Diff: Onewire.cpp

Revision:

1:8e9464e05ddf

Parent:

0:d961f715d82b

Child:

2:b7ee49dbd7ef

diff -r d961f715d82b -r 8e9464e05ddf Onewire.cpp
--- a/Onewire.cpp	Sun Jun 23 15:17:39 2013 +0000
+++ b/Onewire.cpp	Sat Feb 21 17:16:16 2015 +0000
@@ -87,3 +87,154 @@
     return crc;
 }
 
+//
+// You need to use this function to start a search again from the beginning.
+// You do not need to do it for the first search, though you could.
+//
+void Onewire::reset_search()
+{
+  // reset the search state
+  _search_LastDiscrepancy = 0;
+  _search_LastDeviceFlag = false;
+  _search_LastFamilyDiscrepancy = 0;
+  for(int i = 7; ; i--) {
+    _search_ROM_NO[i] = 0;
+    if ( i == 0) break;
+  }
+}
+
+//
+// Perform a search. If this function returns a '1' then it has
+// enumerated the next device and you may retrieve the ROM from the
+// Onewire::address variable. If there are no devices, no further
+// devices, or something horrible happens in the middle of the
+// enumeration then a 0 is returned.  If a new device is found then
+// its address is copied to newAddr.  Use Onewire::reset_search() to
+// start over.
+//
+// --- Replaced by the one from the Dallas Semiconductor web site ---
+//--------------------------------------------------------------------------
+// Perform the 1-Wire Search Algorithm on the 1-Wire bus using the existing
+// search state.
+// Return TRUE  : device found, ROM number in ROM_NO buffer
+//        FALSE : device not found, end of search
+//
+uint8_t Onewire::search(uint8_t *newAddr)
+{
+   uint8_t id_bit_number;
+   uint8_t last_zero, rom_byte_number, search_result;
+   uint8_t id_bit, cmp_id_bit;
+
+   unsigned char rom_byte_mask, search_direction;
+
+   // initialize for search
+   id_bit_number = 1;
+   last_zero = 0;
+   rom_byte_number = 0;
+   rom_byte_mask = 1;
+   search_result = 0;
+
+   // if the last call was not the last one
+   if (!_search_LastDeviceFlag)
+   {
+      // 1-Wire reset
+      if (!init())
+      {
+         // reset the search
+         _search_LastDiscrepancy = 0;
+         _search_LastDeviceFlag = false;
+         _search_LastFamilyDiscrepancy = 0;
+         return false;
+      }
+
+      // issue the search command
+      writeByte(0xF0);
+
+      // loop to do the search
+      do
+      {
+         // read a bit and its complement
+         id_bit = readBit();
+         cmp_id_bit = readBit();
+
+         // check for no devices on 1-wire
+         if ((id_bit == 1) && (cmp_id_bit == 1))
+            break;
+         else
+         {
+            // all devices coupled have 0 or 1
+            if (id_bit != cmp_id_bit)
+               search_direction = id_bit;  // bit write value for search
+            else
+            {
+               // if this discrepancy if before the Last Discrepancy
+               // on a previous next then pick the same as last time
+               if (id_bit_number < _search_LastDiscrepancy)
+                  search_direction = ((_search_ROM_NO[rom_byte_number] & rom_byte_mask) > 0);
+               else
+                  // if equal to last pick 1, if not then pick 0
+                  search_direction = (id_bit_number == _search_LastDiscrepancy);
+
+               // if 0 was picked then record its position in LastZero
+               if (search_direction == 0)
+               {
+                  last_zero = id_bit_number;
+
+                  // check for Last discrepancy in family
+                  if (last_zero < 9)
+                     _search_LastFamilyDiscrepancy = last_zero;
+               }
+            }
+
+            // set or clear the bit in the ROM byte rom_byte_number
+            // with mask rom_byte_mask
+            if (search_direction == 1)
+              _search_ROM_NO[rom_byte_number] |= rom_byte_mask;
+            else
+              _search_ROM_NO[rom_byte_number] &= ~rom_byte_mask;
+
+            // serial number search direction write bit
+            writeBit(search_direction);
+
+            // increment the byte counter id_bit_number
+            // and shift the mask rom_byte_mask
+            id_bit_number++;
+            rom_byte_mask <<= 1;
+
+            // if the mask is 0 then go to new SerialNum byte rom_byte_number and reset mask
+            if (rom_byte_mask == 0)
+            {
+                rom_byte_number++;
+                rom_byte_mask = 1;
+            }
+         }
+      }
+      while(rom_byte_number < 8);  // loop until through all ROM bytes 0-7
+
+      // if the search was successful then
+      if (!(id_bit_number < 65))
+      {
+         // search successful so set LastDiscrepancy,LastDeviceFlag,search_result
+         _search_LastDiscrepancy = last_zero;
+
+         // check for last device
+         if (_search_LastDiscrepancy == 0)
+            _search_LastDeviceFlag = true;
+
+         search_result = true;
+      }
+   }
+
+   // if no device found then reset counters so next 'search' will be like a first
+   if (!search_result || !_search_ROM_NO[0])
+   {
+      _search_LastDiscrepancy = 0;
+      _search_LastDeviceFlag = false;
+      _search_LastFamilyDiscrepancy = 0;
+      search_result = false;
+   }
+   for (int i = 0; i < 8; i++)
+       newAddr[i] = _search_ROM_NO[i];
+   return search_result;
+  }
+