | 149:156823d33999 | 268 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 269 | |
<> | 149:156823d33999 | 270 | SPI_ENABLE(spi_base); |
<> | 149:156823d33999 | 271 | |
<> | 149:156823d33999 | 272 | // Wait for tx buffer empty |
<> | 149:156823d33999 | 273 | while(! spi_writeable(obj)); |
<> | 149:156823d33999 | 274 | SPI_WRITE_TX(spi_base, value); |
<> | 149:156823d33999 | 275 | } |
<> | 149:156823d33999 | 276 | #endif |
<> | 149:156823d33999 | 277 | |
<> | 149:156823d33999 | 278 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 279 | void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint) |
<> | 149:156823d33999 | 280 | { |
<> | 149:156823d33999 | 281 | //MBED_ASSERT(bits >= NU_SPI_FRAME_MIN && bits <= NU_SPI_FRAME_MAX); |
<> | 149:156823d33999 | 282 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 283 | SPI_SET_DATA_WIDTH(spi_base, bit_width); |
<> | 149:156823d33999 | 284 | |
<> | 149:156823d33999 | 285 | obj->spi.dma_usage = hint; |
<> | 149:156823d33999 | 286 | spi_check_dma_usage(&obj->spi.dma_usage, &obj->spi.dma_chn_id_tx, &obj->spi.dma_chn_id_rx); |
<> | 149:156823d33999 | 287 | uint32_t data_width = spi_get_data_width(obj); |
<> | 149:156823d33999 | 288 | // Conditions to go DMA way: |
<> | 149:156823d33999 | 289 | // (1) No DMA support for non-8 multiple data width. |
<> | 149:156823d33999 | 290 | // (2) tx length >= rx length. Otherwise, as tx DMA is done, no bus activity for remaining rx. |
<> | 149:156823d33999 | 291 | if ((data_width % 8) || |
<> | 149:156823d33999 | 292 | (tx_length < rx_length)) { |
<> | 149:156823d33999 | 293 | obj->spi.dma_usage = DMA_USAGE_NEVER; |
<> | 149:156823d33999 | 294 | dma_channel_free(obj->spi.dma_chn_id_tx); |
<> | 149:156823d33999 | 295 | obj->spi.dma_chn_id_tx = DMA_ERROR_OUT_OF_CHANNELS; |
<> | 149:156823d33999 | 296 | dma_channel_free(obj->spi.dma_chn_id_rx); |
<> | 149:156823d33999 | 297 | obj->spi.dma_chn_id_rx = DMA_ERROR_OUT_OF_CHANNELS; |
<> | 149:156823d33999 | 298 | } |
<> | 149:156823d33999 | 299 | |
<> | 149:156823d33999 | 300 | // SPI IRQ is necessary for both interrupt way and DMA way |
<> | 149:156823d33999 | 301 | spi_enable_event(obj, event, 1); |
<> | 149:156823d33999 | 302 | spi_buffer_set(obj, tx, tx_length, rx, rx_length); |
<> | 149:156823d33999 | 303 | |
<> | 149:156823d33999 | 304 | SPI_ENABLE(spi_base); |
<> | 149:156823d33999 | 305 | |
<> | 149:156823d33999 | 306 | if (obj->spi.dma_usage == DMA_USAGE_NEVER) { |
<> | 149:156823d33999 | 307 | // Interrupt way |
<> | 149:156823d33999 | 308 | spi_master_write_asynch(obj, NU_SPI_FIFO_DEPTH / 2); |
<> | 149:156823d33999 | 309 | spi_enable_vector_interrupt(obj, handler, 1); |
<> | 149:156823d33999 | 310 | spi_master_enable_interrupt(obj, 1); |
<> | 149:156823d33999 | 311 | } else { |
<> | 149:156823d33999 | 312 | // DMA way |
<> | 149:156823d33999 | 313 | const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab); |
<> | 149:156823d33999 | 314 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 315 | MBED_ASSERT(modinit->modname == obj->spi.spi); |
<> | 149:156823d33999 | 316 | |
<> | 161:2cc1468da177 | 317 | PDMA_T *pdma_base = dma_modbase(); |
<> | 161:2cc1468da177 | 318 | |
<> | 149:156823d33999 | 319 | // Configure tx DMA |
<> | 161:2cc1468da177 | 320 | pdma_base->CHCTL |= 1 << obj->spi.dma_chn_id_tx; // Enable this DMA channel |
<> | 149:156823d33999 | 321 | PDMA_SetTransferMode(obj->spi.dma_chn_id_tx, |
<> | 149:156823d33999 | 322 | ((struct nu_spi_var *) modinit->var)->pdma_perp_tx, // Peripheral connected to this PDMA |
<> | 149:156823d33999 | 323 | 0, // Scatter-gather disabled |
<> | 149:156823d33999 | 324 | 0); // Scatter-gather descriptor address |
<> | 149:156823d33999 | 325 | PDMA_SetTransferCnt(obj->spi.dma_chn_id_tx, |
<> | 149:156823d33999 | 326 | (data_width == 8) ? PDMA_WIDTH_8 : (data_width == 16) ? PDMA_WIDTH_16 : PDMA_WIDTH_32, |
<> | 149:156823d33999 | 327 | tx_length); |
<> | 149:156823d33999 | 328 | PDMA_SetTransferAddr(obj->spi.dma_chn_id_tx, |
<> | 149:156823d33999 | 329 | (uint32_t) tx, // NOTE: |
<> | 149:156823d33999 | 330 | // NUC472: End of source address |
<> | 149:156823d33999 | 331 | // M451: Start of source address |
<> | 149:156823d33999 | 332 | PDMA_SAR_INC, // Source address incremental |
<> | 149:156823d33999 | 333 | (uint32_t) &spi_base->TX, // Destination address |
<> | 149:156823d33999 | 334 | PDMA_DAR_FIX); // Destination address fixed |
<> | 149:156823d33999 | 335 | PDMA_SetBurstType(obj->spi.dma_chn_id_tx, |
<> | 149:156823d33999 | 336 | PDMA_REQ_SINGLE, // Single mode |
<> | 149:156823d33999 | 337 | 0); // Burst size |
<> | 149:156823d33999 | 338 | PDMA_EnableInt(obj->spi.dma_chn_id_tx, |
<> | 149:156823d33999 | 339 | PDMA_INT_TRANS_DONE); // Interrupt type |
<> | 149:156823d33999 | 340 | // Register DMA event handler |
<> | 149:156823d33999 | 341 | dma_set_handler(obj->spi.dma_chn_id_tx, (uint32_t) spi_dma_handler_tx, (uint32_t) obj, DMA_EVENT_ALL); |
<> | 149:156823d33999 | 342 | |
<> | 149:156823d33999 | 343 | // Configure rx DMA |
<> | 161:2cc1468da177 | 344 | pdma_base->CHCTL |= 1 << obj->spi.dma_chn_id_rx; // Enable this DMA channel |
<> | 149:156823d33999 | 345 | PDMA_SetTransferMode(obj->spi.dma_chn_id_rx, |
<> | 149:156823d33999 | 346 | ((struct nu_spi_var *) modinit->var)->pdma_perp_rx, // Peripheral connected to this PDMA |
<> | 149:156823d33999 | 347 | 0, // Scatter-gather disabled |
<> | 149:156823d33999 | 348 | 0); // Scatter-gather descriptor address |
<> | 149:156823d33999 | 349 | PDMA_SetTransferCnt(obj->spi.dma_chn_id_rx, |
<> | 149:156823d33999 | 350 | (data_width == 8) ? PDMA_WIDTH_8 : (data_width == 16) ? PDMA_WIDTH_16 : PDMA_WIDTH_32, |
<> | 149:156823d33999 | 351 | rx_length); |
<> | 149:156823d33999 | 352 | PDMA_SetTransferAddr(obj->spi.dma_chn_id_rx, |
<> | 149:156823d33999 | 353 | (uint32_t) &spi_base->RX, // Source address |
<> | 149:156823d33999 | 354 | PDMA_SAR_FIX, // Source address fixed |
<> | 149:156823d33999 | 355 | (uint32_t) rx, // NOTE: |
<> | 149:156823d33999 | 356 | // NUC472: End of destination address |
<> | 149:156823d33999 | 357 | // M451: Start of destination address |
<> | 149:156823d33999 | 358 | PDMA_DAR_INC); // Destination address incremental |
<> | 149:156823d33999 | 359 | PDMA_SetBurstType(obj->spi.dma_chn_id_rx, |
<> | 149:156823d33999 | 360 | PDMA_REQ_SINGLE, // Single mode |
<> | 149:156823d33999 | 361 | 0); // Burst size |
<> | 149:156823d33999 | 362 | PDMA_EnableInt(obj->spi.dma_chn_id_rx, |
<> | 149:156823d33999 | 363 | PDMA_INT_TRANS_DONE); // Interrupt type |
<> | 149:156823d33999 | 364 | // Register DMA event handler |
<> | 149:156823d33999 | 365 | dma_set_handler(obj->spi.dma_chn_id_rx, (uint32_t) spi_dma_handler_rx, (uint32_t) obj, DMA_EVENT_ALL); |
<> | 149:156823d33999 | 366 | |
<> | 149:156823d33999 | 367 | // Start tx/rx DMA transfer |
<> | 149:156823d33999 | 368 | spi_enable_vector_interrupt(obj, handler, 1); |
<> | 149:156823d33999 | 369 | // NOTE: It is safer to start rx DMA first and then tx DMA. Otherwise, receive FIFO is subject to overflow by tx DMA. |
<> | 149:156823d33999 | 370 | SPI_TRIGGER_RX_PDMA(((SPI_T *) NU_MODBASE(obj->spi.spi))); |
<> | 149:156823d33999 | 371 | SPI_TRIGGER_TX_PDMA(((SPI_T *) NU_MODBASE(obj->spi.spi))); |
<> | 149:156823d33999 | 372 | spi_master_enable_interrupt(obj, 1); |
<> | 149:156823d33999 | 373 | } |
<> | 149:156823d33999 | 374 | } |
<> | 149:156823d33999 | 375 | |
<> | 149:156823d33999 | 376 | /** |
<> | 149:156823d33999 | 377 | * Abort an SPI transfer |
<> | 149:156823d33999 | 378 | * This is a helper function for event handling. When any of the events listed occurs, the HAL will abort any ongoing |
<> | 149:156823d33999 | 379 | * transfers |
<> | 149:156823d33999 | 380 | * @param[in] obj The SPI peripheral to stop |
<> | 149:156823d33999 | 381 | */ |
<> | 149:156823d33999 | 382 | void spi_abort_asynch(spi_t *obj) |
<> | 149:156823d33999 | 383 | { |
<> | 149:156823d33999 | 384 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 161:2cc1468da177 | 385 | PDMA_T *pdma_base = dma_modbase(); |
<> | 149:156823d33999 | 386 | |
<> | 149:156823d33999 | 387 | if (obj->spi.dma_usage != DMA_USAGE_NEVER) { |
<> | 149:156823d33999 | 388 | // Receive FIFO Overrun in case of tx length > rx length on DMA way |
<> | 149:156823d33999 | 389 | if (spi_base->STATUS & SPI_STATUS_RXOVIF_Msk) { |
<> | 149:156823d33999 | 390 | spi_base->STATUS = SPI_STATUS_RXOVIF_Msk; |
<> | 149:156823d33999 | 391 | } |
<> | 149:156823d33999 | 392 | |
<> | 149:156823d33999 | 393 | if (obj->spi.dma_chn_id_tx != DMA_ERROR_OUT_OF_CHANNELS) { |
<> | 161:2cc1468da177 | 394 | PDMA_DisableInt(obj->spi.dma_chn_id_tx, PDMA_INT_TRANS_DONE); |
<> | 149:156823d33999 | 395 | // FIXME: On NUC472, next PDMA transfer will fail with PDMA_STOP() called. Cause is unknown. |
<> | 149:156823d33999 | 396 | //PDMA_STOP(obj->spi.dma_chn_id_tx); |
<> | 161:2cc1468da177 | 397 | pdma_base->CHCTL &= ~(1 << obj->spi.dma_chn_id_tx); |
<> | 149:156823d33999 | 398 | } |
<> | 149:156823d33999 | 399 | SPI_DISABLE_TX_PDMA(((SPI_T *) NU_MODBASE(obj->spi.spi))); |
<> | 149:156823d33999 | 400 | |
<> | 149:156823d33999 | 401 | if (obj->spi.dma_chn_id_rx != DMA_ERROR_OUT_OF_CHANNELS) { |
<> | 161:2cc1468da177 | 402 | PDMA_DisableInt(obj->spi.dma_chn_id_rx, PDMA_INT_TRANS_DONE); |
<> | 149:156823d33999 | 403 | // FIXME: On NUC472, next PDMA transfer will fail with PDMA_STOP() called. Cause is unknown. |
<> | 149:156823d33999 | 404 | //PDMA_STOP(obj->spi.dma_chn_id_rx); |
<> | 161:2cc1468da177 | 405 | pdma_base->CHCTL &= ~(1 << obj->spi.dma_chn_id_rx); |
<> | 149:156823d33999 | 406 | } |
<> | 149:156823d33999 | 407 | SPI_DISABLE_RX_PDMA(((SPI_T *) NU_MODBASE(obj->spi.spi))); |
<> | 149:156823d33999 | 408 | } |
<> | 149:156823d33999 | 409 | |
<> | 149:156823d33999 | 410 | // Necessary for both interrupt way and DMA way |
<> | 149:156823d33999 | 411 | spi_enable_vector_interrupt(obj, 0, 0); |
<> | 149:156823d33999 | 412 | spi_master_enable_interrupt(obj, 0); |
<> | 149:156823d33999 | 413 | |
<> | 149:156823d33999 | 414 | // FIXME: SPI H/W may get out of state without the busy check. |
<> | 149:156823d33999 | 415 | while (SPI_IS_BUSY(spi_base)); |
<> | 149:156823d33999 | 416 | SPI_DISABLE(spi_base); |
<> | 149:156823d33999 | 417 | |
<> | 149:156823d33999 | 418 | SPI_ClearRxFIFO(spi_base); |
<> | 149:156823d33999 | 419 | SPI_ClearTxFIFO(spi_base); |
<> | 149:156823d33999 | 420 | } |
<> | 149:156823d33999 | 421 | |
<> | 149:156823d33999 | 422 | /** |
<> | 149:156823d33999 | 423 | * Handle the SPI interrupt |
<> | 149:156823d33999 | 424 | * Read frames until the RX FIFO is empty. Write at most as many frames as were read. This way, |
<> | 149:156823d33999 | 425 | * it is unlikely that the RX FIFO will overflow. |
<> | 149:156823d33999 | 426 | * @param[in] obj The SPI peripheral that generated the interrupt |
<> | 149:156823d33999 | 427 | * @return |
<> | 149:156823d33999 | 428 | */ |
<> | 149:156823d33999 | 429 | uint32_t spi_irq_handler_asynch(spi_t *obj) |
<> | 149:156823d33999 | 430 | { |
<> | 149:156823d33999 | 431 | // Check for SPI events |
<> | 149:156823d33999 | 432 | uint32_t event = spi_event_check(obj); |
<> | 149:156823d33999 | 433 | if (event) { |
<> | 149:156823d33999 | 434 | spi_abort_asynch(obj); |
<> | 149:156823d33999 | 435 | } |
<> | 149:156823d33999 | 436 | |
<> | 149:156823d33999 | 437 | return (obj->spi.event & event) | ((event & SPI_EVENT_COMPLETE) ? SPI_EVENT_INTERNAL_TRANSFER_COMPLETE : 0); |
<> | 149:156823d33999 | 438 | } |
<> | 149:156823d33999 | 439 | |
<> | 149:156823d33999 | 440 | uint8_t spi_active(spi_t *obj) |
<> | 149:156823d33999 | 441 | { |
<> | 149:156823d33999 | 442 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 443 | // FIXME |
<> | 149:156823d33999 | 444 | /* |
<> | 149:156823d33999 | 445 | if ((obj->rx_buff.buffer && obj->rx_buff.pos < obj->rx_buff.length) |
<> | 149:156823d33999 | 446 | || (obj->tx_buff.buffer && obj->tx_buff.pos < obj->tx_buff.length) ){ |
<> | 149:156823d33999 | 447 | return 1; |
<> | 149:156823d33999 | 448 | } else { |
<> | 149:156823d33999 | 449 | // interrupts are disabled, all transaction have been completed |
<> | 149:156823d33999 | 450 | // TODO: checking rx fifo, it reports data eventhough RFDF is not set |
<> | 149:156823d33999 | 451 | return DSPI_HAL_GetIntMode(obj->spi.address, kDspiRxFifoDrainRequest); |
<> | 149:156823d33999 | 452 | }*/ |
<> | 149:156823d33999 | 453 | |
<> | 149:156823d33999 | 454 | //return SPI_IS_BUSY(spi_base); |
<> | 149:156823d33999 | 455 | return (spi_base->CTL & SPI_CTL_SPIEN_Msk); |
<> | 149:156823d33999 | 456 | } |
<> | 149:156823d33999 | 457 | |
<> | 149:156823d33999 | 458 | int spi_allow_powerdown(void) |
<> | 149:156823d33999 | 459 | { |
<> | 149:156823d33999 | 460 | uint32_t modinit_mask = spi_modinit_mask; |
<> | 149:156823d33999 | 461 | while (modinit_mask) { |
<> | 149:156823d33999 | 462 | int spi_idx = nu_ctz(modinit_mask); |
<> | 149:156823d33999 | 463 | const struct nu_modinit_s *modinit = spi_modinit_tab + spi_idx; |
<> | 149:156823d33999 | 464 | if (modinit->modname != NC) { |
<> | 149:156823d33999 | 465 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(modinit->modname); |
<> | 149:156823d33999 | 466 | // Disallow entering power-down mode if SPI transfer is enabled. |
<> | 149:156823d33999 | 467 | if (spi_base->CTL & SPI_CTL_SPIEN_Msk) { |
<> | 149:156823d33999 | 468 | return 0; |
<> | 149:156823d33999 | 469 | } |
<> | 149:156823d33999 | 470 | } |
<> | 149:156823d33999 | 471 | modinit_mask &= ~(1 << spi_idx); |
<> | 149:156823d33999 | 472 | } |
<> | 149:156823d33999 | 473 | |
<> | 149:156823d33999 | 474 | return 1; |
<> | 149:156823d33999 | 475 | } |
<> | 149:156823d33999 | 476 | |
<> | 149:156823d33999 | 477 | static int spi_writeable(spi_t * obj) |
<> | 149:156823d33999 | 478 | { |
<> | 149:156823d33999 | 479 | // Receive FIFO must not be full to avoid receive FIFO overflow on next transmit/receive |
<> | 149:156823d33999 | 480 | //return (! SPI_GET_TX_FIFO_FULL_FLAG(((SPI_T *) NU_MODBASE(obj->spi.spi)))) && (SPI_GET_RX_FIFO_COUNT(((SPI_T *) NU_MODBASE(obj->spi.spi))) < NU_SPI_FIFO_DEPTH); |
<> | 149:156823d33999 | 481 | return (! SPI_GET_TX_FIFO_FULL_FLAG(((SPI_T *) NU_MODBASE(obj->spi.spi)))); |
<> | 149:156823d33999 | 482 | } |
<> | 149:156823d33999 | 483 | |
<> | 149:156823d33999 | 484 | static int spi_readable(spi_t * obj) |
<> | 149:156823d33999 | 485 | { |
<> | 149:156823d33999 | 486 | return ! SPI_GET_RX_FIFO_EMPTY_FLAG(((SPI_T *) NU_MODBASE(obj->spi.spi))); |
<> | 149:156823d33999 | 487 | } |
<> | 149:156823d33999 | 488 | |
<> | 149:156823d33999 | 489 | static void spi_enable_event(spi_t *obj, uint32_t event, uint8_t enable) |
<> | 149:156823d33999 | 490 | { |
<> | 149:156823d33999 | 491 | obj->spi.event &= ~SPI_EVENT_ALL; |
<> | 149:156823d33999 | 492 | obj->spi.event |= (event & SPI_EVENT_ALL); |
<> | 149:156823d33999 | 493 | if (event & SPI_EVENT_RX_OVERFLOW) { |
<> | 149:156823d33999 | 494 | SPI_EnableInt((SPI_T *) NU_MODBASE(obj->spi.spi), SPI_FIFO_RXOV_INT_MASK); |
<> | 149:156823d33999 | 495 | } |
<> | 149:156823d33999 | 496 | } |
<> | 149:156823d33999 | 497 | |
<> | 149:156823d33999 | 498 | static void spi_enable_vector_interrupt(spi_t *obj, uint32_t handler, uint8_t enable) |
<> | 149:156823d33999 | 499 | { |
<> | 149:156823d33999 | 500 | const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab); |
<> | 149:156823d33999 | 501 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 502 | MBED_ASSERT(modinit->modname == obj->spi.spi); |
<> | 149:156823d33999 | 503 | |
<> | 149:156823d33999 | 504 | if (enable) { |
<> | 149:156823d33999 | 505 | NVIC_SetVector(modinit->irq_n, handler); |
<> | 149:156823d33999 | 506 | NVIC_EnableIRQ(modinit->irq_n); |
<> | 149:156823d33999 | 507 | } |
<> | 149:156823d33999 | 508 | else { |
<> | 149:156823d33999 | 509 | //NVIC_SetVector(modinit->irq_n, handler); |
<> | 149:156823d33999 | 510 | NVIC_DisableIRQ(modinit->irq_n); |
<> | 149:156823d33999 | 511 | } |
<> | 149:156823d33999 | 512 | } |
<> | 149:156823d33999 | 513 | |
<> | 149:156823d33999 | 514 | static void spi_master_enable_interrupt(spi_t *obj, uint8_t enable) |
<> | 149:156823d33999 | 515 | { |
<> | 149:156823d33999 | 516 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 517 | |
<> | 149:156823d33999 | 518 | if (enable) { |
<> | 149:156823d33999 | 519 | // For SPI0, it could be 0 ~ 7. For SPI1 and SPI2, it could be 0 ~ 3. |
<> | 149:156823d33999 | 520 | if (spi_base == (SPI_T *) SPI0_BASE) { |
<> | 149:156823d33999 | 521 | SPI_SetFIFO(spi_base, 4, 4); |
<> | 149:156823d33999 | 522 | } |
<> | 149:156823d33999 | 523 | else { |
<> | 149:156823d33999 | 524 | SPI_SetFIFO(spi_base, 2, 2); |
<> | 149:156823d33999 | 525 | } |
<> | 149:156823d33999 | 526 | //SPI_SET_SUSPEND_CYCLE(spi_base, 4); |
<> | 149:156823d33999 | 527 | // Enable tx/rx FIFO threshold interrupt |
<> | 149:156823d33999 | 528 | SPI_EnableInt(spi_base, SPI_FIFO_RXTH_INT_MASK | SPI_FIFO_TXTH_INT_MASK); |
<> | 149:156823d33999 | 529 | } |
<> | 149:156823d33999 | 530 | else { |
<> | 149:156823d33999 | 531 | SPI_DisableInt(spi_base, SPI_FIFO_RXTH_INT_MASK | SPI_FIFO_TXTH_INT_MASK); |
<> | 149:156823d33999 | 532 | } |
<> | 149:156823d33999 | 533 | } |
<> | 149:156823d33999 | 534 | |
<> | 149:156823d33999 | 535 | static uint32_t spi_event_check(spi_t *obj) |
<> | 149:156823d33999 | 536 | { |
<> | 149:156823d33999 | 537 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 538 | uint32_t event = 0; |
<> | 149:156823d33999 | 539 | |
<> | 149:156823d33999 | 540 | if (obj->spi.dma_usage == DMA_USAGE_NEVER) { |
<> | 149:156823d33999 | 541 | uint32_t n_rec = spi_master_read_asynch(obj); |
<> | 149:156823d33999 | 542 | spi_master_write_asynch(obj, n_rec); |
<> | 149:156823d33999 | 543 | } |
<> | 149:156823d33999 | 544 | |
<> | 149:156823d33999 | 545 | if (spi_is_tx_complete(obj) && spi_is_rx_complete(obj)) { |
<> | 149:156823d33999 | 546 | event |= SPI_EVENT_COMPLETE; |
<> | 149:156823d33999 | 547 | } |
<> | 149:156823d33999 | 548 | |
<> | 149:156823d33999 | 549 | // Receive FIFO Overrun |
<> | 149:156823d33999 | 550 | if (spi_base->STATUS & SPI_STATUS_RXOVIF_Msk) { |
<> | 149:156823d33999 | 551 | spi_base->STATUS = SPI_STATUS_RXOVIF_Msk; |
<> | 149:156823d33999 | 552 | // In case of tx length > rx length on DMA way |
<> | 149:156823d33999 | 553 | if (obj->spi.dma_usage == DMA_USAGE_NEVER) { |
<> | 149:156823d33999 | 554 | event |= SPI_EVENT_RX_OVERFLOW; |
<> | 149:156823d33999 | 555 | } |
<> | 149:156823d33999 | 556 | } |
<> | 149:156823d33999 | 557 | |
<> | 149:156823d33999 | 558 | // Receive Time-Out |
<> | 149:156823d33999 | 559 | if (spi_base->STATUS & SPI_STATUS_RXTOIF_Msk) { |
<> | 149:156823d33999 | 560 | spi_base->STATUS = SPI_STATUS_RXTOIF_Msk; |
<> | 149:156823d33999 | 561 | //event |= SPI_EVENT_ERROR; |
<> | 149:156823d33999 | 562 | } |
<> | 149:156823d33999 | 563 | // Transmit FIFO Under-Run |
<> | 149:156823d33999 | 564 | if (spi_base->STATUS & SPI_STATUS_TXUFIF_Msk) { |
<> | 149:156823d33999 | 565 | spi_base->STATUS = SPI_STATUS_TXUFIF_Msk; |
<> | 149:156823d33999 | 566 | event |= SPI_EVENT_ERROR; |
<> | 149:156823d33999 | 567 | } |
<> | 149:156823d33999 | 568 | |
<> | 149:156823d33999 | 569 | return event; |
<> | 149:156823d33999 | 570 | } |
<> | 149:156823d33999 | 571 | |
<> | 149:156823d33999 | 572 | /** |
<> | 149:156823d33999 | 573 | * Send words from the SPI TX buffer until the send limit is reached or the TX FIFO is full |
<> | 149:156823d33999 | 574 | * tx_limit is provided to ensure that the number of SPI frames (words) in flight can be managed. |
<> | 149:156823d33999 | 575 | * @param[in] obj The SPI object on which to operate |
<> | 149:156823d33999 | 576 | * @param[in] tx_limit The maximum number of words to send |
<> | 149:156823d33999 | 577 | * @return The number of SPI words that have been transfered |
<> | 149:156823d33999 | 578 | */ |
<> | 149:156823d33999 | 579 | static uint32_t spi_master_write_asynch(spi_t *obj, uint32_t tx_limit) |
<> | 149:156823d33999 | 580 | { |
<> | 149:156823d33999 | 581 | uint32_t n_words = 0; |
<> | 149:156823d33999 | 582 | uint32_t tx_rmn = obj->tx_buff.length - obj->tx_buff.pos; |
<> | 149:156823d33999 | 583 | uint32_t rx_rmn = obj->rx_buff.length - obj->rx_buff.pos; |
<> | 149:156823d33999 | 584 | uint32_t max_tx = NU_MAX(tx_rmn, rx_rmn); |
<> | 149:156823d33999 | 585 | max_tx = NU_MIN(max_tx, tx_limit); |
<> | 149:156823d33999 | 586 | uint8_t data_width = spi_get_data_width(obj); |
<> | 149:156823d33999 | 587 | uint8_t bytes_per_word = (data_width + 7) / 8; |
<> | 149:156823d33999 | 588 | uint8_t *tx = (uint8_t *)(obj->tx_buff.buffer) + bytes_per_word * obj->tx_buff.pos; |
<> | 149:156823d33999 | 589 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 590 | |
<> | 149:156823d33999 | 591 | while ((n_words < max_tx) && spi_writeable(obj)) { |
<> | 149:156823d33999 | 592 | if (spi_is_tx_complete(obj)) { |
<> | 149:156823d33999 | 593 | // Transmit dummy as transmit buffer is empty |
<> | 149:156823d33999 | 594 | SPI_WRITE_TX(spi_base, 0); |
<> | 149:156823d33999 | 595 | } |
<> | 149:156823d33999 | 596 | else { |
<> | 149:156823d33999 | 597 | switch (bytes_per_word) { |
<> | 149:156823d33999 | 598 | case 4: |
<> | 149:156823d33999 | 599 | SPI_WRITE_TX(spi_base, nu_get32_le(tx)); |
<> | 149:156823d33999 | 600 | tx += 4; |
<> | 149:156823d33999 | 601 | break; |
<> | 149:156823d33999 | 602 | case 2: |
<> | 149:156823d33999 | 603 | SPI_WRITE_TX(spi_base, nu_get16_le(tx)); |
<> | 149:156823d33999 | 604 | tx += 2; |
<> | 149:156823d33999 | 605 | break; |
<> | 149:156823d33999 | 606 | case 1: |
<> | 149:156823d33999 | 607 | SPI_WRITE_TX(spi_base, *((uint8_t *) tx)); |
<> | 149:156823d33999 | 608 | tx += 1; |
<> | 149:156823d33999 | 609 | break; |
<> | 149:156823d33999 | 610 | } |
<> | 149:156823d33999 | 611 | |
<> | 149:156823d33999 | 612 | obj->tx_buff.pos ++; |
<> | 149:156823d33999 | 613 | } |
<> | 149:156823d33999 | 614 | n_words ++; |
<> | 149:156823d33999 | 615 | } |
<> | 149:156823d33999 | 616 | |
<> | 149:156823d33999 | 617 | //Return the number of words that have been sent |
<> | 149:156823d33999 | 618 | return n_words; |
<> | 149:156823d33999 | 619 | } |
<> | 149:156823d33999 | 620 | |
<> | 149:156823d33999 | 621 | /** |
<> | 149:156823d33999 | 622 | * Read SPI words out of the RX FIFO |
<> | 149:156823d33999 | 623 | * Continues reading words out of the RX FIFO until the following condition is met: |
<> | 149:156823d33999 | 624 | * o There are no more words in the FIFO |
<> | 149:156823d33999 | 625 | * OR BOTH OF: |
<> | 149:156823d33999 | 626 | * o At least as many words as the TX buffer have been received |
<> | 149:156823d33999 | 627 | * o At least as many words as the RX buffer have been received |
<> | 149:156823d33999 | 628 | * This way, RX overflows are not generated when the TX buffer size exceeds the RX buffer size |
<> | 149:156823d33999 | 629 | * @param[in] obj The SPI object on which to operate |
<> | 149:156823d33999 | 630 | * @return Returns the number of words extracted from the RX FIFO |
<> | 149:156823d33999 | 631 | */ |
<> | 149:156823d33999 | 632 | static uint32_t spi_master_read_asynch(spi_t *obj) |
<> | 149:156823d33999 | 633 | { |
<> | 149:156823d33999 | 634 | uint32_t n_words = 0; |
<> | 149:156823d33999 | 635 | uint32_t tx_rmn = obj->tx_buff.length - obj->tx_buff.pos; |
<> | 149:156823d33999 | 636 | uint32_t rx_rmn = obj->rx_buff.length - obj->rx_buff.pos; |
<> | 149:156823d33999 | 637 | uint32_t max_rx = NU_MAX(tx_rmn, rx_rmn); |
<> | 149:156823d33999 | 638 | uint8_t data_width = spi_get_data_width(obj); |
<> | 149:156823d33999 | 639 | uint8_t bytes_per_word = (data_width + 7) / 8; |
<> | 149:156823d33999 | 640 | uint8_t *rx = (uint8_t *)(obj->rx_buff.buffer) + bytes_per_word * obj->rx_buff.pos; |
<> | 149:156823d33999 | 641 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 642 | |
<> | 149:156823d33999 | 643 | while ((n_words < max_rx) && spi_readable(obj)) { |
<> | 149:156823d33999 | 644 | if (spi_is_rx_complete(obj)) { |
<> | 149:156823d33999 | 645 | // Disregard as receive buffer is full |
<> | 149:156823d33999 | 646 | SPI_READ_RX(spi_base); |
<> | 149:156823d33999 | 647 | } |
<> | 149:156823d33999 | 648 | else { |
<> | 149:156823d33999 | 649 | switch (bytes_per_word) { |
<> | 149:156823d33999 | 650 | case 4: { |
<> | 149:156823d33999 | 651 | uint32_t val = SPI_READ_RX(spi_base); |
<> | 149:156823d33999 | 652 | nu_set32_le(rx, val); |
<> | 149:156823d33999 | 653 | rx += 4; |
<> | 149:156823d33999 | 654 | break; |
<> | 149:156823d33999 | 655 | } |
<> | 149:156823d33999 | 656 | case 2: { |
<> | 149:156823d33999 | 657 | uint16_t val = SPI_READ_RX(spi_base); |
<> | 149:156823d33999 | 658 | nu_set16_le(rx, val); |
<> | 149:156823d33999 | 659 | rx += 2; |
<> | 149:156823d33999 | 660 | break; |
<> | 149:156823d33999 | 661 | } |
<> | 149:156823d33999 | 662 | case 1: |
<> | 149:156823d33999 | 663 | *rx ++ = SPI_READ_RX(spi_base); |
<> | 149:156823d33999 | 664 | break; |
<> | 149:156823d33999 | 665 | } |
<> | 149:156823d33999 | 666 | |
<> | 149:156823d33999 | 667 | obj->rx_buff.pos ++; |
<> | 149:156823d33999 | 668 | } |
<> | 149:156823d33999 | 669 | n_words ++; |
<> | 149:156823d33999 | 670 | } |
<> | 149:156823d33999 | 671 | |
<> | 149:156823d33999 | 672 | // Return the number of words received |
<> | 149:156823d33999 | 673 | return n_words; |
<> | 149:156823d33999 | 674 | } |
<> | 149:156823d33999 | 675 | |
<> | 149:156823d33999 | 676 | static void spi_buffer_set(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length) |
<> | 149:156823d33999 | 677 | { |
<> | 149:156823d33999 | 678 | obj->tx_buff.buffer = (void *) tx; |
<> | 149:156823d33999 | 679 | obj->tx_buff.length = tx_length; |
<> | 149:156823d33999 | 680 | obj->tx_buff.pos = 0; |
<> | 149:156823d33999 | 681 | obj->tx_buff.width = spi_get_data_width(obj); |
<> | 149:156823d33999 | 682 | obj->rx_buff.buffer = rx; |
<> | 149:156823d33999 | 683 | obj->rx_buff.length = rx_length; |
<> | 149:156823d33999 | 684 | obj->rx_buff.pos = 0; |
<> | 149:156823d33999 | 685 | obj->rx_buff.width = spi_get_data_width(obj); |
<> | 149:156823d33999 | 686 | } |
<> | 149:156823d33999 | 687 | |
<> | 149:156823d33999 | 688 | static void spi_check_dma_usage(DMAUsage *dma_usage, int *dma_ch_tx, int *dma_ch_rx) |
<> | 149:156823d33999 | 689 | { |
<> | 149:156823d33999 | 690 | if (*dma_usage != DMA_USAGE_NEVER) { |
<> | 149:156823d33999 | 691 | if (*dma_ch_tx == DMA_ERROR_OUT_OF_CHANNELS) { |
<> | 149:156823d33999 | 692 | *dma_ch_tx = dma_channel_allocate(DMA_CAP_NONE); |
<> | 149:156823d33999 | 693 | } |
<> | 149:156823d33999 | 694 | if (*dma_ch_rx == DMA_ERROR_OUT_OF_CHANNELS) { |
<> | 149:156823d33999 | 695 | *dma_ch_rx = dma_channel_allocate(DMA_CAP_NONE); |
<> | 149:156823d33999 | 696 | } |
<> | 149:156823d33999 | 697 | |
<> | 149:156823d33999 | 698 | if (*dma_ch_tx == DMA_ERROR_OUT_OF_CHANNELS || *dma_ch_rx == DMA_ERROR_OUT_OF_CHANNELS) { |
<> | 149:156823d33999 | 699 | *dma_usage = DMA_USAGE_NEVER; |
<> | 149:156823d33999 | 700 | } |
<> | 149:156823d33999 | 701 | } |
<> | 149:156823d33999 | 702 | |
<> | 149:156823d33999 | 703 | if (*dma_usage == DMA_USAGE_NEVER) { |
<> | 149:156823d33999 | 704 | dma_channel_free(*dma_ch_tx); |
<> | 149:156823d33999 | 705 | *dma_ch_tx = DMA_ERROR_OUT_OF_CHANNELS; |
<> | 149:156823d33999 | 706 | dma_channel_free(*dma_ch_rx); |
<> | 149:156823d33999 | 707 | *dma_ch_rx = DMA_ERROR_OUT_OF_CHANNELS; |
<> | 149:156823d33999 | 708 | } |
<> | 149:156823d33999 | 709 | } |
<> | 149:156823d33999 | 710 | |
<> | 149:156823d33999 | 711 | static uint8_t spi_get_data_width(spi_t *obj) |
<> | 149:156823d33999 | 712 | { |
<> | 149:156823d33999 | 713 | SPI_T *spi_base = (SPI_T *) NU_MODBASE(obj->spi.spi); |
<> | 149:156823d33999 | 714 | |
<> | 153:fa9ff456f731 | 715 | uint32_t data_width = ((spi_base->CTL & SPI_CTL_DWIDTH_Msk) >> SPI_CTL_DWIDTH_Pos); |
<> | 153:fa9ff456f731 | 716 | if (data_width == 0) { |
<> | 153:fa9ff456f731 | 717 | data_width = 32; |
<> | 153:fa9ff456f731 | 718 | } |
<> | 153:fa9ff456f731 | 719 | |
<> | 153:fa9ff456f731 | 720 | return data_width; |
<> | 149:156823d33999 | 721 | } |
<> | 149:156823d33999 | 722 | |
<> | 149:156823d33999 | 723 | static int spi_is_tx_complete(spi_t *obj) |
<> | 149:156823d33999 | 724 | { |
<> | 149:156823d33999 | 725 | // ???: Exclude tx fifo empty check due to no such interrupt on DMA way |
<> | 149:156823d33999 | 726 | return (obj->tx_buff.pos == obj->tx_buff.length); |
<> | 149:156823d33999 | 727 | //return (obj->tx_buff.pos == obj->tx_buff.length && SPI_GET_TX_FIFO_EMPTY_FLAG(((SPI_T *) NU_MODBASE(obj->spi.spi)))); |
<> | 149:156823d33999 | 728 | } |
<> | 149:156823d33999 | 729 | |
<> | 149:156823d33999 | 730 | static int spi_is_rx_complete(spi_t *obj) |
<> | 149:156823d33999 | 731 | { |
<> | 149:156823d33999 | 732 | return (obj->rx_buff.pos == obj->rx_buff.length); |
<> | 149:156823d33999 | 733 | } |
<> | 149:156823d33999 | 734 | |
<> | 149:156823d33999 | 735 | static void spi_dma_handler_tx(uint32_t id, uint32_t event_dma) |
<> | 149:156823d33999 | 736 | { |
<> | 149:156823d33999 | 737 | spi_t *obj = (spi_t *) id; |
<> | 149:156823d33999 | 738 | |
<> | 149:156823d33999 | 739 | // FIXME: Pass this error to caller |
<> | 149:156823d33999 | 740 | if (event_dma & DMA_EVENT_ABORT) { |
<> | 149:156823d33999 | 741 | } |
<> | 149:156823d33999 | 742 | // Expect SPI IRQ will catch this transfer done event |
<> | 149:156823d33999 | 743 | if (event_dma & DMA_EVENT_TRANSFER_DONE) { |
<> | 149:156823d33999 | 744 | obj->tx_buff.pos = obj->tx_buff.length; |
<> | 149:156823d33999 | 745 | } |
<> | 149:156823d33999 | 746 | // FIXME: Pass this error to caller |
<> | 149:156823d33999 | 747 | if (event_dma & DMA_EVENT_TIMEOUT) { |
<> | 149:156823d33999 | 748 | } |
<> | 149:156823d33999 | 749 | |
<> | 149:156823d33999 | 750 | const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab); |
<> | 149:156823d33999 | 751 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 752 | MBED_ASSERT(modinit->modname == obj->spi.spi); |
<> | 149:156823d33999 | 753 | |
<> | 149:156823d33999 | 754 | void (*vec)(void) = (void (*)(void)) NVIC_GetVector(modinit->irq_n); |
<> | 149:156823d33999 | 755 | vec(); |
<> | 149:156823d33999 | 756 | } |
<> | 149:156823d33999 | 757 | |
<> | 149:156823d33999 | 758 | static void spi_dma_handler_rx(uint32_t id, uint32_t event_dma) |
<> | 149:156823d33999 | 759 | { |
<> | 149:156823d33999 | 760 | spi_t *obj = (spi_t *) id; |
<> | 149:156823d33999 | 761 | |
<> | 149:156823d33999 | 762 | // FIXME: Pass this error to caller |
<> | 149:156823d33999 | 763 | if (event_dma & DMA_EVENT_ABORT) { |
<> | 149:156823d33999 | 764 | } |
<> | 149:156823d33999 | 765 | // Expect SPI IRQ will catch this transfer done event |
<> | 149:156823d33999 | 766 | if (event_dma & DMA_EVENT_TRANSFER_DONE) { |
<> | 149:156823d33999 | 767 | obj->rx_buff.pos = obj->rx_buff.length; |
<> | 149:156823d33999 | 768 | } |
<> | 149:156823d33999 | 769 | // FIXME: Pass this error to caller |
<> | 149:156823d33999 | 770 | if (event_dma & DMA_EVENT_TIMEOUT) { |
<> | 149:156823d33999 | 771 | } |
<> | 149:156823d33999 | 772 | |
<> | 149:156823d33999 | 773 | const struct nu_modinit_s *modinit = get_modinit(obj->spi.spi, spi_modinit_tab); |
<> | 149:156823d33999 | 774 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 775 | MBED_ASSERT(modinit->modname == obj->spi.spi); |
<> | 149:156823d33999 | 776 | |
<> | 149:156823d33999 | 777 | void (*vec)(void) = (void (*)(void)) NVIC_GetVector(modinit->irq_n); |
<> | 149:156823d33999 | 778 | vec(); |
<> | 149:156823d33999 | 779 | } |
<> | 149:156823d33999 | 780 | |
<> | 149:156823d33999 | 781 | #endif |
<> | 149:156823d33999 | 782 | |
<> | 149:156823d33999 | 783 | #endif |