Diego Ostuni
Fork of the GitHub
Diff: st25r3911_com.cpp
- Revision:
- 0:98fcd1266df0
diff -r 000000000000 -r 98fcd1266df0 st25r3911_com.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/st25r3911_com.cpp Thu Nov 14 14:36:52 2019 +0000
@@ -0,0 +1,159 @@
+
+/******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/myliberty
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+ * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+******************************************************************************/
+
+
+/*
+ * PROJECT: ST25R3911 firmware
+ * $Revision: $
+ * LANGUAGE: ISO C99
+ */
+
+/*! \file
+ *
+ * \author Ulrich Herrmann
+ *
+ * \brief Implementation of ST25R3911 communication.
+ *
+ */
+
+/*
+******************************************************************************
+* INCLUDES
+******************************************************************************
+*/
+#include "st25r3911_com.h"
+
+
+
+
+
+
+/*
+******************************************************************************
+* GLOBAL FUNCTIONS
+******************************************************************************
+*/
+
+void st25r3911ReadTestRegister(uint8_t reg, uint8_t* val, ST25R3911* mST25, SPI* mspiChannel, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+
+
+// uint8_t rx;
+ // val rx
+ mST25 -> executeCommand(ST25R3911_CMD_TEST_ACCESS, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+ mST25 -> readRegister( reg, val, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+
+
+ return;
+}
+
+void st25r3911WriteTestRegister(uint8_t reg, uint8_t val, ST25R3911* mST25, SPI* mspiChannel, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+
+
+ mST25 -> executeCommand(ST25R3911_CMD_TEST_ACCESS, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+ mST25 -> writeRegister( reg, val, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 );
+
+
+ return;
+}
+
+
+void st25r3911ClrRegisterBits( uint8_t reg, uint8_t clr_mask, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ uint8_t tmp;
+
+ mST25 -> readRegister( reg, &tmp, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+ tmp &= ~clr_mask;
+ mST25 -> writeRegister( reg, tmp, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+
+ return;
+}
+
+
+void st25r3911SetRegisterBits( uint8_t reg, uint8_t set_mask, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ uint8_t tmp;
+
+ mST25 -> readRegister( reg, &tmp, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+ tmp |= set_mask;
+ mST25 -> writeRegister( reg, tmp, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+
+ return;
+}
+
+void st25r3911ChangeRegisterBits(uint8_t reg, uint8_t valueMask, uint8_t value, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ st25r3911ModifyRegister(reg, valueMask, (valueMask & value), mspiChannel, mST25, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+}
+
+void st25r3911ModifyRegister(uint8_t reg, uint8_t clr_mask, uint8_t set_mask, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ uint8_t tmp;
+
+ mST25 -> readRegister( reg, &tmp, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+
+ /* mask out the bits we don't want to change */
+ tmp &= ~clr_mask;
+ /* set the new value */
+ tmp |= set_mask;
+ mST25 -> writeRegister( reg, tmp, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+
+ return;
+}
+
+void st25r3911ChangeTestRegisterBits( uint8_t reg, uint8_t valueMask, uint8_t value, ST25R3911* mST25, SPI* mspiChannel, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ uint8_t rdVal;
+ uint8_t wrVal;
+
+ /* Read current reg value */
+ st25r3911ReadTestRegister(reg, &rdVal, mST25, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+
+ /* Compute new value */
+ wrVal = (rdVal & ~valueMask);
+ wrVal |= (value & valueMask);
+
+ /* Write new reg value */
+ st25r3911WriteTestRegister(reg, wrVal, mST25, mspiChannel, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+
+ return;
+}
+
+
+
+bool st25r3911IsRegValid( uint8_t reg )
+{
+ if( !(( (int8_t)reg >= ST25R3911_REG_IO_CONF1) && (reg <= ST25R3911_REG_CAPACITANCE_MEASURE_RESULT)) &&
+ (reg != ST25R3911_REG_IC_IDENTITY) )
+ {
+ return false;
+ }
+ return true;
+}
+
+/*
+******************************************************************************
+* LOCAL FUNCTIONS
+******************************************************************************
+*/
+