John Karatka / mbed

mbed

Fork of mbed-dev by mbed official

targets/TARGET_ONSEMI/TARGET_NCS36510/gpio.h@149:156823d33999, 2016-10-28 (annotated)

Committer:
<>
Date:
Fri Oct 28 11:17:30 2016 +0100
Revision:
149:156823d33999
This updates the lib to the mbed lib v128



NOTE: This release includes a restructuring of the file and directory locations and thus some

include paths in your code may need updating accordingly.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /**
<> 149:156823d33999 2 ******************************************************************************
<> 149:156823d33999 3 * @file gpio.h
<> 149:156823d33999 4 * @brief (API) Public header of GPIO driver
<> 149:156823d33999 5 * @internal
<> 149:156823d33999 6 * @author ON Semiconductor
<> 149:156823d33999 7 * $Rev: 3724 $
<> 149:156823d33999 8 * $Date: 2015-09-14 14:35:42 +0530 (Mon, 14 Sep 2015) $
<> 149:156823d33999 9 ******************************************************************************
<> 149:156823d33999 10 * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
<> 149:156823d33999 11 * All rights reserved. This software and/or documentation is licensed by ON Semiconductor
<> 149:156823d33999 12 * under limited terms and conditions. The terms and conditions pertaining to the software
<> 149:156823d33999 13 * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
<> 149:156823d33999 14 * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
<> 149:156823d33999 15 * if applicable the software license agreement. Do not use this software and/or
<> 149:156823d33999 16 * documentation unless you have carefully read and you agree to the limited terms and
<> 149:156823d33999 17 * conditions. By using this software and/or documentation, you agree to the limited
<> 149:156823d33999 18 * terms and conditions.
<> 149:156823d33999 19 *
<> 149:156823d33999 20 * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
<> 149:156823d33999 21 * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
<> 149:156823d33999 22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
<> 149:156823d33999 23 * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
<> 149:156823d33999 24 * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
<> 149:156823d33999 25 * @endinternal
<> 149:156823d33999 26 *
<> 149:156823d33999 27 * @ingroup gpio
<> 149:156823d33999 28 *
<> 149:156823d33999 29 * @details
<> 149:156823d33999 30 *
<> 149:156823d33999 31 * <h1> General description </h1>
<> 149:156823d33999 32 * <p>
<> 149:156823d33999 33 * The APB GPIO is a configurable module allowing the use of 14 I/O lines.
<> 149:156823d33999 34 * Each line can be configured independently.
<> 149:156823d33999 35 * The GPIO module supports a wide variety of features concerning interrupts,
<> 149:156823d33999 36 * which can be triggered by a low level, high level, positive or negative edge,
<> 149:156823d33999 37 * or both edges.
<> 149:156823d33999 38 * </p>
<> 149:156823d33999 39 *
<> 149:156823d33999 40 */
<> 149:156823d33999 41
<> 149:156823d33999 42 #ifndef GPIO_H_
<> 149:156823d33999 43 #define GPIO_H_
<> 149:156823d33999 44
<> 149:156823d33999 45 #ifdef __cplusplus
<> 149:156823d33999 46 extern "C" {
<> 149:156823d33999 47 #endif
<> 149:156823d33999 48
<> 149:156823d33999 49 #include "memory_map.h"
<> 149:156823d33999 50 #include "gpio_map.h"
<> 149:156823d33999 51 #include "pad_map.h"
<> 149:156823d33999 52 #include "crossbar.h"
<> 149:156823d33999 53 #include "clock.h"
<> 149:156823d33999 54 #include "pad.h"
<> 149:156823d33999 55
<> 149:156823d33999 56
<> 149:156823d33999 57 /** output configuration push/pull */
<> 149:156823d33999 58 #define PAD_OUTCFG_PUSHPULL (uint8_t)0x00
<> 149:156823d33999 59
<> 149:156823d33999 60 /** output configuration open drain */
<> 149:156823d33999 61 #define PAD_OOUTCFG_OPENDRAIN (uint8_t)0x01
<> 149:156823d33999 62
<> 149:156823d33999 63 /** no pull up nor pull down */
<> 149:156823d33999 64 #define PAD_PULL_NONE (uint8_t)0x01
<> 149:156823d33999 65
<> 149:156823d33999 66 /** pull down */
<> 149:156823d33999 67 #define PAD_PULL_DOWN (uint8_t)0x00
<> 149:156823d33999 68
<> 149:156823d33999 69 /** pull up */
<> 149:156823d33999 70 #define PAD_PULL_UP (uint8_t)0x03
<> 149:156823d33999 71
<> 149:156823d33999 72 /* Number of DIO lines supported by NCS36510 */
<> 149:156823d33999 73 #define NUMBER_OF_GPIO ((uint8_t)0x12)
<> 149:156823d33999 74
<> 149:156823d33999 75 /* All DIO lines set to 1 */
<> 149:156823d33999 76 #define IO_ALL ((uint32_t)0x3FFFF)
<> 149:156823d33999 77 #define IO_NONE ((uint32_t)0x00000)
<> 149:156823d33999 78
<> 149:156823d33999 79 /* Gpio handler */
<> 149:156823d33999 80 void fGpioHandler(void);
<> 149:156823d33999 81
<> 149:156823d33999 82 #ifdef __cplusplus
<> 149:156823d33999 83 }
<> 149:156823d33999 84 #endif
<> 149:156823d33999 85
<> 149:156823d33999 86 #endif /* GPIO_H_ */