Boulus Abu Joudom / MCP4725

DAC Lib

Dependents:   Cube_Mini_Solution Cube_Mini_Solution

mcp4725.h@1:e78abc423fb5, 2013-10-27 (annotated)

Committer:
donalm
Date:
Sun Oct 27 14:03:15 2013 +0000
Revision:
1:e78abc423fb5
Parent:
0:3214e3bbf25c
Child:
2:2288d9dfab02
Tidy up before publishing.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
donalm 0:3214e3bbf25c 1 #ifndef MCP_4725_H
donalm 0:3214e3bbf25c 2 #define MCP_4725_H
donalm 0:3214e3bbf25c 3
donalm 0:3214e3bbf25c 4 #include "stdbool.h"
donalm 0:3214e3bbf25c 5 #include "mbed.h"
donalm 0:3214e3bbf25c 6 #include "I2C.h"
donalm 0:3214e3bbf25c 7
donalm 0:3214e3bbf25c 8
donalm 0:3214e3bbf25c 9 /** MCP4725 class.
donalm 0:3214e3bbf25c 10 * Used for interfacing with a mcp4725 12-Bit Digital-to-Analog Converter.
donalm 0:3214e3bbf25c 11 */
donalm 0:3214e3bbf25c 12 class MCP4725
donalm 0:3214e3bbf25c 13 {
donalm 0:3214e3bbf25c 14 public:
donalm 0:3214e3bbf25c 15 /** The device supports two types of power modes: normal and power-down. In normal mode the device
donalm 0:3214e3bbf25c 16 * operates a normal digital to analog conversion. In power-down mode all digitial to analog
donalm 0:3214e3bbf25c 17 * conversion is stopped, resulting in the device using less power (typically 60nA). Also, in power
donalm 0:3214e3bbf25c 18 * down mode Vout will be pulled to ground using either a 1k, 100k or 500k ohm internal resistors. */
donalm 0:3214e3bbf25c 19 enum PowerMode {
donalm 0:3214e3bbf25c 20 /** In normal mode the device operates a normal D2A conversion. */
donalm 0:3214e3bbf25c 21 Normal=0,
donalm 0:3214e3bbf25c 22 /** Enter the device into a power down mode, and pull Vout to ground using an internal 1k resistor. */
donalm 0:3214e3bbf25c 23 PowerDown1k=1,
donalm 0:3214e3bbf25c 24 /** Enter the device into a power down mode, and pull Vout to ground using an internal 100k resistor. */
donalm 0:3214e3bbf25c 25 PowerDown100k=2,
donalm 0:3214e3bbf25c 26 /** Enter the device into a power down mode, and pull Vout to ground using an internal 500k resistor. */
donalm 0:3214e3bbf25c 27 PowerDown500k=3
donalm 0:3214e3bbf25c 28 };
donalm 0:3214e3bbf25c 29
donalm 0:3214e3bbf25c 30 /** The device supports 3 different I2C bus frequencies.*/
donalm 0:3214e3bbf25c 31 enum BusFrequency {
donalm 0:3214e3bbf25c 32 /** Standard 100kHz bus. */
donalm 0:3214e3bbf25c 33 Standard100kHz,
donalm 0:3214e3bbf25c 34 /** Fast 400kHz bus. */
donalm 0:3214e3bbf25c 35 Fast400kHz,
donalm 1:e78abc423fb5 36 /** High Speed 3.4Mhz bus. WARNING: the test suite fails for the mbed LPC1768 when this frequency is selected - not tested on other platforms.*/
donalm 0:3214e3bbf25c 37 HighSpeed3_4Mhz
donalm 0:3214e3bbf25c 38 };
donalm 0:3214e3bbf25c 39
donalm 0:3214e3bbf25c 40 /** Create an mcp4725 I2C interface
donalm 0:3214e3bbf25c 41 *
donalm 0:3214e3bbf25c 42 * @param sda I2C data line pin
donalm 0:3214e3bbf25c 43 * @param scl I2C clock line pin
donalm 0:3214e3bbf25c 44 * @param bus_frequency the frequency at which the I2C bus is running.
donalm 0:3214e3bbf25c 45 * @param device_address_bits The 3bit address bits of the device.
donalm 0:3214e3bbf25c 46 */
donalm 0:3214e3bbf25c 47 MCP4725(PinName sda, PinName scl, BusFrequency bus_frequency, int device_address_bits);
donalm 0:3214e3bbf25c 48
donalm 0:3214e3bbf25c 49
donalm 0:3214e3bbf25c 50 /* Update the power mode and DAC value.
donalm 0:3214e3bbf25c 51 *
donalm 0:3214e3bbf25c 52 * @param mode The Power mode to set the device into.
donalm 0:3214e3bbf25c 53 * @param dac_value The 12bit dac register data value.
donalm 0:3214e3bbf25c 54 * @param writeToEeprom True if the config is to be stored
donalm 0:3214e3bbf25c 55 * in eeprom, otherwise false
donalm 0:3214e3bbf25c 56 *
donalm 0:3214e3bbf25c 57 * @returns
donalm 0:3214e3bbf25c 58 * 0 on success,
donalm 0:3214e3bbf25c 59 * non-0 on failure
donalm 0:3214e3bbf25c 60 */
donalm 0:3214e3bbf25c 61 int write(enum PowerMode mode, int dac_value, bool writeToEeprom);
donalm 0:3214e3bbf25c 62
donalm 0:3214e3bbf25c 63
donalm 0:3214e3bbf25c 64 /** Read the contents of the dac register, the contents of eeprom, and if an eeprom write is currently active.
donalm 0:3214e3bbf25c 65 *
donalm 0:3214e3bbf25c 66 * @param mode Pointer to variable to store the current power mode.
donalm 0:3214e3bbf25c 67 * @param mode_eeprom Pointer to variable to store the power mode as is stored in eeprom.
donalm 0:3214e3bbf25c 68 * @param dac_value Pointer to variable to store the current dac value.
donalm 0:3214e3bbf25c 69 * @param dac_value_eeprom Pointer to variable to store the dac value as is stored in eeprom.
donalm 0:3214e3bbf25c 70 * @param eeprom_write_in_progress Pointer to variable to store the current eeprom write status.
donalm 0:3214e3bbf25c 71 *
donalm 0:3214e3bbf25c 72 * @returns
donalm 0:3214e3bbf25c 73 * 0 on success,
donalm 0:3214e3bbf25c 74 * non-0 on failure
donalm 0:3214e3bbf25c 75 */
donalm 0:3214e3bbf25c 76 int read(enum PowerMode* mode, enum PowerMode* mode_eeprom, int* dac_value, int* dac_value_eeprom, bool* eeprom_write_in_progress);
donalm 0:3214e3bbf25c 77
donalm 0:3214e3bbf25c 78 protected:
donalm 0:3214e3bbf25c 79 /** mbed I2C interface driver. */
donalm 0:3214e3bbf25c 80 I2C * _i2c_interface;
donalm 0:3214e3bbf25c 81 /** The full i2c device address. */
donalm 0:3214e3bbf25c 82 int _device_address;
donalm 0:3214e3bbf25c 83
donalm 0:3214e3bbf25c 84 };
donalm 0:3214e3bbf25c 85
donalm 0:3214e3bbf25c 86 #endif