Fork of Smoothie to port to mbed non-LPC targets.
Fork of Smoothie by
Diff: libs/LPC17xx/LPC17xxLib/src/lpc17xx_debug_frmwrk.c
- Revision:
- 3:f151d08d335c
- Parent:
- 2:1df0b61d3b5a
--- a/libs/LPC17xx/LPC17xxLib/src/lpc17xx_debug_frmwrk.c Fri Feb 28 18:52:52 2014 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,319 +0,0 @@ -#ifdef __LPC17XX__ - -/********************************************************************** -* $Id$ debug_frmwrk.c 2010-05-21 -*//** -* @file debug_frmwrk.c -* @brief Contains some utilities that used for debugging through UART -* @version 2.0 -* @date 21. May. 2010 -* @author NXP MCU SW Application Team -* -* Copyright(C) 2010, NXP Semiconductor -* All rights reserved. -* -*********************************************************************** -* Software that is described herein is for illustrative purposes only -* which provides customers with programming information regarding the -* products. This software is supplied "AS IS" without any warranties. -* NXP Semiconductors assumes no responsibility or liability for the -* use of the software, conveys no license or title under any patent, -* copyright, or mask work right to the product. NXP Semiconductors -* reserves the right to make changes in the software without -* notification. NXP Semiconductors also make no representation or -* warranty that such application will be suitable for the specified -* use without further testing or modification. -**********************************************************************/ - -#include "debug_frmwrk.h" -#include "lpc17xx_pinsel.h" - -/* If this source file built with example, the LPC17xx FW library configuration - * file in each example directory ("lpc17xx_libcfg.h") must be included, - * otherwise the default FW library configuration file must be included instead - */ -#ifdef __BUILD_WITH_EXAMPLE__ -#include "lpc17xx_libcfg.h" -#else -#include "lpc17xx_libcfg_default.h" -#endif /* __BUILD_WITH_EXAMPLE__ */ - -#ifdef _DBGFWK -/* Debug framework */ - -void (*_db_msg)(LPC_UART_TypeDef *UARTx, const void *s); -void (*_db_msg_)(LPC_UART_TypeDef *UARTx, const void *s); -void (*_db_char)(LPC_UART_TypeDef *UARTx, uint8_t ch); -void (*_db_dec)(LPC_UART_TypeDef *UARTx, uint8_t decn); -void (*_db_dec_16)(LPC_UART_TypeDef *UARTx, uint16_t decn); -void (*_db_dec_32)(LPC_UART_TypeDef *UARTx, uint32_t decn); -void (*_db_hex)(LPC_UART_TypeDef *UARTx, uint8_t hexn); -void (*_db_hex_16)(LPC_UART_TypeDef *UARTx, uint16_t hexn); -void (*_db_hex_32)(LPC_UART_TypeDef *UARTx, uint32_t hexn); -uint8_t (*_db_get_char)(LPC_UART_TypeDef *UARTx); - - -/*********************************************************************//** - * @brief Puts a character to UART port - * @param[in] UARTx Pointer to UART peripheral - * @param[in] ch Character to put - * @return None - **********************************************************************/ -void UARTPutChar (LPC_UART_TypeDef *UARTx, uint8_t ch) -{ - UART_Send(UARTx, &ch, 1, BLOCKING); -} - - -/*********************************************************************//** - * @brief Get a character to UART port - * @param[in] UARTx Pointer to UART peripheral - * @return character value that returned - **********************************************************************/ -uint8_t UARTGetChar (LPC_UART_TypeDef *UARTx) -{ - uint8_t tmp = 0; - UART_Receive(UARTx, &tmp, 1, BLOCKING); - return(tmp); -} - - -/*********************************************************************//** - * @brief Puts a string to UART port - * @param[in] UARTx Pointer to UART peripheral - * @param[in] str string to put - * @return None - **********************************************************************/ -void UARTPuts(LPC_UART_TypeDef *UARTx, const void *str) -{ - const uint8_t *s = (const uint8_t *) str; - - while (*s) - { - UARTPutChar(UARTx, *s++); - } -} - - -/*********************************************************************//** - * @brief Puts a string to UART port and print new line - * @param[in] UARTx Pointer to UART peripheral - * @param[in] str String to put - * @return None - **********************************************************************/ -void UARTPuts_(LPC_UART_TypeDef *UARTx, const void *str) -{ - UARTPuts (UARTx, str); - UARTPuts (UARTx, "\n\r"); -} - - -/*********************************************************************//** - * @brief Puts a decimal number to UART port - * @param[in] UARTx Pointer to UART peripheral - * @param[in] decnum Decimal number (8-bit long) - * @return None - **********************************************************************/ -void UARTPutDec(LPC_UART_TypeDef *UARTx, uint8_t decnum) -{ - uint8_t c1=decnum%10; - uint8_t c2=(decnum/10)%10; - uint8_t c3=(decnum/100)%10; - UARTPutChar(UARTx, '0'+c3); - UARTPutChar(UARTx, '0'+c2); - UARTPutChar(UARTx, '0'+c1); -} - -/*********************************************************************//** - * @brief Puts a decimal number to UART port - * @param[in] UARTx Pointer to UART peripheral - * @param[in] decnum Decimal number (8-bit long) - * @return None - **********************************************************************/ -void UARTPutDec16(LPC_UART_TypeDef *UARTx, uint16_t decnum) -{ - uint8_t c1=decnum%10; - uint8_t c2=(decnum/10)%10; - uint8_t c3=(decnum/100)%10; - uint8_t c4=(decnum/1000)%10; - uint8_t c5=(decnum/10000)%10; - UARTPutChar(UARTx, '0'+c5); - UARTPutChar(UARTx, '0'+c4); - UARTPutChar(UARTx, '0'+c3); - UARTPutChar(UARTx, '0'+c2); - UARTPutChar(UARTx, '0'+c1); -} - -/*********************************************************************//** - * @brief Puts a decimal number to UART port - * @param[in] UARTx Pointer to UART peripheral - * @param[in] decnum Decimal number (8-bit long) - * @return None - **********************************************************************/ -void UARTPutDec32(LPC_UART_TypeDef *UARTx, uint32_t decnum) -{ - uint8_t c1=decnum%10; - uint8_t c2=(decnum/10)%10; - uint8_t c3=(decnum/100)%10; - uint8_t c4=(decnum/1000)%10; - uint8_t c5=(decnum/10000)%10; - uint8_t c6=(decnum/100000)%10; - uint8_t c7=(decnum/1000000)%10; - uint8_t c8=(decnum/10000000)%10; - uint8_t c9=(decnum/100000000)%10; - uint8_t c10=(decnum/1000000000)%10; - UARTPutChar(UARTx, '0'+c10); - UARTPutChar(UARTx, '0'+c9); - UARTPutChar(UARTx, '0'+c8); - UARTPutChar(UARTx, '0'+c7); - UARTPutChar(UARTx, '0'+c6); - UARTPutChar(UARTx, '0'+c5); - UARTPutChar(UARTx, '0'+c4); - UARTPutChar(UARTx, '0'+c3); - UARTPutChar(UARTx, '0'+c2); - UARTPutChar(UARTx, '0'+c1); -} - -/*********************************************************************//** - * @brief Puts a hex number to UART port - * @param[in] UARTx Pointer to UART peripheral - * @param[in] hexnum Hex number (8-bit long) - * @return None - **********************************************************************/ -void UARTPutHex (LPC_UART_TypeDef *UARTx, uint8_t hexnum) -{ - uint8_t nibble, i; - - UARTPuts(UARTx, "0x"); - i = 1; - do { - nibble = (hexnum >> (4*i)) & 0x0F; - UARTPutChar(UARTx, (nibble > 9) ? ('A' + nibble - 10) : ('0' + nibble)); - } while (i--); -} - - -/*********************************************************************//** - * @brief Puts a hex number to UART port - * @param[in] UARTx Pointer to UART peripheral - * @param[in] hexnum Hex number (16-bit long) - * @return None - **********************************************************************/ -void UARTPutHex16 (LPC_UART_TypeDef *UARTx, uint16_t hexnum) -{ - uint8_t nibble, i; - - UARTPuts(UARTx, "0x"); - i = 3; - do { - nibble = (hexnum >> (4*i)) & 0x0F; - UARTPutChar(UARTx, (nibble > 9) ? ('A' + nibble - 10) : ('0' + nibble)); - } while (i--); -} - -/*********************************************************************//** - * @brief Puts a hex number to UART port - * @param[in] UARTx Pointer to UART peripheral - * @param[in] hexnum Hex number (32-bit long) - * @return None - **********************************************************************/ -void UARTPutHex32 (LPC_UART_TypeDef *UARTx, uint32_t hexnum) -{ - uint8_t nibble, i; - - UARTPuts(UARTx, "0x"); - i = 7; - do { - nibble = (hexnum >> (4*i)) & 0x0F; - UARTPutChar(UARTx, (nibble > 9) ? ('A' + nibble - 10) : ('0' + nibble)); - } while (i--); -} - -///*********************************************************************//** -// * @brief print function that supports format as same as printf() -// * function of <stdio.h> library -// * @param[in] None -// * @return None -// **********************************************************************/ -//void _printf (const char *format, ...) -//{ -// static char buffer[512 + 1]; -// va_list vArgs; -// char *tmp; -// va_start(vArgs, format); -// vsprintf((char *)buffer, (char const *)format, vArgs); -// va_end(vArgs); -// -// _DBG(buffer); -//} - -/*********************************************************************//** - * @brief Initialize Debug frame work through initializing UART port - * @param[in] None - * @return None - **********************************************************************/ -void debug_frmwrk_init(void) -{ - UART_CFG_Type UARTConfigStruct; - PINSEL_CFG_Type PinCfg; - -#if (USED_UART_DEBUG_PORT==0) - /* - * Initialize UART0 pin connect - */ - PinCfg.Funcnum = 1; - PinCfg.OpenDrain = 0; - PinCfg.Pinmode = 0; - PinCfg.Pinnum = 2; - PinCfg.Portnum = 0; - PINSEL_ConfigPin(&PinCfg); - PinCfg.Pinnum = 3; - PINSEL_ConfigPin(&PinCfg); - -#elif (USED_UART_DEBUG_PORT==1) - /* - * Initialize UART1 pin connect - */ - PinCfg.Funcnum = 1; - PinCfg.OpenDrain = 0; - PinCfg.Pinmode = 0; - PinCfg.Pinnum = 15; - PinCfg.Portnum = 0; - PINSEL_ConfigPin(&PinCfg); - PinCfg.Pinnum = 16; - PINSEL_ConfigPin(&PinCfg); -#endif - - /* Initialize UART Configuration parameter structure to default state: - * Baudrate = 9600bps - * 8 data bit - * 1 Stop bit - * None parity - */ - UART_ConfigStructInit(&UARTConfigStruct); - - // Re-configure baudrate to 115200bps - UARTConfigStruct.Baud_rate = 115200; - - // Initialize DEBUG_UART_PORT peripheral with given to corresponding parameter - UART_Init((LPC_UART_TypeDef *) DEBUG_UART_PORT, &UARTConfigStruct); - - // Enable UART Transmit - UART_TxCmd((LPC_UART_TypeDef *) DEBUG_UART_PORT, ENABLE); - - _db_msg = UARTPuts; - _db_msg_ = UARTPuts_; - _db_char = UARTPutChar; - _db_hex = UARTPutHex; - _db_hex_16 = UARTPutHex16; - _db_hex_32 = UARTPutHex32; - _db_dec = UARTPutDec; - _db_dec_16 = UARTPutDec16; - _db_dec_32 = UARTPutDec32; - _db_get_char = UARTGetChar; -} -#endif /*_DBGFWK */ - - -/* --------------------------------- End Of File ------------------------------ */ -#endif /* __LPC17XX__ */