Diego Ostuni
Fork of the GitHub
Diff: rfal_nfcf.cpp
- Revision:
- 0:75fc82583a41
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rfal_nfcf.cpp Thu Nov 14 14:34:50 2019 +0000
@@ -0,0 +1,344 @@
+
+/******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/myliberty
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+ * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+******************************************************************************/
+
+/*
+ * PROJECT: ST25R391x firmware
+ * $Revision: $
+ * LANGUAGE: ISO C99
+ */
+
+/*! \file rfal_nfcf.c
+ *
+ * \author Gustavo Patricio
+ *
+ * \brief Implementation of NFC-F Poller (FeliCa PCD) device
+ *
+ * The definitions and helpers methods provided by this module are
+ * aligned with NFC-F (FeliCa - JIS X6319-4)
+ *
+ */
+
+/*
+ ******************************************************************************
+ * INCLUDES
+ ******************************************************************************
+ */
+#include <platform1.h>
+#include "rfal_nfcf.h"
+#include "utils.h"
+
+/*
+ ******************************************************************************
+ * ENABLE SWITCH
+ ******************************************************************************
+ */
+
+#ifndef RFAL_FEATURE_NFCF
+ #error " RFAL: Module configuration missing. Please enable/disable NFC-F module by setting: RFAL_FEATURE_NFCF "
+#endif
+
+#if RFAL_FEATURE_NFCF
+
+/*
+ ******************************************************************************
+ * GLOBAL DEFINES
+ ******************************************************************************
+ */
+#define RFAL_NFCF_SENSF_REQ_LEN_MIN 5 /*!< SENSF_RES minimum length */
+
+#define RFAL_NFCF_READ_WO_ENCRYPTION_MIN_LEN 15 /*!< Minimum length for a Check Command - T3T 5.4.1 */
+#define RFAL_NFCF_WRITE_WO_ENCRYPTION_MIN_LEN 31 /*!< Minimum length for an Update Command - T3T 5.5.1 */
+
+
+/*
+ ******************************************************************************
+ * GLOBAL MACROS
+ ******************************************************************************
+ */
+#define rfalNfcfSlots2CardNum( s ) (s+1) /*!< Converts Time Slot Number (TSN) into num of slots */
+
+/*
+******************************************************************************
+* GLOBAL TYPES
+******************************************************************************
+*/
+
+/*! Structure/Buffer to hold the SENSF_RES with LEN byte prepended */
+typedef struct{
+ uint8_t LEN; /*!< NFC-F LEN byte */
+ rfalNfcfSensfRes SENSF_RES; /*!< SENSF_RES */
+} rfalNfcfSensfResBuf;
+
+
+/*! Greedy collection for NFCF GRE_POLL_F Activity 1.0 Table 10 */
+typedef struct{
+ uint8_t pollFound; /*!< Number of devices found by the Poll */
+ uint8_t pollCollision; /*!< Number of collisions detected */
+ rfalFeliCaPollRes POLL_F[RFAL_NFCF_POLL_MAXCARDS]; /*!< GRE_POLL_F Activity 1.0 Table 10 */
+} rfalNfcfGreedyF;
+
+
+/*! NFC-F SENSF_REQ format Digital 1.1 8.6.1 */
+typedef struct
+{
+ uint8_t CMD; /*!< Command code: 00h */
+ uint8_t SC[RFAL_NFCF_SENSF_SC_LEN]; /*!< System Code */
+ uint8_t RC; /*!< Request Code */
+ uint8_t TSN; /*!< Time Slot Number */
+} rfalNfcfSensfReq;
+
+
+/*
+******************************************************************************
+* LOCAL VARIABLES
+******************************************************************************
+*/
+static rfalNfcfGreedyF gRfalNfcfGreedyF; /*!< Activity's NFCF Greedy collection */
+
+
+/*
+******************************************************************************
+* LOCAL FUNCTION PROTOTYPES
+******************************************************************************
+*/
+static void rfalNfcfComputeValidSENF( rfalNfcfListenDevice *outDevInfo, uint8_t *curDevIdx, uint8_t devLimit, bool overwrite, bool *nfcDepFound );
+
+
+/*
+******************************************************************************
+* LOCAL VARIABLES
+******************************************************************************
+*/
+
+/*******************************************************************************/
+static void rfalNfcfComputeValidSENF( rfalNfcfListenDevice *outDevInfo, uint8_t *curDevIdx, uint8_t devLimit, bool overwrite, bool *nfcDepFound )
+{
+ uint8_t tmpIdx;
+ bool duplicate;
+ rfalNfcfSensfResBuf *sensfBuf;
+
+
+ /*******************************************************************************/
+ /* Go through all responses check if valid and duplicates */
+ /*******************************************************************************/
+ while( (gRfalNfcfGreedyF.pollFound > 0) && ((*curDevIdx) < devLimit) )
+ {
+ duplicate = false;
+ gRfalNfcfGreedyF.pollFound--;
+
+ /* Point to received SENSF_RES */
+ sensfBuf = (rfalNfcfSensfResBuf*) &gRfalNfcfGreedyF.POLL_F[gRfalNfcfGreedyF.pollFound];
+
+
+ /* Check for devices that are already in device list */
+ for( tmpIdx = 0; tmpIdx < (*curDevIdx); tmpIdx++ )
+ {
+ if( !ST_BYTECMP( sensfBuf->SENSF_RES.NFCID2, outDevInfo[tmpIdx].sensfRes.NFCID2, RFAL_NFCF_NFCID2_LEN ) )
+ {
+ duplicate = true;
+ break;
+ }
+ }
+
+ /* If is a duplicate skip this (and not to overwrite)*/
+ if(duplicate && !overwrite)
+ {
+ continue;
+ }
+
+ /* Check if response length is OK */
+ if( (( sensfBuf->LEN - RFAL_NFCF_HEADER_LEN) < RFAL_NFCF_SENSF_RES_LEN_MIN) || ((sensfBuf->LEN - RFAL_NFCF_HEADER_LEN) > RFAL_NFCF_SENSF_RES_LEN_MAX) )
+ {
+ continue;
+ }
+
+ /* Check if the response is a SENSF_RES / Polling response */
+ if( sensfBuf->SENSF_RES.CMD != RFAL_NFCF_CMD_POLLING_RES )
+ {
+ continue;
+ }
+
+ /* Check if is an overwrite request or new device*/
+ if(duplicate && overwrite)
+ {
+ /* overwrite deviceInfo/GRE_SENSF_RES with SENSF_RES */
+ outDevInfo[tmpIdx].sensfResLen = (sensfBuf->LEN - RFAL_NFCF_LENGTH_LEN);
+ ST_MEMCPY( &outDevInfo[tmpIdx].sensfRes, &sensfBuf->SENSF_RES.CMD, outDevInfo[tmpIdx].sensfResLen );
+ continue;
+ }
+ else
+ {
+ /* fill deviceInfo/GRE_SENSF_RES with new SENSF_RES */
+ outDevInfo[(*curDevIdx)].sensfResLen = (sensfBuf->LEN - RFAL_NFCF_LENGTH_LEN);
+ ST_MEMCPY( &outDevInfo[(*curDevIdx)].sensfRes, &sensfBuf->SENSF_RES.CMD, outDevInfo[(*curDevIdx)].sensfResLen );
+ }
+
+ /* Check if this device supports NFC-DEP and signal it (ACTIVITY 1.1 9.3.6.63) */
+ *nfcDepFound = rfalNfcfIsNfcDepSupported( &outDevInfo[(*curDevIdx)] );
+
+ (*curDevIdx)++;
+ }
+}
+
+/*
+******************************************************************************
+* GLOBAL FUNCTIONS
+******************************************************************************
+*/
+
+/*******************************************************************************/
+ReturnCode rfalNfcfPollerInitialize( rfalBitRate bitRate,SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ ReturnCode ret;
+
+ if( (bitRate != RFAL_BR_212) && (bitRate != RFAL_BR_424) )
+ {
+ return ERR_PARAM;
+ }
+
+ EXIT_ON_ERR( ret, rfalSetMode( RFAL_MODE_POLL_NFCF, bitRate, bitRate, mspiChannel, mST25, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) );
+ rfalSetErrorHandling( RFAL_ERRORHANDLING_NFC );
+
+ rfalSetGT( RFAL_GT_NFCF );
+ rfalSetFDTListen( RFAL_FDT_LISTEN_NFCF_POLLER );
+ rfalSetFDTPoll( RFAL_FDT_POLL_NFCF_POLLER );
+
+ return ERR_NONE;
+}
+
+
+
+/*******************************************************************************/
+ReturnCode rfalNfcfPollerPoll( rfalFeliCaPollSlots slots, uint16_t sysCode, uint8_t reqCode, rfalFeliCaPollRes *cardList, uint8_t *devCnt, uint8_t *collisions, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ return rfalFeliCaPoll( slots, sysCode, reqCode, cardList, rfalNfcfSlots2CardNum(slots), devCnt, collisions, mspiChannel, mST25, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+}
+
+/*******************************************************************************/
+ReturnCode rfalNfcfPollerCheckPresence( SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ gRfalNfcfGreedyF.pollFound = 0;
+ gRfalNfcfGreedyF.pollCollision = 0;
+
+ /* ACTIVITY 1.0 & 1.1 - 9.2.3.17 SENSF_REQ must be with number of slots equal to 4
+ * SC must be 0xFFFF
+ * RC must be 0x00 (No system code info required) */
+ return rfalFeliCaPoll( RFAL_FELICA_4_SLOTS, RFAL_NFCF_SYSTEMCODE, RFAL_FELICA_POLL_RC_NO_REQUEST, gRfalNfcfGreedyF.POLL_F, rfalNfcfSlots2CardNum(RFAL_FELICA_4_SLOTS), &gRfalNfcfGreedyF.pollFound, &gRfalNfcfGreedyF.pollCollision, mspiChannel, mST25, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+}
+
+
+/*******************************************************************************/
+ReturnCode rfalNfcfPollerCollisionResolution( rfalComplianceMode compMode, uint8_t devLimit, rfalNfcfListenDevice *nfcfDevList, uint8_t *devCnt, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 )
+{
+ ReturnCode ret;
+ bool nfcDepFound;
+
+ if( nfcfDevList == NULL || devCnt == NULL )
+ {
+ return ERR_PARAM;
+ }
+
+ *devCnt = 0;
+ nfcDepFound = false;
+
+
+ /*******************************************************************************************/
+ /* ACTIVITY 1.0 - 9.3.6.3 Copy valid SENSF_RES in GRE_POLL_F into GRE_SENSF_RES */
+ /* ACTIVITY 1.0 - 9.3.6.6 The NFC Forum Device MUST remove all entries from GRE_SENSF_RES[]*/
+ /* ACTIVITY 1.1 - 9.3.63.59 Populate GRE_SENSF_RES with data from GRE_POLL_F */
+ /* */
+ /* CON_DEVICES_LIMIT = 0 Just check if devices from Tech Detection exceeds -> always true */
+ /* Allow the number of slots open on Technology Detection */
+ /*******************************************************************************************/
+ rfalNfcfComputeValidSENF( nfcfDevList, devCnt, (devLimit == 0 ? rfalNfcfSlots2CardNum( RFAL_FELICA_4_SLOTS ) : devLimit), false, &nfcDepFound );
+
+
+ /*******************************************************************************/
+ /* ACTIVITY 1.0 - 9.3.6.4 */
+ /* ACTIVITY 1.1 - 9.3.63.60 Check if devices found are lower than the limit */
+ /* and send a SENSF_REQ if so */
+ /*******************************************************************************/
+ if( *devCnt < devLimit )
+ {
+ /* ACTIVITY 1.0 - 9.3.6.5 Copy valid SENSF_RES and then to remove it
+ * ACTIVITY 1.1 - 9.3.6.65 Copy and filter duplicates
+ * For now, due to some devices keep generating different nfcid2, we use 1.0
+ * Phones detected: Samsung Galaxy Nexus,Samsung Galaxy S3,Samsung Nexus S */
+ *devCnt = 0;
+
+ ret = rfalNfcfPollerPoll( RFAL_FELICA_16_SLOTS, RFAL_NFCF_SYSTEMCODE, RFAL_FELICA_POLL_RC_NO_REQUEST, gRfalNfcfGreedyF.POLL_F, &gRfalNfcfGreedyF.pollFound, &gRfalNfcfGreedyF.pollCollision, mspiChannel, mST25, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+ if( ret == ERR_NONE )
+ {
+ rfalNfcfComputeValidSENF( nfcfDevList, devCnt, devLimit, false, &nfcDepFound );
+ }
+
+ /*******************************************************************************/
+ /* ACTIVITY 1.1 - 9.3.6.63 Check if any device supports NFC DEP */
+ /*******************************************************************************/
+ if( nfcDepFound && (compMode == RFAL_COMPLIANCE_MODE_NFC) )
+ {
+ ret = rfalNfcfPollerPoll( RFAL_FELICA_16_SLOTS, RFAL_NFCF_SYSTEMCODE, RFAL_FELICA_POLL_RC_SYSTEM_CODE, gRfalNfcfGreedyF.POLL_F, &gRfalNfcfGreedyF.pollFound, &gRfalNfcfGreedyF.pollCollision, mspiChannel, mST25, gpio_cs, IRQ, fieldLED_01, fieldLED_02, fieldLED_03, fieldLED_04, fieldLED_05, fieldLED_06 ) ;
+ if( ret == ERR_NONE )
+ {
+ rfalNfcfComputeValidSENF( nfcfDevList, devCnt, devLimit, true, &nfcDepFound );
+ }
+ }
+ }
+
+ return ERR_NONE;
+}
+
+
+/*******************************************************************************/
+bool rfalNfcfListenerIsT3TReq( uint8_t* buf, uint16_t bufLen, uint8_t* nfcid2 )
+{
+ /* Check cmd byte */
+ switch( *buf )
+ {
+ case RFAL_NFCF_CMD_READ_WITHOUT_ENCRYPTION:
+ if( bufLen < RFAL_NFCF_READ_WO_ENCRYPTION_MIN_LEN )
+ {
+ return false;
+ }
+ break;
+
+ case RFAL_NFCF_CMD_WRITE_WITHOUT_ENCRYPTION:
+ if( bufLen < RFAL_NFCF_WRITE_WO_ENCRYPTION_MIN_LEN )
+ {
+ return false;
+ }
+ break;
+
+ default:
+ return false;
+ }
+
+ /* Output NFID2 if requested */
+ if( nfcid2 != NULL )
+ {
+ ST_MEMCPY( nfcid2, (uint8_t*)(buf + RFAL_NFCF_CMD_LEN), RFAL_NFCF_NFCID2_LEN );
+ }
+
+ return true;
+}
+
+#endif /* RFAL_FEATURE_NFCF */