Diego Ostuni
Fork of the GitHub
Diff: st_errno.h
- Revision:
- 0:98fcd1266df0
diff -r 000000000000 -r 98fcd1266df0 st_errno.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/st_errno.h Thu Nov 14 14:36:52 2019 +0000
@@ -0,0 +1,164 @@
+
+/******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/myliberty
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+ * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+******************************************************************************/
+
+
+/*
+ * PROJECT: STxxxx firmware
+ * LANGUAGE: ISO C99
+ */
+
+/*! \file st_errno.h
+ *
+ * \author
+ *
+ * \brief Main error codes
+ *
+ */
+
+#ifndef ST_ERRNO_H
+#define ST_ERRNO_H
+
+/*
+******************************************************************************
+* INCLUDES
+******************************************************************************
+*/
+
+#include "mbed.h"
+
+/*
+******************************************************************************
+* GLOBAL DATA TYPES
+******************************************************************************
+*/
+
+typedef uint16_t ReturnCode; /*!< Standard Return Code type from function. */
+
+/*
+******************************************************************************
+* DEFINES
+******************************************************************************
+*/
+
+
+/*
+ * Error codes to be used within the application.
+ * They are represented by an uint8_t
+ */
+enum {
+ ERR_NONE = 0, /*!< no error occurred */
+ ERR_NOMEM = 1, /*!< not enough memory to perform the requested operation */
+ ERR_BUSY = 2, /*!< device or resource busy */
+ ERR_IO = 3, /*!< generic IO error */
+ ERR_TIMEOUT = 4, /*!< error due to timeout */
+ ERR_REQUEST = 5, /*!< invalid request or requested function can't be executed at the moment */
+ ERR_NOMSG = 6, /*!< No message of desired type */
+ ERR_PARAM = 7, /*!< Parameter error */
+ ERR_SYSTEM = 8, /*!< System error */
+ ERR_FRAMING = 9, /*!< Framing error */
+ ERR_OVERRUN = 10, /*!< lost one or more received bytes */
+ ERR_PROTO = 11, /*!< protocol error */
+ ERR_INTERNAL = 12, /*!< Internal Error */
+ ERR_AGAIN = 13, /*!< Call again */
+ ERR_MEM_CORRUPT = 14, /*!< memory corruption */
+ ERR_NOT_IMPLEMENTED = 15, /*!< not implemented */
+ ERR_PC_CORRUPT = 16, /*!< Program Counter has been manipulated or spike/noise trigger illegal operation */
+ ERR_SEND = 17, /*!< error sending*/
+ ERR_IGNORE = 18, /*!< indicates error detected but to be ignored */
+ ERR_SEMANTIC = 19, /*!< indicates error in state machine (unexpected cmd) */
+ ERR_SYNTAX = 20, /*!< indicates error in state machine (unknown cmd) */
+ ERR_CRC = 21, /*!< crc error */
+ ERR_NOTFOUND = 22, /*!< transponder not found */
+ ERR_NOTUNIQUE = 23, /*!< transponder not unique - more than one transponder in field */
+ ERR_NOTSUPP = 24, /*!< requested operation not supported */
+ ERR_WRITE = 25, /*!< write error */
+ ERR_FIFO = 26, /*!< fifo over or underflow error */
+ ERR_PAR = 27, /*!< parity error */
+ ERR_DONE = 28, /*!< transfer has already finished */
+ ERR_RF_COLLISION = 29, /*!< collision error (Bit Collision or during RF Collision avoidance ) */
+ ERR_HW_OVERRUN = 30, /*!< lost one or more received bytes */
+ ERR_RELEASE_REQ = 31, /*!< device requested release */
+ ERR_SLEEP_REQ = 32, /*!< device requested sleep */
+ ERR_WRONG_STATE = 33, /*!< incorrent state for requested operation */
+ ERR_MAX_RERUNS = 34, /*!< blocking procedure reached maximum runs */
+ ERR_DISABLED = 35, /*!< operation aborted due to disabled configuration */
+ ERR_HW_MISMATCH = 36, /*!< expected hw do not match */
+ ERR_LINK_LOSS = 37, /*!< Other device's field didn't behave as expected: turned off by Initiator in Passive mode, or AP2P did not turn on field */
+ ERR_INVALID_HANDLE = 38, /*!< invalid or not initalized device handle */
+
+ ERR_INCOMPLETE_BYTE = 40, /*!< Incomplete byte rcvd */
+ ERR_INCOMPLETE_BYTE_01 = 41, /*!< Incomplete byte rcvd - 1 bit */
+ ERR_INCOMPLETE_BYTE_02 = 42, /*!< Incomplete byte rcvd - 2 bit */
+ ERR_INCOMPLETE_BYTE_03 = 43, /*!< Incomplete byte rcvd - 3 bit */
+ ERR_INCOMPLETE_BYTE_04 = 44, /*!< Incomplete byte rcvd - 4 bit */
+ ERR_INCOMPLETE_BYTE_05 = 45, /*!< Incomplete byte rcvd - 5 bit */
+ ERR_INCOMPLETE_BYTE_06 = 46, /*!< Incomplete byte rcvd - 6 bit */
+ ERR_INCOMPLETE_BYTE_07 = 47 /*!< Incomplete byte rcvd - 7 bit */
+};
+
+
+/* General Sub-category number */
+#define ERR_GENERIC_GRP (0x0000) /*!< Reserved value for generic error no */
+#define ERR_WARN_GRP (0x0100) /*!< Errors which are not expected in normal operation */
+#define ERR_PROCESS_GRP (0x0200) /*!< Processes management errors */
+#define ERR_SIO_GRP (0x0800) /*!< SIO errors due to logging */
+#define ERR_RINGBUF_GRP (0x0900) /*!< Ring Buffer errors */
+#define ERR_MQ_GRP (0x0A00) /*!< MQ errors */
+#define ERR_TIMER_GRP (0x0B00) /*!< Timer errors */
+#define ERR_RFAL_GRP (0x0C00) /*!< RFAL errors */
+#define ERR_UART_GRP (0x0D00) /*!< UART errors */
+#define ERR_SPI_GRP (0x0E00) /*!< SPI errors */
+#define ERR_I2C_GRP (0x0F00) /*!< I2c errors */
+
+
+#define ERR_INSERT_SIO_GRP(x) (ERR_SIO_GRP | x) /*!< Insert the SIO grp */
+#define ERR_INSERT_RINGBUF_GRP(x) (ERR_RINGBUF_GRP | x) /*!< Insert the Ring Buffer grp */
+#define ERR_INSERT_RFAL_GRP(x) (ERR_RFAL_GRP | x) /*!< Insert the RFAL grp */
+#define ERR_INSERT_SPI_GRP(x) (ERR_SPI_GRP | x) /*!< Insert the spi grp */
+#define ERR_INSERT_I2C_GRP(x) (ERR_I2C_GRP | x) /*!< Insert the i2c grp */
+#define ERR_INSERT_UART_GRP(x) (ERR_UART_GRP | x) /*!< Insert the uart grp */
+#define ERR_INSERT_TIMER_GRP(x) (ERR_TIMER_GRP | x) /*!< Insert the timer grp */
+#define ERR_INSERT_MQ_GRP(x) (ERR_MQ_GRP | x) /*!< Insert the mq grp */
+#define ERR_INSERT_PROCESS_GRP(x) (ERR_PROCESS_GRP | x) /*!< Insert the process grp */
+#define ERR_INSERT_WARN_GRP(x) (ERR_WARN_GRP | x) /*!< Insert the i2c grp */
+#define ERR_INSERT_GENERIC_GRP(x) (ERR_GENERIC_GRP | x) /*!< Insert the generic grp */
+
+
+/*
+******************************************************************************
+* GLOBAL MACROS
+******************************************************************************
+*/
+
+#define ERR_NO_MASK(x) (x & 0x00FF) /*!< Mask the error number */
+
+
+
+/*! Common code to exit a function with the error if function f return error */
+#define EXIT_ON_ERR(r, f) \
+ if (ERR_NONE != (r = f)) \
+ { \
+ return r; \
+ }
+
+#endif /* ST_ERRNO_H */
+