R1 code for micro:bit based train controller code, requires second micro:bit running tx code to operate - see https://meanderingpi.wordpress.com/ for more information
Fork of mbed-dev-bin by
Diff: DigitalIn.h
- Revision:
- 0:e1a608bb55e8
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DigitalIn.h Thu Apr 07 18:33:58 2016 +0100 @@ -0,0 +1,107 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DIGITALIN_H +#define MBED_DIGITALIN_H + +#include "platform.h" + +#include "gpio_api.h" + +namespace mbed { + +/** A digital input, used for reading the state of a pin + * + * Example: + * @code + * // Flash an LED while a DigitalIn is true + * + * #include "mbed.h" + * + * DigitalIn enable(p5); + * DigitalOut led(LED1); + * + * int main() { + * while(1) { + * if(enable) { + * led = !led; + * } + * wait(0.25); + * } + * } + * @endcode + */ +class DigitalIn { + +public: + /** Create a DigitalIn connected to the specified pin + * + * @param pin DigitalIn pin to connect to + */ + DigitalIn(PinName pin) : gpio() { + gpio_init_in(&gpio, pin); + } + + /** Create a DigitalIn connected to the specified pin + * + * @param pin DigitalIn pin to connect to + * @param mode the initial mode of the pin + */ + DigitalIn(PinName pin, PinMode mode) : gpio() { + gpio_init_in_ex(&gpio, pin, mode); + } + /** Read the input, represented as 0 or 1 (int) + * + * @returns + * An integer representing the state of the input pin, + * 0 for logical 0, 1 for logical 1 + */ + int read() { + return gpio_read(&gpio); + } + + /** Set the input pin mode + * + * @param mode PullUp, PullDown, PullNone, OpenDrain + */ + void mode(PinMode pull) { + gpio_mode(&gpio, pull); + } + + /** Return the output setting, represented as 0 or 1 (int) + * + * @returns + * Non zero value if pin is connected to uc GPIO + * 0 if gpio object was initialized with NC + */ + int is_connected() { + return gpio_is_connected(&gpio); + } + +#ifdef MBED_OPERATORS + /** An operator shorthand for read() + */ + operator int() { + return read(); + } +#endif + +protected: + gpio_t gpio; +}; + +} // namespace mbed + +#endif