Diff: main.cpp

Revision:

8:edb685e9d93e

Parent:

6:48c44bebe8fb

Child:

10:40d607be2e87

--- a/main.cpp	Mon Jul 23 06:28:17 2018 +0000
+++ b/main.cpp	Fri Sep 07 13:06:09 2018 +0000
@@ -1,226 +1,66 @@
-/************************************************************************************************
-File name:          main.cpp
-Description:        项目激光部分客户端代码
-Author:             秦智
-Date:               June 4, 2018
-Others:             本程序编写在mbed平台(https://os.mbed.com/)上
-
-*************************************************************************************************/
-
 #include "mbed.h"
 #include <math.h>
 #include <cstring>
 #include <stdlib.h>
 #include "SDFileSystem.h"
-#include "networking.h"
 
-
-/////调试
 Serial pc(PA_9, PA_10);
-DigitalOut LED(PB_8);
-/////
+//Serial serial(PA_2, PA_3);
 
-//硬件接口
+char fileName[64];
+char buff[1024];
+
+FILE * fp_open;
+
 // mosi, miso, sclk, cs, name
 SDFileSystem sd(PB_15, PB_14, PB_13, PB_12, "sd");
-//步进电机
-DigitalOut step[2] = {DigitalOut(PC_5), DigitalOut(PA_5)}; //0--x P9,1--y P17
-DigitalOut dir[2] = {DigitalOut(PC_4), DigitalOut(PA_4)}; //0--x,1--y
-DigitalOut en[2] = {DigitalOut(PD_2), DigitalOut(PA_2)}; //0--x,1--y
-//电子开关,激光开关
-DigitalOut switch_GS(PC_15);
-//行程开关
-// DigitalIn switch_pos1(PB_1);   //P25
-// DigitalIn switch_pos2(PA_15);  //P26
-// DigitalIn switch_pos3(PA_11);  //P27
 
-//运行中的全局变量
-volatile bool Working, Getawork, Isend, Dataused, Getdata;
-FILE *fp_drawing; // 存储图案的文件
-int status = 0; //0: 初始化;  1:建立通信;  2:等候任务;  3:等待数据    4:正在执行一个任务
-int now_x, now_y;
-int Endoffile = 0;
-
-// float thedata[50][3];
-// char sdata[1024];
-int Nofdata;
-bool ifreceive;
-
-//与实际有关参数
-float Lenoflattice = 1 ;//mm  取1mm为xy单元  unit_xy/Lenoflattice=100
-int unit_xy = 100;  //单位长度(xy移动一格)对应unit_xy转   大约10cm/3圈/9600step 约96mm/9600step=0.1mm/10step
-int unit_x = 103;  //单位长度(xy移动一格)对应unit_x转   大约10cm/3圈/9600step 约96mm/9600step=0.1mm/10step
-int unit_y = 103;  //单位长度(xy移动一格)对应unit_y转   大约10cm/3圈/9600step 约96mm/9600step=0.1mm/10step
-///Ticker ticker_step;
-float step_halfperiod = 0.002;//0.02;
-int max_x, max_y;
-int dir_x = 1;///调试时调整
-int dir_y = 1;///调试时调整
-int dot_max = 10;      //灰度最大值对应多少次激光点击
-float dot_last = 0.5;    //每次激光点击持续多久
-int H_max = 255;  //灰度值最大值
-
-
-
-
-
-void report()
+void getFileName ()
 {
-    // ser2usb.printf("-1- status: %d \r\n", status);
-    // ser2usb.printf("-2- now_x: %d now_y: %d \r\n", now_x,now_y);
-    //ser2usb.printf("-3- switch_GS: %i \r\n", switch_GS.read());
-    //ser2usb.printf("-4- switch_pos1: %i switch_pos2: %i switch_pos3: %i \r\n", switch_pos1.read(),switch_pos2.read(),switch_pos3.read());
-    //ser2usb.printf("-5- en[0]: %i en[1]: %i \r\n", en[0].read(),en[1].read());
-    //ser2usb.printf("-6- dir[0]: %i dir[1]: %i \r\n", dir[0].read(),dir[1].read());
-    //ser2usb.printf("-7- step[0]: %i step[1]: %i \r\n", step[0].read(),step[1].read());
+    pc.printf("type in a file name:\r\n");
+    pc.scanf("%s", fileName);
+    pc.printf("got file name:%s\r\n", fileName);
 }
 
-void init()
-{
-    status = 0;
-    now_x = 0;
-    now_y = 0;
-    step[0] = 0;
-    step[1] = 0;
-}
-void rotate(int id, int pix) //id= 0--x,1--y  pix=3200为一圈
+void readFile(char * name)
 {
-    if (pix >= 0) {
-        dir[0] = dir_x;
-        dir[1] = dir_y;
-    } else {
-        pix = -pix;
-        dir[0] = 1 - dir_x;
-        dir[1] = 1 - dir_y;
+    fp_open = fopen(name, "r");
+    pc.printf("reading\r\n");
+    for (int i = 0; fscanf(fp_open, "(%s)", buff) == 1; i++) 
+    {
+        pc.printf("(%s)\r\n", buff);
     }
-    for (int i = 0; i < pix; i++) {
-        step[id] = 1;
-        wait(step_halfperiod);
-        step[id] = 0;
-        wait(step_halfperiod);
-    }
+    pc.printf("read done.\r\n");
 }
 
-void moveto(float x, float y)
-{
-    rotate(0, (x - now_x)*unit_xy); //电机旋转
-    rotate(1, (y - now_y)*unit_xy);
-    now_x = x;
-    now_y = y;
-}
-void markdot(float value)
-{
-    //switch_GS=1;
-    int Ndot = floor(value * dot_max / H_max);
-    for (int i = 0; i < Ndot; i++) {
-        switch_GS = 1; // 开激光
-        wait(dot_last); // 等待
-        switch_GS = 0; // 关激光
-    }
-}
-
-void draw()
+void writeFile(char * name)
 {
-    float x, y, v;
-    fp_drawing = fopen("/sd/write.txt", "r"); // 打开文件
-    for (int i = 0; fscanf(fp_drawing, "(%f,%f,%f)", &x, &y, &v) == 3; i++) {
-        pc.printf("(%f,%f,%f)\r\n", x, y, v);
-        moveto(x, y); // 移动到坐标位置
-        markdot(v); // 打点
-    }
-    fclose(fp_drawing); // 关闭文件
-}
-void fuwei()
-{
-    moveto(0, 0);
-    status = 1;
-}
-
-void on_control_cmd(const char* actuator_name, const char* control_value)
-{
-    pc.printf("Received [%s] [%s]\r\n", actuator_name, control_value);
-    if (strcmp(actuator_name, "dat") == 0) {
-        //接受到的坐标数据写入存储卡
-        fprintf(fp_drawing, "%s", control_value);
-    } else if (strcmp(actuator_name, "cmd") == 0) {
-        int the_command = atoi(control_value);
-        if (the_command == 1) {
-            Getawork = 1;
-        } else if (the_command == 2) {
-            Getdata = 1;
+    int a = 0,
+        b = 0,
+        c = 0;
+    fp_open = fopen(name, "w");
+    pc.printf("writing\r\n");
+    pc.printf("type in data(use '0 0 0' to end)\r\n");
+    while(1)
+    {
+        pc.scanf("%d %d %d", &a, &b, &c);
+        if (a == 0 && b == 0 && c == 0)
+            break;
+        else
+        {
+            pc.printf("writing data: (%d,%d,%d)\r\n", a, b, c);
+            fprintf(fp_open, "(%d,%d,%d)", a, b, c);
         }
     }
+    fclose(fp_open);
+    pc.printf("write done.\r\n");
 }
 
-int main()
+int main ()
 {
-    init();     //初始化
-
-    //建立通信
-    status = 1;
-
-    pc.printf("starting\r\n");
-
-    MQTTSocket sock;
-    MClient client(sock);
-
-    //声明所有的传感器，每行一个，每个由名字、单位两部分组成，最后一行必须为空指针作为结尾
-    const char* sensors[][2] = {
-        "report", "",
-        NULL, NULL //最后一行以空指针作为结束标记
-    };
-
-    //声明所有的执行器，每行一个，每个由名字、参数类型两部分组成，最后一行必须为空指针作为结尾
-    const char* actuators[][2] = {
-        "dat", "",
-        "cmd", "",
-        NULL, NULL //最后一行以空指针作为结束标记
-    };
-    pc.printf("connecting...\r\n");
-
-    networking_init(sock, client, "tdxls-iot.xicp.net", sensors, actuators, on_control_cmd);
-
-    pc.printf("Initialization done.\r\n");
-
-    status = 2;
-
-    publish_value(client, "report", "ready.");
-    pc.printf("laser printer send ready.\r\n");
-
-    Getawork = 0;
-    Getdata = 0;
-
-    while (true) {
-        if (status == 2) {
-            if (Getawork) { //收到新任务
-                Getawork = 0;
-                pc.printf("Begin receiving...\r\n");
-                // 打开文件，准备接受坐标数据
-                fp_drawing = fopen("/sd/write.txt", "w");
-                if (fp_drawing) {
-                    pc.printf("File opened\r\n");
-                    publish_value(client, "report", "wait data.");
-                    status = 3;
-                }
-            }
-        } else if (status == 3) {
-            if (Getdata) { //数据接收完
-                Getdata = 0;
-                pc.printf("End receiving...\r\n");
-                fclose(fp_drawing);
-                publish_value(client, "report", "received.");
-                status = 4;
-            }
-        } else if (status == 4) {
-            // pc.printf("debug4 \r\n");
-            // dealdata();
-            pc.printf("Drawing.. \r\n");
-            // usbprintdata();
-            draw();
-            pc.printf("Finished\r\n");
-            publish_value(client, "report", "done.");
-            status = 2;
-        }
-        client.yield(1000);
-    }
+    pc.baud(115200);
+    pc.printf("hello\r\n");
+    getFileName();
+    writeFile(fileName);
+    readFile(fileName);
 }