Diego Ostuni
Fork of the GitHub
Diff: st25r3911_interrupt.h
- Revision:
- 0:98fcd1266df0
diff -r 000000000000 -r 98fcd1266df0 st25r3911_interrupt.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/st25r3911_interrupt.h Thu Nov 14 14:36:52 2019 +0000
@@ -0,0 +1,267 @@
+
+/******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/myliberty
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+ * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+******************************************************************************/
+
+
+/*
+ * PROJECT: ST25R3911 firmware
+ * $Revision: $
+ * LANGUAGE: ISO C99
+ */
+
+/*! \file
+ *
+ * \author Ulrich Herrmann
+ *
+ * \brief ST25R3911 Interrupt header file
+ *
+ *
+ * @addtogroup RFAL
+ * @{
+ *
+ * @addtogroup RFAL-HAL
+ * @brief RFAL Hardware Abstraction Layer
+ * @{
+ *
+ * @addtogroup ST25R3911
+ * @brief RFAL ST25R3911 Driver
+ * @{
+ *
+ * @addtogroup ST25R3911_Interrupt
+ * @brief RFAL ST25R3911 Interrupt
+ * @{
+ *
+ */
+
+#ifndef ST25R3911_INTERRUPT_H
+#define ST25R3911_INTERRUPT_H
+
+/*
+******************************************************************************
+* INCLUDES
+******************************************************************************
+*/
+#include "platform1.h"
+#include "ST25R3911.h"
+
+
+/*
+******************************************************************************
+* GLOBAL DEFINES
+******************************************************************************
+*/
+
+/* Main interrupt register. */
+#define ST25R3911_IRQ_MASK_ALL (uint32_t)(0xFFFFFF) /*!< All ST25R3911 interrupt sources. */
+#define ST25R3911_IRQ_MASK_NONE (uint32_t)(0) /*!< No ST25R3911 interrupt source. */
+#define ST25R3911_IRQ_MASK_OSC (uint32_t)(0x80) /*!< ST25R3911 oscillator stable interrupt. */
+#define ST25R3911_IRQ_MASK_FWL (uint32_t)(0x40) /*!< ST25R3911 FIFO water level interrupt. */
+#define ST25R3911_IRQ_MASK_RXS (uint32_t)(0x20) /*!< ST25R3911 start of receive interrupt. */
+#define ST25R3911_IRQ_MASK_RXE (uint32_t)(0x10) /*!< ST25R3911 end of receive interrupt. */
+#define ST25R3911_IRQ_MASK_TXE (uint32_t)(0x08) /*!< ST25R3911 end of transmission interrupt. */
+#define ST25R3911_IRQ_MASK_COL (uint32_t)(0x04) /*!< ST25R3911 bit collision interrupt. */
+
+/* Timer and NFC interrupt register. */
+#define ST25R3911_IRQ_MASK_DCT (uint32_t)(0x8000) /*!< ST25R3911 termination of direct command interrupt. */
+#define ST25R3911_IRQ_MASK_NRE (uint32_t)(0x4000) /*!< ST25R3911 no-response timer expired interrupt. */
+#define ST25R3911_IRQ_MASK_GPE (uint32_t)(0x2000) /*!< ST25R3911 general purpose timer expired interrupt. */
+#define ST25R3911_IRQ_MASK_EON (uint32_t)(0x1000) /*!< ST25R3911 external field on interrupt. */
+#define ST25R3911_IRQ_MASK_EOF (uint32_t)(0x0800) /*!< ST25R3911 external field off interrupt. */
+#define ST25R3911_IRQ_MASK_CAC (uint32_t)(0x0400) /*!< ST25R3911 collision during RF collision avoidance interrupt. */
+#define ST25R3911_IRQ_MASK_CAT (uint32_t)(0x0200) /*!< ST25R3911 minimum guard time expired interrupt. */
+#define ST25R3911_IRQ_MASK_NFCT (uint32_t)(0x0100) /*!< ST25R3911 initiator bit rate recognized interrupt. */
+
+/* Error and wake-up interrupt register. */
+#define ST25R3911_IRQ_MASK_CRC (uint32_t)(0x800000) /*!< ST25R3911 CRC error interrupt. */
+#define ST25R3911_IRQ_MASK_PAR (uint32_t)(0x400000) /*!< ST25R3911 parity error interrupt. */
+#define ST25R3911_IRQ_MASK_ERR2 (uint32_t)(0x200000) /*!< ST25R3911 soft framing error interrupt. */
+#define ST25R3911_IRQ_MASK_ERR1 (uint32_t)(0x100000) /*!< ST25R3911 hard framing error interrupt. */
+#define ST25R3911_IRQ_MASK_WT (uint32_t)(0x080000) /*!< ST25R3911 wake-up interrupt. */
+#define ST25R3911_IRQ_MASK_WAM (uint32_t)(0x040000) /*!< ST25R3911 wake-up due to amplitude interrupt. */
+#define ST25R3911_IRQ_MASK_WPH (uint32_t)(0x020000) /*!< ST25R3911 wake-up due to phase interrupt. */
+#define ST25R3911_IRQ_MASK_WCAP (uint32_t)(0x010000) /*!< ST25R3911 wake-up due to capacitance measurement. */
+
+
+#define ST25R3911_IRQ_MASK_TIM (0x02) /*!< additional interrupts in ST25R3911_REG_IRQ_TIMER_NFC */
+#define ST25R3911_IRQ_MASK_ERR (0x01) /*!< additional interrupts in ST25R3911_REG_IRQ_ERROR_WUP */
+
+
+/*
+******************************************************************************
+* GLOBAL FUNCTION PROTOTYPES
+******************************************************************************
+*/
+
+
+/*!
+ *****************************************************************************
+ * \brief Wait until an ST25R3911 interrupt occurs
+ *
+ * This function is used to access the ST25R3911 interrupt flags. Use this
+ * to wait for max. \a tmo milliseconds for the \b first interrupt indicated
+ * with mask \a mask to occur.
+ *
+ * \param[in] mask : mask indicating the interrupts to wait for.
+ * \param[in] tmo : time in milliseconds until timeout occurs. If set to 0
+ * the functions waits forever.
+ *
+ * \return : 0 if timeout occured otherwise a mask indicating the cleared
+ * interrupts.
+ *
+ *****************************************************************************
+ */
+extern uint32_t st25r3911WaitForInterruptsTimed(uint32_t mask, uint16_t tmo, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+/*!
+ *****************************************************************************
+ * \brief Get status for the given interrupt
+ *
+ * This function is used to check whether the interrupt given by \a mask
+ * has occured. If yes the interrupt gets cleared. This function returns
+ * only status bits which are inside \a mask.
+ *
+ * \param[in] mask : mask indicating the interrupt to check for.
+ *
+ * \return the mask of the interrupts occurred
+ *
+ *****************************************************************************
+ */
+extern uint32_t st25r3911GetInterrupt(uint32_t mask, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+
+/*!
+ *****************************************************************************
+ * \brief Checks if there is an interrupt
+ *
+ * This function is used to check whether the interrupt given by \a mask
+ * has occured.
+ *
+ *****************************************************************************
+ */
+//extern void st25r3911CheckForReceivedInterrupts( SPI* mspiChannel );
+
+
+/*!
+ *****************************************************************************
+ * \brief Init the 3911 interrupt
+ *
+ * This function is used to check whether the interrupt given by \a mask
+ * has occured.
+ *
+ *****************************************************************************
+ */
+extern void st25r3911InitInterrupts( DigitalOut* fieldLED_06 );
+
+
+/*!
+ *****************************************************************************
+ * \brief Modifies the Interrupt
+ *
+ * This function modifies the interrupt
+ *
+ * \param[in] clr_mask : bit mask to be cleared on the interrupt mask
+ * \param[in] set_mask : bit mask to be set on the interrupt mask
+ *****************************************************************************
+ */
+extern void st25r3911ModifyInterrupts(uint32_t clr_mask, uint32_t set_mask,SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+
+/*!
+ *****************************************************************************
+ * \brief Checks received interrupts
+ *
+ * Checks received interrupts and saves the result into global params
+ *****************************************************************************
+ */
+extern void st25r3911CheckForReceivedInterrupts( SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+
+/*!
+ *****************************************************************************
+ * \brief ISR Service routine
+ *
+ * This function modifies the interrupt
+ *****************************************************************************
+ */
+extern void st25r3911Isr( SPI * mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+/*!
+ *****************************************************************************
+ * \brief Enable a given ST25R3911 Interrupt source
+ *
+ * This function enables all interrupts given by \a mask,
+ * ST25R3911_IRQ_MASK_ALL enables all interrupts.
+ *
+ * \param[in] mask: mask indicating the interrupts to be enabled
+ *
+ *****************************************************************************
+ */
+extern void st25r3911EnableInterrupts(uint32_t mask, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+/*!
+ *****************************************************************************
+ * \brief Disable one or more a given ST25R3911 Interrupt sources
+ *
+ * This function disables all interrupts given by \a mask. 0xff disables all.
+ *
+ * \param[in] mask: mask indicating the interrupts to be disabled.
+ *
+ *****************************************************************************
+ */
+extern void st25r3911DisableInterrupts( uint32_t mask,SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+/*!
+ *****************************************************************************
+ * \brief Clear all st25r3911 irq flags
+ *
+ *****************************************************************************
+ */
+extern void st25r3911ClearInterrupts( SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+/*!
+ *****************************************************************************
+ * \brief Sets IRQ callback for the ST25R3911 interrupt
+ *
+ *****************************************************************************
+ */
+extern void st25r3911IRQCallbackSet(void (*cb)());
+
+/*!
+ *****************************************************************************
+ * \brief Sets IRQ callback for the ST25R3911 interrupt
+ *
+ *****************************************************************************
+ */
+extern void st25r3911IRQCallbackRestore(void);
+
+extern uint8_t st25r3911ChipHasWoke( void );
+
+#endif /* ST25R3911_ISR_H */
+
+/**
+ * @}
+ *
+ * @}
+ *
+ * @}
+ *
+ * @}
+ */