Diego Ostuni
Fork of the GitHub
Diff: rfal_iso15693_2.h
- Revision:
- 0:75fc82583a41
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rfal_iso15693_2.h Thu Nov 14 14:34:50 2019 +0000
@@ -0,0 +1,209 @@
+
+/******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/myliberty
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+ * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+******************************************************************************/
+
+/*
+ * PROJECT: ST25R391x firmware
+ * $Revision: $
+ * LANGUAGE: ISO C99
+ */
+
+/*! \file rfal_iso15693.h
+ *
+ * \author Ulrich Herrmann
+ *
+ * \brief Implementation of ISO-15693-2
+ *
+ */
+/*!
+ *
+ */
+
+#ifndef RFAL_ISO_15693_2_H
+#define RFAL_ISO_15693_2_H
+
+/*
+******************************************************************************
+* INCLUDES
+******************************************************************************
+*/
+#include "platform1.h"
+#include "st_errno.h"
+#include <stdbool.h>
+/*
+******************************************************************************
+* GLOBAL DATATYPES
+******************************************************************************
+*/
+/*!
+ * enum holding possible VCD codings
+ */
+typedef enum
+{
+ ISO15693_VCD_CODING_1_4,
+ ISO15693_VCD_CODING_1_256
+}iso15693VcdCoding_t;
+
+/*!
+ * enum holding possible VICC datarates
+ */
+
+/*!
+ * Configuration parameter used by #iso15693PhyConfigure
+ */
+typedef struct
+{
+ iso15693VcdCoding_t coding; /*!< desired VCD coding */
+ bool fastMode; /*!< Fast mode - all pulse numbers and times are divided by 2 */
+}iso15693PhyConfig_t;
+
+/*! Parameters how the stream mode should work */
+struct iso15693StreamConfig {
+ uint8_t useBPSK; /*!< 0: subcarrier, 1:BPSK */
+ uint8_t din; /*!< the divider for the in subcarrier frequency: fc/2^din */
+ uint8_t dout; /*!< the divider for the in subcarrier frequency fc/2^dout */
+ uint8_t report_period_length; /*!< the length of the reporting period 2^report_period_length*/
+};
+/*
+******************************************************************************
+* GLOBAL CONSTANTS
+******************************************************************************
+*/
+
+/* t1min = 308,2us = 4192/fc = 65.5 * 64/fc */
+#define ISO15693_MASK_RECEIVE_TIME (65)
+
+/* t1max = 323,3us = 4384/fc = 68.5 * 64/fc
+ * 12 = 768/fc unmodulated time of single subcarrior SoF */
+#define ISO15693_NO_RESPONSE_TIME (69 + 12)
+
+
+#define ISO15693_REQ_FLAG_TWO_SUBCARRIERS 0x01
+#define ISO15693_REQ_FLAG_HIGH_DATARATE 0x02
+/*
+******************************************************************************
+* GLOBAL FUNCTION PROTOTYPES
+******************************************************************************
+*/
+/*!
+ *****************************************************************************
+ * \brief Initialize the ISO15693 phy.
+ * \note This function needs to be called every time after switching
+ * from a different mode and before #iso15693Initialize
+ *
+ * \param[in] config : ISO15693 phy related configuration (See #iso15693PhyConfig_t)
+ * \param[out] needed_stream_config : return a pointer to the stream config
+ * needed for this iso15693 config. To be used for configure RF chip.
+ *
+ * \return ERR_IO : Error during communication.
+ * \return ERR_NONE : No error.
+ *
+ *****************************************************************************
+ */
+extern ReturnCode iso15693PhyConfigure(const iso15693PhyConfig_t* config,
+ const struct iso15693StreamConfig ** needed_stream_config );
+
+/*!
+ *****************************************************************************
+ * \brief Return current phy configuration.
+ *
+ * This function returns current Phy configuration previously
+ * set by #iso15693PhyConfigure
+ *
+ * \param[out] config : ISO15693 phy configuration.
+ *
+ * \return ERR_NONE : No error.
+ *
+ *****************************************************************************
+ */
+extern ReturnCode iso15693PhyGetConfiguration(iso15693PhyConfig_t* config);
+
+/*!
+ *****************************************************************************
+ * \brief Code an ISO15693 compatible frame
+ *
+ * This function takes \a length bytes from \a buffer, perform proper
+ * encoding and sends out the frame to the ST25R3911.
+ *
+ * \param[in] buffer : data to send, modified to adapt flags.
+ * \param[in] length : number of bytes to send.
+ * \param[in] sendCrc : If set to true, CRC is appended to the frame
+ * \param[in] sendFlags: If set to true, flag field is sent according to
+ * ISO15693.
+ * \param[in] picopassMode : If set to true, the coding will be according to Picopass
+ * \param[out] subbit_total_length : Return the complete bytes which need to
+ * be send for the current coding
+ * \param[in,out] offset : Set to 0 for first transfer, function will update it to
+ point to next byte to be coded
+ * \param[out] outbuf : buffer where the function will store the coded subbit stream
+ * \param[out] outBufSize : the size of the output buffer
+ * \param[out] actOutBufSize : the amount of data stored into the buffer at this call
+ *
+ * \return ERR_IO : Error during communication.
+ * \return ERR_AGAIN : Data was not coded all the way. Call function again with a new/emptied buffer
+ * \return ERR_NO_MEM : In case outBuf is not big enough. Needs to have at
+ least 5 bytes for 1of4 coding and 65 bytes for 1of256 coding
+ * \return ERR_NONE : No error.
+ *
+ *****************************************************************************
+ */
+extern ReturnCode iso15693VCDCode(uint8_t* buffer, uint16_t length, bool sendCrc, bool sendFlags, bool picopassMode,
+ uint16_t *subbit_total_length, uint16_t *offset,
+ uint8_t* outbuf, uint16_t outBufSize, uint16_t* actOutBufSize);
+
+
+/*!
+ *****************************************************************************
+ * \brief Receive an ISO15693 compatible frame
+ *
+ * This function receives an ISO15693 frame from the ST25R3911, decodes the frame
+ * and writes the raw data to \a buffer.
+ * \note Buffer needs to be big enough to hold CRC also (+2 bytes)
+ *
+ * \param[out] inBuf : buffer with the hamming coded stream to be decoded
+ * \param[in] inBufLen : number of bytes to decode (=length of buffer).
+ * \param[out] outBuf : buffer where received data shall be written to.
+ * \param[in] outBufLen : Length of output buffer, should be approx twice the size of inBuf
+ * \param[out] outBufPos : The number of decoded bytes. Could be used in
+ * extended implementation to allow multiple calls
+ * \param[out] bitsBeforeCol : in case of ERR_COLLISION this value holds the
+ * number of bits in the current byte where the collision happened.
+ * \param[in] ignoreBits : number of bits in the beginning where collisions will be ignored
+ * \param[in] picopassMode : if set to true, the decoding will be according to Picopass
+ *
+ * \return ERR_COLLISION : collision occured, data uncorrect
+ * \return ERR_CRC : CRC error, data uncorrect
+ * \return ERR_TIMEOUT : timeout waiting for data.
+ * \return ERR_NONE : No error.
+ *
+ *****************************************************************************
+ */
+extern ReturnCode iso15693VICCDecode(uint8_t *inBuf,
+ uint16_t inBufLen,
+ uint8_t* outBuf,
+ uint16_t outBufLen,
+ uint16_t* outBufPos,
+ uint16_t* bitsBeforeCol,
+ uint16_t ignoreBits,
+ bool picopassMode );
+
+#endif /* RFAL_ISO_15693_2_H */
+