Deepti AST
Evironmental Shield API
Diff: Envt_Shield_F4_API.cpp
- Revision:
- 1:d37d15b70bc5
- Parent:
- 0:9ac219c9a7df
--- a/Envt_Shield_F4_API.cpp Thu Aug 14 11:39:55 2014 +0000
+++ b/Envt_Shield_F4_API.cpp Tue Aug 19 07:00:40 2014 +0000
@@ -1,88 +1,191 @@
#include "nucleo-f401re.h"
+#include "Envt_Shield_F4_API.h"
+/*#include "x_nucleo_ike01x1_hum_temp.h"
#include "x_nucleo_ike01x1_pressure.h"
-#include "x_nucleo_ike01x1_uv.h"
-#include "x_nucleo_ike01x1_hum_temp.h"
-#include "Envt_Shield_F4_API.h"
+#include "x_nucleo_ike01x1_uv.h"*/
+
+
+uint8_t Envt_Shield_API::Pressure_Init(void)
+{
+ uint8_t ret= BSP_PRESSURE_Init();
+ return ret;
+}
+
+uint8_t Envt_Shield_API::Pressure_isInitialized(void)
+{
+ uint8_t PressureInitialised=BSP_PRESSURE_isInitialized();
+ return PressureInitialised;
+}
+
+void Envt_Shield_API::Pressure_Reset(void)
+{
+ BSP_PRESSURE_Reset();
+}
+
+uint8_t Envt_Shield_API::Pressure_ReadID(void)
+{
+ uint8_t id = BSP_PRESSURE_ReadID();
+ return id;
+}
+
+void Envt_Shield_API::Pressure_ITConfig(
+ void/*PRESSURE_InterruptConfigTypeDef *pIntConfigStruct*/)
+{
+ BSP_PRESSURE_ITConfig();
+}
+
+void Envt_Shield_API::Pressure_EnableIT(uint8_t IntPin)
+{
+ BSP_PRESSURE_EnableIT(IntPin);
+}
+
+void Envt_Shield_API::Pressure_DisableIT(uint8_t IntPin)
+{
+ BSP_PRESSURE_DisableIT(IntPin);
+}
-uint8_t PRESInit=0;
-uint8_t UVInit=0;
-uint8_t HumTempInit=0;
-/*Global variables */
-uint8_t HumTempId=0;
-uint8_t PressID=0;
-int dec_precision = 2;
- volatile float UVI_Value;
- volatile float PRESSURE_Value;
- volatile float HUMIDITY_Value;
- volatile float TEMPERATURE_Value;
-void floatToInt(float in, int32_t *out_int, int32_t *out_dec, int32_t dec_prec);
-Serial pc(SERIAL_TX, SERIAL_RX);
-
-DigitalOut myled(LED1);
+void Envt_Shield_API::Pressure_GetPressure(float* pfData)
+{
+ BSP_PRESSURE_GetPressure(pfData);
+}
+
+void Envt_Shield_API::Pressure_GetTemperature(float* pfData)
+{
+ BSP_PRESSURE_GetTemperature(pfData);
+}
+
+
+uint8_t Envt_Shield_API::Hum_Temp_Init(void)
+{
+ uint8_t ret = BSP_HUM_TEMP_Init();
+ return ret;
+}
+
+uint8_t Envt_Shield_API::Hum_Temp_isInitialized(void)
+{
+ uint8_t HumpTempInitialised=BSP_HUM_TEMP_isInitialized();
+ return HumpTempInitialised;
+}
-void Envt_Shield_API:: floatToInt(float in, int32_t *out_int, int32_t *out_dec, int32_t dec_prec)
+void Envt_Shield_API::Hum_Temp_Reset(void)
+{
+ BSP_HUM_TEMP_Reset();
+}
+
+uint8_t Envt_Shield_API::Hum_Temp_ReadID(void)
{
- *out_int = (int32_t)in;
- in = in - (float)(*out_int);
- *out_dec = (int32_t)(in*dec_prec);
+ uint8_t id = BSP_HUM_TEMP_ReadID();
+ return id;
+}
+
+void Envt_Shield_API::Hum_Temp_ITConfig(
+ void/*HUM_TEMP_InterruptConfigTypeDef *pIntConfig*/)
+{
+ BSP_HUM_TEMP_ITConfig();
+}
+
+void Envt_Shield_API::Hum_Temp_EnableIT(uint8_t IntPin)
+{
+ BSP_HUM_TEMP_EnableIT(IntPin);
+}
+
+void Envt_Shield_API::Hum_Temp_DisableIT(uint8_t IntPin)
+{
+ BSP_HUM_TEMP_DisableIT(IntPin);
}
-void Envt_Shield_API:: init()
+void Envt_Shield_API::Hum_Temp_GetHumidity(float* pfData)
+{
+ BSP_HUM_TEMP_GetHumidity(pfData);
+}
+
+void Envt_Shield_API::Hum_Temp_GetTemperature(float* pfData)
+{
+ BSP_HUM_TEMP_GetTemperature(pfData);
+}
+
+void Envt_Shield_API::Hum_Temp_PowerOFF()
+{
+ BSP_HUM_TEMP_PowerOFF();
+}
+
+uint8_t Envt_Shield_API::UV_Init(void)
+{
+ uint8_t ret = BSP_UV_Init();
+ return ret;
+}
+
+uint8_t Envt_Shield_API::UV_isInitialized(void)
+{
+ uint8_t UvInitialized=BSP_UV_isInitialized();
+ return UvInitialized;
+}
+
+/**
+ * @brief Read ID of Uv component
+ * @param None
+ * @retval ID
+ */
+uint8_t Envt_Shield_API::UV_ReadID(void)
{
- int mul = 1;
- for(int i = 0; i < dec_precision; i++)
- mul = mul*10;
-
- if(!BSP_HUM_TEMP_isInitialized()) {
- BSP_HUM_TEMP_Init(); //This also Inits I2C interface from here.
- }
- HumTempId = BSP_HUM_TEMP_ReadID();
- if(HumTempId==I_AM_HTS221){
- HumTempInit=1;
- }
- /*End Temp Sensor Init*/
-
- /*Initialize the pressure sensors*/
- if(!BSP_PRESSURE_isInitialized()) {
- BSP_PRESSURE_Init(); //This also Inits I2C interface from here.
- PRESInit=1;
- }
- PressID = BSP_PRESSURE_ReadID();
-
- int32_t d1, d2, d3, d4;
-
- pc.printf("Hello World !\n");
- while(1) {
- wait(1);
-
- if(BSP_HUM_TEMP_isInitialized())
- {
- BSP_HUM_TEMP_GetHumidity((float *)&HUMIDITY_Value);
- BSP_HUM_TEMP_GetTemperature((float *)&TEMPERATURE_Value);
-
- floatToInt(HUMIDITY_Value, &d1, &d2, mul);
- floatToInt(TEMPERATURE_Value, &d3, &d4, mul);
- pc.printf("H: %d.%02d T: %d.%02d", d1, d2, d3, d4);
-
- }
-
- if(BSP_PRESSURE_isInitialized())
- {
- BSP_PRESSURE_GetPressure((float *)&PRESSURE_Value);
- floatToInt(PRESSURE_Value, &d1, &d2, mul);
- pc.printf(" P: %d.%02d\n", d1, d2);
-
- }
-
- if(BSP_UV_isInitialized())
- {
- BSP_UV_GetIndex((float *)&UVI_Value);
- floatToInt(UVI_Value, &d1, &d2, mul);
- pc.printf("UV: %d.%02d\n", d1, d2);
- }
-
- pc.printf("Done");
- myled = !myled;
-
- }
+ uint8_t id = BSP_UV_ReadID();
+ return id;
+}
+
+/**
+ * @brief Reboot memory content of UV
+ * @param None
+ * @retval None
+ */
+void Envt_Shield_API::UV_Reset(void)
+{
+ BSP_UV_Reset();
+}
+
+
+/**
+ * @brief Configure INT1 interrupt
+ * @param pIntConfig: pointer to a UVIS3_InterruptConfig_TypeDef
+ * structure that contains the configuration setting for the UVIS3 Interrupt.
+ * @retval None
+ */
+void Envt_Shield_API::UV_ITConfig(void/*UV_InterruptConfigTypeDef *pIntConfig*/)
+{
+ BSP_UV_ITConfig();
+}
+
+/**
+ * @brief Enable INT1 or INT2 interrupt
+ * @param IntPin: Interrupt pin
+ * This parameter can be:
+ * @arg UVIS3_INT1
+ * @arg UVIS3_INT2
+ * @retval None
+ */
+void Envt_Shield_API::UV_EnableIT(uint8_t IntPin)
+{
+ BSP_UV_EnableIT(IntPin);
+}
+
+/**
+ * @brief Disable INT1 or INT2 interrupt
+ * @param IntPin: Interrupt pin
+ * This parameter can be:
+ * @arg UVIS3_INT1
+ * @arg UVIS3_INT2
+ * @retval None
+ */
+void Envt_Shield_API::UV_DisableIT(uint8_t IntPin)
+{
+ BSP_UV_DisableIT(IntPin);
+}
+
+/**
+ * @brief Get Index UV
+ * @param pfData: pointer on floating data
+ * @retval None
+ */
+void Envt_Shield_API::UV_GetIndex(float* pfData)
+{
+ BSP_UV_GetIndex(pfData);
}
\ No newline at end of file
