Revision 3:d566edd8cd34, committed 2016-09-29

Comitter:

Davidroid

Date:

Thu Sep 29 09:57:41 2016 +0000

Parent:

2:2af31245e67e

Commit message:

Added ST_INTERFACES library.

Changed in this revision

diff -r 2af31245e67e -r d566edd8cd34 Components/Interfaces/Component_class.h
--- a/Components/Interfaces/Component_class.h	Fri Apr 29 14:58:30 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,83 +0,0 @@
-/**
- ******************************************************************************
- * @file    Component_class.h
- * @author  AST
- * @version V1.0.0
- * @date    April 13th, 2015
- * @brief   This file contains the abstract class describing the interface of a
- *          generic component.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-
-#ifndef __COMPONENT_CLASS_H
-#define __COMPONENT_CLASS_H
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include <stdint.h>
-
-
-/* Classes  ------------------------------------------------------------------*/
-
-/** An abstract class for Generic components.
- */
-class Component
-{
-public:
-    /**
-     * @brief     Initializing the component.
-     * @param[in] init pointer to device specific initalization structure.
-     * @retval    "0" in case of success, an error code otherwise.
-     */
-    virtual int Init(void *init) = 0;
-
-    /**
-     * @brief      Getting the ID of the component.
-     * @param[out] id pointer to an allocated variable to store the ID into.
-     * @retval     "0" in case of success, an error code otherwise.
-     */
-    virtual int ReadID(uint8_t *id) = 0;
-    
-    /**
-     * @brief  Getting the version of the firmware.
-     * @param  None.
-     * @retval The version of the firmware.
-     */
-    virtual unsigned int GetFwVersion(void) = 0;
-
-};
-
-#endif /* __COMPONENT_CLASS_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

diff -r 2af31245e67e -r d566edd8cd34 Components/Interfaces/StepperMotor_class.h
--- a/Components/Interfaces/StepperMotor_class.h	Fri Apr 29 14:58:30 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,271 +0,0 @@
-/**
- ******************************************************************************
- * @file    StepperMotor_class.h
- * @author  Davide Aliprandi, STMicroelectronics
- * @version V1.1.0
- * @date    April 6th, 2016
- * @brief   This file contains the abstract class describing the interface of a
- *          stepper-motor component.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-
-/* Define to prevent from recursive inclusion --------------------------------*/
-
-#ifndef __STEPPERMOTOR_CLASS_H
-#define __STEPPERMOTOR_CLASS_H
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include <Component_class.h>
-
-
-/* Classes  ------------------------------------------------------------------*/
-
-/** An abstract class for StepperMotor components.
- */
-class StepperMotor : public Component
-{
-public:
-    /**
-     * @brief Rotation modes.
-     */
-    typedef enum
-    {
-        BWD = 0, /* Backward. */
-        FWD = 1  /* Forward. */
-    } direction_t;
-
-    /**
-     * @brief Step modes.
-     */
-    typedef enum
-    {
-        STEP_MODE_FULL = 0, /* Full-step. */
-        STEP_MODE_HALF,     /* Half-step. */
-        STEP_MODE_1_4,      /* 1/4 microstep. */
-        STEP_MODE_1_8,      /* 1/8 microstep. */
-        STEP_MODE_1_16,     /* 1/16 microstep. */
-        STEP_MODE_1_32,     /* 1/32 microstep. */
-        STEP_MODE_1_64,     /* 1/64 microstep. */
-        STEP_MODE_1_128,    /* 1/128 microstep. */
-        STEP_MODE_1_256,    /* 1/256 microstep. */
-        STEP_MODE_UNKNOWN,
-        STEP_MODE_WAVE      /* Full-step one-phase-on*/
-    } step_mode_t;
-
-    /**
-     * @brief  Getting the status.
-     * @param  None.
-     * @retval The status.
-     */
-    virtual unsigned int GetStatus(void) = 0;
-
-    /**
-     * @brief  Getting the position.
-     * @param  None.
-     * @retval The position.
-     */
-    virtual signed int GetPosition(void) = 0;
-
-    /**
-     * @brief  Getting the marked position.
-     * @param  None.
-     * @retval The marked position.
-     */
-    virtual signed int GetMark(void) = 0;
-
-    /**
-     * @brief  Getting the current speed in pps.
-     * @param  None.
-     * @retval The current speed in pps.
-     */
-    virtual unsigned int GetSpeed(void) = 0;
-
-    /**
-     * @brief  Getting the maximum speed in pps.
-     * @param  None.
-     * @retval The maximum speed in pps.
-     */
-    virtual unsigned int GetMaxSpeed(void) = 0;
-
-    /**
-     * @brief  Getting the minimum speed in pps.
-     * @param  None.
-     * @retval The minimum speed in pps.
-     */
-    virtual unsigned int GetMinSpeed(void) = 0;
-
-    /**
-     * @brief  Getting the acceleration in pps^2.
-     * @param  None.
-     * @retval The acceleration in pps^2.
-     */
-    virtual unsigned int GetAcceleration(void) = 0;
-
-    /**
-     * @brief  Getting the deceleration in pps^2.
-     * @param  None.
-     * @retval The deceleration in pps^2.
-     */
-    virtual unsigned int GetDeceleration(void) = 0;
-
-    /**
-     * @brief  Getting the direction of rotation.
-     * @param  None.
-     * @retval The direction of rotation.
-     */
-    virtual direction_t GetDirection(void) = 0;
-
-    /**
-     * @brief  Setting the current position to be the home position.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void SetHome(void) = 0;
-
-    /**
-     * @brief  Setting the current position to be the marked position.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void SetMark(void) = 0;
-
-    /**
-     * @brief  Setting the maximum speed in pps.
-     * @param  speed The maximum speed in pps.
-     * @retval "true" in case of success, "false" otherwise.
-     */
-    virtual bool SetMaxSpeed(unsigned int speed) = 0;
-
-    /**
-     * @brief  Setting the minimum speed in pps.
-     * @param  speed The minimum speed in pps.
-     * @retval "true" in case of success, "false" otherwise.
-     */
-    virtual bool SetMinSpeed(unsigned int speed) = 0;
-
-    /**
-     * @brief  Setting the acceleration in pps^2.
-     * @param  acceleration The acceleration in pps^2.
-     * @retval "true" in case of success, "false" otherwise.
-     */
-    virtual bool SetAcceleration(unsigned int acceleration) = 0;
-
-    /**
-     * @brief  Setting the deceleration in pps^2.
-     * @param  deceleration The deceleration in pps^2.
-     * @retval "true" in case of success, "false" otherwise.
-     */
-    virtual bool SetDeceleration(unsigned int deceleration) = 0;
-
-    /**
-     * @brief  Setting the Step Mode.
-     * @param  step_mode The Step Mode.
-     * @retval "true" in case of success, "false" otherwise.
-     */
-    virtual bool SetStepMode(step_mode_t step_mode) = 0;
-
-    /**
-     * @brief  Going to a specified position.
-     * @param  position The desired position.
-     * @retval None.
-     */
-    virtual void GoTo(signed int position) = 0;
-
-    /**
-     * @brief  Going to the home position.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void GoHome(void) = 0;
-
-    /**
-     * @brief  Going to the marked position.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void GoMark(void) = 0;
-
-    /**
-     * @brief  Running the motor towards a specified direction.
-     * @param  direction The direction of rotation.
-     * @retval None.
-     */
-    virtual void Run(direction_t direction) = 0;
-
-    /**
-     * @brief  Moving the motor towards a specified direction for a certain number of steps.
-     * @param  direction The direction of rotation.
-     * @param  steps The desired number of steps.
-     * @retval None.
-     */
-    virtual void Move(direction_t direction, unsigned int steps) = 0;
-
-    /**
-     * @brief  Stopping the motor through an immediate deceleration up to zero speed.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void SoftStop(void) = 0;
-
-    /**
-     * @brief  Stopping the motor through an immediate infinite deceleration.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void HardStop(void) = 0;
-
-    /**
-     * @brief  Disabling the power bridge after performing a deceleration to zero.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void SoftHiZ(void) = 0;
-
-    /**
-     * @brief  Disabling the power bridge immediately.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void HardHiZ(void) = 0;
-
-    /**
-     * @brief  Waiting while the motor is active.
-     * @param  None.
-     * @retval None.
-     */
-    virtual void WaitWhileActive(void) = 0;
-};
-
-#endif /* __STEPPERMOTOR_CLASS_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 

diff -r 2af31245e67e -r d566edd8cd34 Components/l6208/l6208_class.h
--- a/Components/l6208/l6208_class.h	Fri Apr 29 14:58:30 2016 +0000
+++ b/Components/l6208/l6208_class.h	Thu Sep 29 09:57:41 2016 +0000
@@ -58,10 +58,10 @@
  * Include here interface specific header files.                              *
  *                                                                            *
  * Example:                                                                   *
- *   #include "../Interfaces/Humidity_class.h"                                *
- *   #include "../Interfaces/Temperature_class.h"                             *
+ *   #include "Humidity_class.h"                                              *
+ *   #include "Temperature_class.h"                                           *
  *----------------------------------------------------------------------------*/
-#include "../Interfaces/StepperMotor_class.h"
+#include "StepperMotor.h"
 
 
 /* Classes -------------------------------------------------------------------*/

diff -r 2af31245e67e -r d566edd8cd34 ST_INTERFACES.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ST_INTERFACES.lib	Thu Sep 29 09:57:41 2016 +0000
@@ -0,0 +1,1 @@
+https://developer.mbed.org/teams/ST/code/ST_INTERFACES/#a7810e7acf8d