Daniel Lee / Mbed OS BG96_K6xF_pelion-example-frdm

K6xF board with BG96 of WIZnet for CatM1 board.

Dependencies:   FXAS21002 FXOS8700Q

This document is based on https://os.mbed.com/teams/NXP/code/pelion-example-frdm/

This code could be access via Cat.M1(BG96 module) of SK telecom network in Korea. Need a WIZnet BG96 board or can connect directly to M2Mnet BG96 module and development board.

board board

  • FRDM-K64F - onboard Ethernet and onboard SD card holder.
  • FRDM-K66F - onboard Ethernet and onboard SD card holder.

-------------------------------

/media/uploads/Daniel_Lee/small_pic.jpg /media/uploads/Daniel_Lee/screen_shot_2019-07-24_at_5.29.42_pm.jpg

  • BG96 RESET = D7
  • BG96 PWRKEY = D9
  • BG96 TX = D1
  • BG96 RX = D0
  • BG96 VCC = VCC(5V)
  • BG96 GND = GND

Requirement

Example functionality

This example showcases the following device functionality:

Read onboard FXOS8700Q accelerometer and magnetometer, and report the values as Pelion LWM2M resources (see image below). (FRDM-K66F only) Read onboard FXAS21002 gyroscope and report the values as Pelion LWM2M resources. On user button click, increment Pelion LWM2M button resource. Allow the user to change the state of the board LED from Pelion LWM2M led_state resource and PUT request.

1. Import the application into your desktop:

mbed import http://os.mbed.com/users/Daniel_Lee/code/BG96_K6xF_pelion-example-frdm/

 cd BG96_K6xF_pelion-example-frdm

2. Install the CLOUD_SDK_API_KEY 

mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>

For instructions on how to generate your API key, please see the documentation.

3. Initialize firmware credentials (done once per repository). You can use the following command: 

mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force

If the above command does not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.9.x or above.

4. Compile and program: 

mbed compile -t <toolchain> -m <TARGET_BOARD>

(supported toolchains : GCC_ARM / ARM / IAR)

5. If successfully connect to cellular networks(SKTelecom) then you can get below message 

[BOOT] Mbed Bootloader
[BOOT] ARM: 00000000000000000000
[BOOT] OEM: 00000000000000000000
[BOOT] Layout: 0 83A8
[BOOT] Active firmware integrity check:
[BOOT] SHA256: 2DD1793-----------------------------------------------------------------
[BOOT] Version: 1563983916
[BOOT] Slot 0 is empty
[BOOT] Active firmware up-to-date
[BOOT] Application's start address: 0x10400
[BOOT] Application's jump address: 0x10B11
[BOOT] Application's stack address: 0x20030000
[BOOT] Forwarding to application...


Starting Simple Pelion Device Management Client example
You can hold the user button during boot to format the storage and change the d.
M2Mnet(BG96) Power ON

Sensors configuration:
FXOS8700Q accelerometer = 0xC7
FXOS8700Q magnetometer  = 0xC7

Connecting to the network using the default network interface...
Connected to the network successfully. IP address: 000:000:000:000:000:000:000:0
Initializing Pelion Device Management Client...
Initialized Pelion Device Management Client. Registering...
Press the user button to increment the LwM2M resource value...
Registered to Pelion Device Management. Endpoint Name: "xx Your Endpoint Name xx"
*** Button notification, status Subscribed (6)

FXOS8700Q mag:   -2.426 x,  -0.902 y,  -1.611 z [gauss]
FXOS8700Q acc:   -0.054 x,  -0.309 y,   4.306 z [g]

Revisions of .gitignore

Revision Date Message Actions
0:a9d53048f0b6 2019-03-25 Initial revision File  Diff  Annotate