Fork of Smoothie to port to mbed non-LPC targets.
Fork of Smoothie by
Diff: libs/LPC17xx/LPC17xxLib/inc/lpc17xx_emac.h
- Revision:
- 3:f151d08d335c
- Parent:
- 2:1df0b61d3b5a
--- a/libs/LPC17xx/LPC17xxLib/inc/lpc17xx_emac.h Fri Feb 28 18:52:52 2014 -0800 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,705 +0,0 @@ -/********************************************************************** -* $Id$ lpc17xx_emac.h 2010-05-21 -*//** -* @file lpc17xx_emac.h -* @brief Contains all macro definitions and function prototypes -* support for Ethernet MAC firmware library on LPC17xx -* @version 2.0 -* @date 21. May. 2010 -* @author NXP MCU SW Application Team -* -* Copyright(C) 2010, NXP Semiconductor -* All rights reserved. -* -*********************************************************************** -* Software that is described herein is for illustrative purposes only -* which provides customers with programming information regarding the -* products. This software is supplied "AS IS" without any warranties. -* NXP Semiconductors assumes no responsibility or liability for the -* use of the software, conveys no license or title under any patent, -* copyright, or mask work right to the product. NXP Semiconductors -* reserves the right to make changes in the software without -* notification. NXP Semiconductors also make no representation or -* warranty that such application will be suitable for the specified -* use without further testing or modification. -**********************************************************************/ - -/* Peripheral group ----------------------------------------------------------- */ -/** @defgroup EMAC EMAC (Ethernet Media Access Controller) - * @ingroup LPC1700CMSIS_FwLib_Drivers - * @{ - */ - -#ifndef LPC17XX_EMAC_H_ -#define LPC17XX_EMAC_H_ - -/* Includes ------------------------------------------------------------------- */ -#include "LPC17xx.h" -#include "lpc_types.h" - - -#ifdef __cplusplus -extern "C" -{ -#endif - -#define MCB_LPC_1768 -//#define IAR_LPC_1768 - -/* Public Macros -------------------------------------------------------------- */ -/** @defgroup EMAC_Public_Macros EMAC Public Macros - * @{ - */ - - -/* EMAC PHY status type definitions */ -#define EMAC_PHY_STAT_LINK (0) /**< Link Status */ -#define EMAC_PHY_STAT_SPEED (1) /**< Speed Status */ -#define EMAC_PHY_STAT_DUP (2) /**< Duplex Status */ - -/* EMAC PHY device Speed definitions */ -#define EMAC_MODE_AUTO (0) /**< Auto-negotiation mode */ -#define EMAC_MODE_10M_FULL (1) /**< 10Mbps FullDuplex mode */ -#define EMAC_MODE_10M_HALF (2) /**< 10Mbps HalfDuplex mode */ -#define EMAC_MODE_100M_FULL (3) /**< 100Mbps FullDuplex mode */ -#define EMAC_MODE_100M_HALF (4) /**< 100Mbps HalfDuplex mode */ - -/** - * @} - */ -/* Private Macros ------------------------------------------------------------- */ -/** @defgroup EMAC_Private_Macros EMAC Private Macros - * @{ - */ - - -/* EMAC Memory Buffer configuration for 16K Ethernet RAM */ -#define EMAC_NUM_RX_FRAG 4 /**< Num.of RX Fragments 4*1536= 6.0kB */ -#define EMAC_NUM_TX_FRAG 3 /**< Num.of TX Fragments 3*1536= 4.6kB */ -#define EMAC_ETH_MAX_FLEN 1536 /**< Max. Ethernet Frame Size */ -#define EMAC_TX_FRAME_TOUT 0x00100000 /**< Frame Transmit timeout count */ - -/* --------------------- BIT DEFINITIONS -------------------------------------- */ -/*********************************************************************//** - * Macro defines for MAC Configuration Register 1 - **********************************************************************/ -#define EMAC_MAC1_REC_EN 0x00000001 /**< Receive Enable */ -#define EMAC_MAC1_PASS_ALL 0x00000002 /**< Pass All Receive Frames */ -#define EMAC_MAC1_RX_FLOWC 0x00000004 /**< RX Flow Control */ -#define EMAC_MAC1_TX_FLOWC 0x00000008 /**< TX Flow Control */ -#define EMAC_MAC1_LOOPB 0x00000010 /**< Loop Back Mode */ -#define EMAC_MAC1_RES_TX 0x00000100 /**< Reset TX Logic */ -#define EMAC_MAC1_RES_MCS_TX 0x00000200 /**< Reset MAC TX Control Sublayer */ -#define EMAC_MAC1_RES_RX 0x00000400 /**< Reset RX Logic */ -#define EMAC_MAC1_RES_MCS_RX 0x00000800 /**< Reset MAC RX Control Sublayer */ -#define EMAC_MAC1_SIM_RES 0x00004000 /**< Simulation Reset */ -#define EMAC_MAC1_SOFT_RES 0x00008000 /**< Soft Reset MAC */ - -/*********************************************************************//** - * Macro defines for MAC Configuration Register 2 - **********************************************************************/ -#define EMAC_MAC2_FULL_DUP 0x00000001 /**< Full-Duplex Mode */ -#define EMAC_MAC2_FRM_LEN_CHK 0x00000002 /**< Frame Length Checking */ -#define EMAC_MAC2_HUGE_FRM_EN 0x00000004 /**< Huge Frame Enable */ -#define EMAC_MAC2_DLY_CRC 0x00000008 /**< Delayed CRC Mode */ -#define EMAC_MAC2_CRC_EN 0x00000010 /**< Append CRC to every Frame */ -#define EMAC_MAC2_PAD_EN 0x00000020 /**< Pad all Short Frames */ -#define EMAC_MAC2_VLAN_PAD_EN 0x00000040 /**< VLAN Pad Enable */ -#define EMAC_MAC2_ADET_PAD_EN 0x00000080 /**< Auto Detect Pad Enable */ -#define EMAC_MAC2_PPREAM_ENF 0x00000100 /**< Pure Preamble Enforcement */ -#define EMAC_MAC2_LPREAM_ENF 0x00000200 /**< Long Preamble Enforcement */ -#define EMAC_MAC2_NO_BACKOFF 0x00001000 /**< No Backoff Algorithm */ -#define EMAC_MAC2_BACK_PRESSURE 0x00002000 /**< Backoff Presurre / No Backoff */ -#define EMAC_MAC2_EXCESS_DEF 0x00004000 /**< Excess Defer */ - -/*********************************************************************//** - * Macro defines for Back-to-Back Inter-Packet-Gap Register - **********************************************************************/ -/** Programmable field representing the nibble time offset of the minimum possible period - * between the end of any transmitted packet to the beginning of the next */ -#define EMAC_IPGT_BBIPG(n) (n&0x7F) -/** Recommended value for Full Duplex of Programmable field representing the nibble time - * offset of the minimum possible period between the end of any transmitted packet to the - * beginning of the next */ -#define EMAC_IPGT_FULL_DUP (EMAC_IPGT_BBIPG(0x15)) -/** Recommended value for Half Duplex of Programmable field representing the nibble time - * offset of the minimum possible period between the end of any transmitted packet to the - * beginning of the next */ -#define EMAC_IPGT_HALF_DUP (EMAC_IPGT_BBIPG(0x12)) - -/*********************************************************************//** - * Macro defines for Non Back-to-Back Inter-Packet-Gap Register - **********************************************************************/ -/** Programmable field representing the Non-Back-to-Back Inter-Packet-Gap */ -#define EMAC_IPGR_NBBIPG_P2(n) (n&0x7F) -/** Recommended value for Programmable field representing the Non-Back-to-Back Inter-Packet-Gap Part 1 */ -#define EMAC_IPGR_P2_DEF (EMAC_IPGR_NBBIPG_P2(0x12)) -/** Programmable field representing the optional carrierSense window referenced in - * IEEE 802.3/4.2.3.2.1 'Carrier Deference' */ -#define EMAC_IPGR_NBBIPG_P1(n) ((n&0x7F)<<8) -/** Recommended value for Programmable field representing the Non-Back-to-Back Inter-Packet-Gap Part 2 */ -#define EMAC_IPGR_P1_DEF EMAC_IPGR_NBBIPG_P1(0x0C) - -/*********************************************************************//** - * Macro defines for Collision Window/Retry Register - **********************************************************************/ -/** Programmable field specifying the number of retransmission attempts following a collision before - * aborting the packet due to excessive collisions */ -#define EMAC_CLRT_MAX_RETX(n) (n&0x0F) -/** Programmable field representing the slot time or collision window during which collisions occur - * in properly configured networks */ -#define EMAC_CLRT_COLL(n) ((n&0x3F)<<8) -/** Default value for Collision Window / Retry register */ -#define EMAC_CLRT_DEF ((EMAC_CLRT_MAX_RETX(0x0F))|(EMAC_CLRT_COLL(0x37))) - -/*********************************************************************//** - * Macro defines for Maximum Frame Register - **********************************************************************/ -/** Represents a maximum receive frame of 1536 octets */ -#define EMAC_MAXF_MAXFRMLEN(n) (n&0xFFFF) - -/*********************************************************************//** - * Macro defines for PHY Support Register - **********************************************************************/ -#define EMAC_SUPP_SPEED 0x00000100 /**< Reduced MII Logic Current Speed */ -#define EMAC_SUPP_RES_RMII 0x00000800 /**< Reset Reduced MII Logic */ - -/*********************************************************************//** - * Macro defines for Test Register - **********************************************************************/ -#define EMAC_TEST_SHCUT_PQUANTA 0x00000001 /**< Shortcut Pause Quanta */ -#define EMAC_TEST_TST_PAUSE 0x00000002 /**< Test Pause */ -#define EMAC_TEST_TST_BACKP 0x00000004 /**< Test Back Pressure */ - -/*********************************************************************//** - * Macro defines for MII Management Configuration Register - **********************************************************************/ -#define EMAC_MCFG_SCAN_INC 0x00000001 /**< Scan Increment PHY Address */ -#define EMAC_MCFG_SUPP_PREAM 0x00000002 /**< Suppress Preamble */ -#define EMAC_MCFG_CLK_SEL(n) ((n&0x0F)<<2) /**< Clock Select Field */ -#define EMAC_MCFG_RES_MII 0x00008000 /**< Reset MII Management Hardware */ -#define EMAC_MCFG_MII_MAXCLK 2500000UL /**< MII Clock max */ - -/*********************************************************************//** - * Macro defines for MII Management Command Register - **********************************************************************/ -#define EMAC_MCMD_READ 0x00000001 /**< MII Read */ -#define EMAC_MCMD_SCAN 0x00000002 /**< MII Scan continuously */ - -#define EMAC_MII_WR_TOUT 0x00050000 /**< MII Write timeout count */ -#define EMAC_MII_RD_TOUT 0x00050000 /**< MII Read timeout count */ - -/*********************************************************************//** - * Macro defines for MII Management Address Register - **********************************************************************/ -#define EMAC_MADR_REG_ADR(n) (n&0x1F) /**< MII Register Address field */ -#define EMAC_MADR_PHY_ADR(n) ((n&0x1F)<<8) /**< PHY Address Field */ - -/*********************************************************************//** - * Macro defines for MII Management Write Data Register - **********************************************************************/ -#define EMAC_MWTD_DATA(n) (n&0xFFFF) /**< Data field for MMI Management Write Data register */ - -/*********************************************************************//** - * Macro defines for MII Management Read Data Register - **********************************************************************/ -#define EMAC_MRDD_DATA(n) (n&0xFFFF) /**< Data field for MMI Management Read Data register */ - -/*********************************************************************//** - * Macro defines for MII Management Indicators Register - **********************************************************************/ -#define EMAC_MIND_BUSY 0x00000001 /**< MII is Busy */ -#define EMAC_MIND_SCAN 0x00000002 /**< MII Scanning in Progress */ -#define EMAC_MIND_NOT_VAL 0x00000004 /**< MII Read Data not valid */ -#define EMAC_MIND_MII_LINK_FAIL 0x00000008 /**< MII Link Failed */ - -/* Station Address 0 Register */ -/* Station Address 1 Register */ -/* Station Address 2 Register */ - - -/* Control register definitions --------------------------------------------------------------------------- */ -/*********************************************************************//** - * Macro defines for Command Register - **********************************************************************/ -#define EMAC_CR_RX_EN 0x00000001 /**< Enable Receive */ -#define EMAC_CR_TX_EN 0x00000002 /**< Enable Transmit */ -#define EMAC_CR_REG_RES 0x00000008 /**< Reset Host Registers */ -#define EMAC_CR_TX_RES 0x00000010 /**< Reset Transmit Datapath */ -#define EMAC_CR_RX_RES 0x00000020 /**< Reset Receive Datapath */ -#define EMAC_CR_PASS_RUNT_FRM 0x00000040 /**< Pass Runt Frames */ -#define EMAC_CR_PASS_RX_FILT 0x00000080 /**< Pass RX Filter */ -#define EMAC_CR_TX_FLOW_CTRL 0x00000100 /**< TX Flow Control */ -#define EMAC_CR_RMII 0x00000200 /**< Reduced MII Interface */ -#define EMAC_CR_FULL_DUP 0x00000400 /**< Full Duplex */ - -/*********************************************************************//** - * Macro defines for Status Register - **********************************************************************/ -#define EMAC_SR_RX_EN 0x00000001 /**< Enable Receive */ -#define EMAC_SR_TX_EN 0x00000002 /**< Enable Transmit */ - -/*********************************************************************//** - * Macro defines for Transmit Status Vector 0 Register - **********************************************************************/ -#define EMAC_TSV0_CRC_ERR 0x00000001 /**< CRC error */ -#define EMAC_TSV0_LEN_CHKERR 0x00000002 /**< Length Check Error */ -#define EMAC_TSV0_LEN_OUTRNG 0x00000004 /**< Length Out of Range */ -#define EMAC_TSV0_DONE 0x00000008 /**< Tramsmission Completed */ -#define EMAC_TSV0_MCAST 0x00000010 /**< Multicast Destination */ -#define EMAC_TSV0_BCAST 0x00000020 /**< Broadcast Destination */ -#define EMAC_TSV0_PKT_DEFER 0x00000040 /**< Packet Deferred */ -#define EMAC_TSV0_EXC_DEFER 0x00000080 /**< Excessive Packet Deferral */ -#define EMAC_TSV0_EXC_COLL 0x00000100 /**< Excessive Collision */ -#define EMAC_TSV0_LATE_COLL 0x00000200 /**< Late Collision Occured */ -#define EMAC_TSV0_GIANT 0x00000400 /**< Giant Frame */ -#define EMAC_TSV0_UNDERRUN 0x00000800 /**< Buffer Underrun */ -#define EMAC_TSV0_BYTES 0x0FFFF000 /**< Total Bytes Transferred */ -#define EMAC_TSV0_CTRL_FRAME 0x10000000 /**< Control Frame */ -#define EMAC_TSV0_PAUSE 0x20000000 /**< Pause Frame */ -#define EMAC_TSV0_BACK_PRESS 0x40000000 /**< Backpressure Method Applied */ -#define EMAC_TSV0_VLAN 0x80000000 /**< VLAN Frame */ - -/*********************************************************************//** - * Macro defines for Transmit Status Vector 1 Register - **********************************************************************/ -#define EMAC_TSV1_BYTE_CNT 0x0000FFFF /**< Transmit Byte Count */ -#define EMAC_TSV1_COLL_CNT 0x000F0000 /**< Transmit Collision Count */ - -/*********************************************************************//** - * Macro defines for Receive Status Vector Register - **********************************************************************/ -#define EMAC_RSV_BYTE_CNT 0x0000FFFF /**< Receive Byte Count */ -#define EMAC_RSV_PKT_IGNORED 0x00010000 /**< Packet Previously Ignored */ -#define EMAC_RSV_RXDV_SEEN 0x00020000 /**< RXDV Event Previously Seen */ -#define EMAC_RSV_CARR_SEEN 0x00040000 /**< Carrier Event Previously Seen */ -#define EMAC_RSV_REC_CODEV 0x00080000 /**< Receive Code Violation */ -#define EMAC_RSV_CRC_ERR 0x00100000 /**< CRC Error */ -#define EMAC_RSV_LEN_CHKERR 0x00200000 /**< Length Check Error */ -#define EMAC_RSV_LEN_OUTRNG 0x00400000 /**< Length Out of Range */ -#define EMAC_RSV_REC_OK 0x00800000 /**< Frame Received OK */ -#define EMAC_RSV_MCAST 0x01000000 /**< Multicast Frame */ -#define EMAC_RSV_BCAST 0x02000000 /**< Broadcast Frame */ -#define EMAC_RSV_DRIB_NIBB 0x04000000 /**< Dribble Nibble */ -#define EMAC_RSV_CTRL_FRAME 0x08000000 /**< Control Frame */ -#define EMAC_RSV_PAUSE 0x10000000 /**< Pause Frame */ -#define EMAC_RSV_UNSUPP_OPC 0x20000000 /**< Unsupported Opcode */ -#define EMAC_RSV_VLAN 0x40000000 /**< VLAN Frame */ - -/*********************************************************************//** - * Macro defines for Flow Control Counter Register - **********************************************************************/ -#define EMAC_FCC_MIRR_CNT(n) (n&0xFFFF) /**< Mirror Counter */ -#define EMAC_FCC_PAUSE_TIM(n) ((n&0xFFFF)<<16) /**< Pause Timer */ - -/*********************************************************************//** - * Macro defines for Flow Control Status Register - **********************************************************************/ -#define EMAC_FCS_MIRR_CNT(n) (n&0xFFFF) /**< Mirror Counter Current */ - - -/* Receive filter register definitions -------------------------------------------------------- */ -/*********************************************************************//** - * Macro defines for Receive Filter Control Register - **********************************************************************/ -#define EMAC_RFC_UCAST_EN 0x00000001 /**< Accept Unicast Frames Enable */ -#define EMAC_RFC_BCAST_EN 0x00000002 /**< Accept Broadcast Frames Enable */ -#define EMAC_RFC_MCAST_EN 0x00000004 /**< Accept Multicast Frames Enable */ -#define EMAC_RFC_UCAST_HASH_EN 0x00000008 /**< Accept Unicast Hash Filter Frames */ -#define EMAC_RFC_MCAST_HASH_EN 0x00000010 /**< Accept Multicast Hash Filter Fram.*/ -#define EMAC_RFC_PERFECT_EN 0x00000020 /**< Accept Perfect Match Enable */ -#define EMAC_RFC_MAGP_WOL_EN 0x00001000 /**< Magic Packet Filter WoL Enable */ -#define EMAC_RFC_PFILT_WOL_EN 0x00002000 /**< Perfect Filter WoL Enable */ - -/*********************************************************************//** - * Macro defines for Receive Filter WoL Status/Clear Registers - **********************************************************************/ -#define EMAC_WOL_UCAST 0x00000001 /**< Unicast Frame caused WoL */ -#define EMAC_WOL_BCAST 0x00000002 /**< Broadcast Frame caused WoL */ -#define EMAC_WOL_MCAST 0x00000004 /**< Multicast Frame caused WoL */ -#define EMAC_WOL_UCAST_HASH 0x00000008 /**< Unicast Hash Filter Frame WoL */ -#define EMAC_WOL_MCAST_HASH 0x00000010 /**< Multicast Hash Filter Frame WoL */ -#define EMAC_WOL_PERFECT 0x00000020 /**< Perfect Filter WoL */ -#define EMAC_WOL_RX_FILTER 0x00000080 /**< RX Filter caused WoL */ -#define EMAC_WOL_MAG_PACKET 0x00000100 /**< Magic Packet Filter caused WoL */ -#define EMAC_WOL_BITMASK 0x01BF /**< Receive Filter WoL Status/Clear bitmasl value */ - - -/* Module control register definitions ---------------------------------------------------- */ -/*********************************************************************//** - * Macro defines for Interrupt Status/Enable/Clear/Set Registers - **********************************************************************/ -#define EMAC_INT_RX_OVERRUN 0x00000001 /**< Overrun Error in RX Queue */ -#define EMAC_INT_RX_ERR 0x00000002 /**< Receive Error */ -#define EMAC_INT_RX_FIN 0x00000004 /**< RX Finished Process Descriptors */ -#define EMAC_INT_RX_DONE 0x00000008 /**< Receive Done */ -#define EMAC_INT_TX_UNDERRUN 0x00000010 /**< Transmit Underrun */ -#define EMAC_INT_TX_ERR 0x00000020 /**< Transmit Error */ -#define EMAC_INT_TX_FIN 0x00000040 /**< TX Finished Process Descriptors */ -#define EMAC_INT_TX_DONE 0x00000080 /**< Transmit Done */ -#define EMAC_INT_SOFT_INT 0x00001000 /**< Software Triggered Interrupt */ -#define EMAC_INT_WAKEUP 0x00002000 /**< Wakeup Event Interrupt */ - -/*********************************************************************//** - * Macro defines for Power Down Register - **********************************************************************/ -#define EMAC_PD_POWER_DOWN 0x80000000 /**< Power Down MAC */ - -/* Descriptor and status formats ---------------------------------------------------- */ -/*********************************************************************//** - * Macro defines for RX Descriptor Control Word - **********************************************************************/ -#define EMAC_RCTRL_SIZE(n) (n&0x7FF) /**< Buffer size field */ -#define EMAC_RCTRL_INT 0x80000000 /**< Generate RxDone Interrupt */ - -/*********************************************************************//** - * Macro defines for RX Status Hash CRC Word - **********************************************************************/ -#define EMAC_RHASH_SA 0x000001FF /**< Hash CRC for Source Address */ -#define EMAC_RHASH_DA 0x001FF000 /**< Hash CRC for Destination Address */ - -/*********************************************************************//** - * Macro defines for RX Status Information Word - **********************************************************************/ -#define EMAC_RINFO_SIZE 0x000007FF /**< Data size in bytes */ -#define EMAC_RINFO_CTRL_FRAME 0x00040000 /**< Control Frame */ -#define EMAC_RINFO_VLAN 0x00080000 /**< VLAN Frame */ -#define EMAC_RINFO_FAIL_FILT 0x00100000 /**< RX Filter Failed */ -#define EMAC_RINFO_MCAST 0x00200000 /**< Multicast Frame */ -#define EMAC_RINFO_BCAST 0x00400000 /**< Broadcast Frame */ -#define EMAC_RINFO_CRC_ERR 0x00800000 /**< CRC Error in Frame */ -#define EMAC_RINFO_SYM_ERR 0x01000000 /**< Symbol Error from PHY */ -#define EMAC_RINFO_LEN_ERR 0x02000000 /**< Length Error */ -#define EMAC_RINFO_RANGE_ERR 0x04000000 /**< Range Error (exceeded max. size) */ -#define EMAC_RINFO_ALIGN_ERR 0x08000000 /**< Alignment Error */ -#define EMAC_RINFO_OVERRUN 0x10000000 /**< Receive overrun */ -#define EMAC_RINFO_NO_DESCR 0x20000000 /**< No new Descriptor available */ -#define EMAC_RINFO_LAST_FLAG 0x40000000 /**< Last Fragment in Frame */ -#define EMAC_RINFO_ERR 0x80000000 /**< Error Occured (OR of all errors) */ -#define EMAC_RINFO_ERR_MASK (EMAC_RINFO_FAIL_FILT | EMAC_RINFO_CRC_ERR | EMAC_RINFO_SYM_ERR | \ -EMAC_RINFO_LEN_ERR | EMAC_RINFO_ALIGN_ERR | EMAC_RINFO_OVERRUN) - -/*********************************************************************//** - * Macro defines for TX Descriptor Control Word - **********************************************************************/ -#define EMAC_TCTRL_SIZE 0x000007FF /**< Size of data buffer in bytes */ -#define EMAC_TCTRL_OVERRIDE 0x04000000 /**< Override Default MAC Registers */ -#define EMAC_TCTRL_HUGE 0x08000000 /**< Enable Huge Frame */ -#define EMAC_TCTRL_PAD 0x10000000 /**< Pad short Frames to 64 bytes */ -#define EMAC_TCTRL_CRC 0x20000000 /**< Append a hardware CRC to Frame */ -#define EMAC_TCTRL_LAST 0x40000000 /**< Last Descriptor for TX Frame */ -#define EMAC_TCTRL_INT 0x80000000 /**< Generate TxDone Interrupt */ - -/*********************************************************************//** - * Macro defines for TX Status Information Word - **********************************************************************/ -#define EMAC_TINFO_COL_CNT 0x01E00000 /**< Collision Count */ -#define EMAC_TINFO_DEFER 0x02000000 /**< Packet Deferred (not an error) */ -#define EMAC_TINFO_EXCESS_DEF 0x04000000 /**< Excessive Deferral */ -#define EMAC_TINFO_EXCESS_COL 0x08000000 /**< Excessive Collision */ -#define EMAC_TINFO_LATE_COL 0x10000000 /**< Late Collision Occured */ -#define EMAC_TINFO_UNDERRUN 0x20000000 /**< Transmit Underrun */ -#define EMAC_TINFO_NO_DESCR 0x40000000 /**< No new Descriptor available */ -#define EMAC_TINFO_ERR 0x80000000 /**< Error Occured (OR of all errors) */ - -#ifdef MCB_LPC_1768 -/* DP83848C PHY definition ------------------------------------------------------------ */ - -/** PHY device reset time out definition */ -#define EMAC_PHY_RESP_TOUT 0x100000UL - -/* ENET Device Revision ID */ -#define EMAC_OLD_EMAC_MODULE_ID 0x39022000 /**< Rev. ID for first rev '-' */ - -/*********************************************************************//** - * Macro defines for DP83848C PHY Registers - **********************************************************************/ -#define EMAC_PHY_REG_BMCR 0x00 /**< Basic Mode Control Register */ -#define EMAC_PHY_REG_BMSR 0x01 /**< Basic Mode Status Register */ -#define EMAC_PHY_REG_IDR1 0x02 /**< PHY Identifier 1 */ -#define EMAC_PHY_REG_IDR2 0x03 /**< PHY Identifier 2 */ -#define EMAC_PHY_REG_ANAR 0x04 /**< Auto-Negotiation Advertisement */ -#define EMAC_PHY_REG_ANLPAR 0x05 /**< Auto-Neg. Link Partner Abitily */ -#define EMAC_PHY_REG_ANER 0x06 /**< Auto-Neg. Expansion Register */ -#define EMAC_PHY_REG_ANNPTR 0x07 /**< Auto-Neg. Next Page TX */ -#define EMAC_PHY_REG_LPNPA 0x08 - -/*********************************************************************//** - * Macro defines for PHY Extended Registers - **********************************************************************/ -#define EMAC_PHY_REG_STS 0x10 /**< Status Register */ -#define EMAC_PHY_REG_MICR 0x11 /**< MII Interrupt Control Register */ -#define EMAC_PHY_REG_MISR 0x12 /**< MII Interrupt Status Register */ -#define EMAC_PHY_REG_FCSCR 0x14 /**< False Carrier Sense Counter */ -#define EMAC_PHY_REG_RECR 0x15 /**< Receive Error Counter */ -#define EMAC_PHY_REG_PCSR 0x16 /**< PCS Sublayer Config. and Status */ -#define EMAC_PHY_REG_RBR 0x17 /**< RMII and Bypass Register */ -#define EMAC_PHY_REG_LEDCR 0x18 /**< LED Direct Control Register */ -#define EMAC_PHY_REG_PHYCR 0x19 /**< PHY Control Register */ -#define EMAC_PHY_REG_10BTSCR 0x1A /**< 10Base-T Status/Control Register */ -#define EMAC_PHY_REG_CDCTRL1 0x1B /**< CD Test Control and BIST Extens. */ -#define EMAC_PHY_REG_EDCR 0x1D /**< Energy Detect Control Register */ - -/*********************************************************************//** - * Macro defines for PHY Basic Mode Control Register - **********************************************************************/ -#define EMAC_PHY_BMCR_RESET (1<<15) /**< Reset bit */ -#define EMAC_PHY_BMCR_LOOPBACK (1<<14) /**< Loop back */ -#define EMAC_PHY_BMCR_SPEED_SEL (1<<13) /**< Speed selection */ -#define EMAC_PHY_BMCR_AN (1<<12) /**< Auto Negotiation */ -#define EMAC_PHY_BMCR_POWERDOWN (1<<11) /**< Power down mode */ -#define EMAC_PHY_BMCR_ISOLATE (1<<10) /**< Isolate */ -#define EMAC_PHY_BMCR_RE_AN (1<<9) /**< Restart auto negotiation */ -#define EMAC_PHY_BMCR_DUPLEX (1<<8) /**< Duplex mode */ - -/*********************************************************************//** - * Macro defines for PHY Basic Mode Status Status Register - **********************************************************************/ -#define EMAC_PHY_BMSR_100BE_T4 (1<<15) /**< 100 base T4 */ -#define EMAC_PHY_BMSR_100TX_FULL (1<<14) /**< 100 base full duplex */ -#define EMAC_PHY_BMSR_100TX_HALF (1<<13) /**< 100 base half duplex */ -#define EMAC_PHY_BMSR_10BE_FULL (1<<12) /**< 10 base T full duplex */ -#define EMAC_PHY_BMSR_10BE_HALF (1<<11) /**< 10 base T half duplex */ -#define EMAC_PHY_BMSR_NOPREAM (1<<6) /**< MF Preamable Supress */ -#define EMAC_PHY_BMSR_AUTO_DONE (1<<5) /**< Auto negotiation complete */ -#define EMAC_PHY_BMSR_REMOTE_FAULT (1<<4) /**< Remote fault */ -#define EMAC_PHY_BMSR_NO_AUTO (1<<3) /**< Auto Negotiation ability */ -#define EMAC_PHY_BMSR_LINK_ESTABLISHED (1<<2) /**< Link status */ - -/*********************************************************************//** - * Macro defines for PHY Status Register - **********************************************************************/ -#define EMAC_PHY_SR_REMOTE_FAULT (1<<6) /**< Remote Fault */ -#define EMAC_PHY_SR_JABBER (1<<5) /**< Jabber detect */ -#define EMAC_PHY_SR_AUTO_DONE (1<<4) /**< Auto Negotiation complete */ -#define EMAC_PHY_SR_LOOPBACK (1<<3) /**< Loop back status */ -#define EMAC_PHY_SR_DUP (1<<2) /**< Duplex status */ -#define EMAC_PHY_SR_SPEED (1<<1) /**< Speed status */ -#define EMAC_PHY_SR_LINK (1<<0) /**< Link Status */ - -#define EMAC_PHY_FULLD_100M 0x2100 /**< Full Duplex 100Mbit */ -#define EMAC_PHY_HALFD_100M 0x2000 /**< Half Duplex 100Mbit */ -#define EMAC_PHY_FULLD_10M 0x0100 /**< Full Duplex 10Mbit */ -#define EMAC_PHY_HALFD_10M 0x0000 /**< Half Duplex 10MBit */ -#define EMAC_PHY_AUTO_NEG 0x3000 /**< Select Auto Negotiation */ - -#define EMAC_DEF_ADR 0x0100 /**< Default PHY device address */ -#define EMAC_DP83848C_ID 0x20005C90 /**< PHY Identifier */ - -#define EMAC_PHY_SR_100_SPEED ((1<<14)|(1<<13)) -#define EMAC_PHY_SR_FULL_DUP ((1<<14)|(1<<12)) -#define EMAC_PHY_BMSR_LINK_STATUS (1<<2) /**< Link status */ - -#elif defined(IAR_LPC_1768) -/* KSZ8721BL PHY definition ------------------------------------------------------------ */ -/** PHY device reset time out definition */ -#define EMAC_PHY_RESP_TOUT 0x100000UL - -/* ENET Device Revision ID */ -#define EMAC_OLD_EMAC_MODULE_ID 0x39022000 /**< Rev. ID for first rev '-' */ - -/*********************************************************************//** - * Macro defines for KSZ8721BL PHY Registers - **********************************************************************/ -#define EMAC_PHY_REG_BMCR 0x00 /**< Basic Mode Control Register */ -#define EMAC_PHY_REG_BMSR 0x01 /**< Basic Mode Status Register */ -#define EMAC_PHY_REG_IDR1 0x02 /**< PHY Identifier 1 */ -#define EMAC_PHY_REG_IDR2 0x03 /**< PHY Identifier 2 */ -#define EMAC_PHY_REG_ANAR 0x04 /**< Auto-Negotiation Advertisement */ -#define EMAC_PHY_REG_ANLPAR 0x05 /**< Auto-Neg. Link Partner Abitily */ -#define EMAC_PHY_REG_ANER 0x06 /**< Auto-Neg. Expansion Register */ -#define EMAC_PHY_REG_ANNPTR 0x07 /**< Auto-Neg. Next Page TX */ -#define EMAC_PHY_REG_LPNPA 0x08 /**< Link Partner Next Page Ability */ -#define EMAC_PHY_REG_REC 0x15 /**< RXError Counter Register */ -#define EMAC_PHY_REG_ISC 0x1b /**< Interrupt Control/Status Register */ -#define EMAC_PHY_REG_100BASE 0x1f /**< 100BASE-TX PHY Control Register */ - -/*********************************************************************//** - * Macro defines for PHY Basic Mode Control Register - **********************************************************************/ -#define EMAC_PHY_BMCR_RESET (1<<15) /**< Reset bit */ -#define EMAC_PHY_BMCR_LOOPBACK (1<<14) /**< Loop back */ -#define EMAC_PHY_BMCR_SPEED_SEL (1<<13) /**< Speed selection */ -#define EMAC_PHY_BMCR_AN (1<<12) /**< Auto Negotiation */ -#define EMAC_PHY_BMCR_POWERDOWN (1<<11) /**< Power down mode */ -#define EMAC_PHY_BMCR_ISOLATE (1<<10) /**< Isolate */ -#define EMAC_PHY_BMCR_RE_AN (1<<9) /**< Restart auto negotiation */ -#define EMAC_PHY_BMCR_DUPLEX (1<<8) /**< Duplex mode */ -#define EMAC_PHY_BMCR_COLLISION (1<<7) /**< Collision test */ -#define EMAC_PHY_BMCR_TXDIS (1<<0) /**< Disable transmit */ - -/*********************************************************************//** - * Macro defines for PHY Basic Mode Status Register - **********************************************************************/ -#define EMAC_PHY_BMSR_100BE_T4 (1<<15) /**< 100 base T4 */ -#define EMAC_PHY_BMSR_100TX_FULL (1<<14) /**< 100 base full duplex */ -#define EMAC_PHY_BMSR_100TX_HALF (1<<13) /**< 100 base half duplex */ -#define EMAC_PHY_BMSR_10BE_FULL (1<<12) /**< 10 base T full duplex */ -#define EMAC_PHY_BMSR_10BE_HALF (1<<11) /**< 10 base T half duplex */ -#define EMAC_PHY_BMSR_NOPREAM (1<<6) /**< MF Preamable Supress */ -#define EMAC_PHY_BMSR_AUTO_DONE (1<<5) /**< Auto negotiation complete */ -#define EMAC_PHY_BMSR_REMOTE_FAULT (1<<4) /**< Remote fault */ -#define EMAC_PHY_BMSR_NO_AUTO (1<<3) /**< Auto Negotiation ability */ -#define EMAC_PHY_BMSR_LINK_STATUS (1<<2) /**< Link status */ -#define EMAC_PHY_BMSR_JABBER_DETECT (1<<1) /**< Jabber detect */ -#define EMAC_PHY_BMSR_EXTEND (1<<0) /**< Extended support */ - -/*********************************************************************//** - * Macro defines for PHY Identifier - **********************************************************************/ -/* PHY Identifier 1 bitmap definitions */ -#define EMAC_PHY_IDR1(n) (n & 0xFFFF) /**< PHY ID1 Number */ - -/* PHY Identifier 2 bitmap definitions */ -#define EMAC_PHY_IDR2(n) (n & 0xFFFF) /**< PHY ID2 Number */ - -/*********************************************************************//** - * Macro defines for Auto-Negotiation Advertisement - **********************************************************************/ -#define EMAC_PHY_AN_NEXTPAGE (1<<15) /**< Next page capable */ -#define EMAC_PHY_AN_REMOTE_FAULT (1<<13) /**< Remote Fault support */ -#define EMAC_PHY_AN_PAUSE (1<<10) /**< Pause support */ -#define EMAC_PHY_AN_100BASE_T4 (1<<9) /**< T4 capable */ -#define EMAC_PHY_AN_100BASE_TX_FD (1<<8) /**< TX with Full-duplex capable */ -#define EMAC_PHY_AN_100BASE_TX (1<<7) /**< TX capable */ -#define EMAC_PHY_AN_10BASE_T_FD (1<<6) /**< 10Mbps with full-duplex capable */ -#define EMAC_PHY_AN_10BASE_T (1<<5) /**< 10Mbps capable */ -#define EMAC_PHY_AN_FIELD(n) (n & 0x1F) /**< Selector Field */ - -#define EMAC_PHY_FULLD_100M 0x2100 /**< Full Duplex 100Mbit */ -#define EMAC_PHY_HALFD_100M 0x2000 /**< Half Duplex 100Mbit */ -#define EMAC_PHY_FULLD_10M 0x0100 /**< Full Duplex 10Mbit */ -#define EMAC_PHY_HALFD_10M 0x0000 /**< Half Duplex 10MBit */ -#define EMAC_PHY_AUTO_NEG 0x3000 /**< Select Auto Negotiation */ - -#define EMAC_PHY_SR_100_SPEED ((1<<14)|(1<<13)) -#define EMAC_PHY_SR_FULL_DUP ((1<<14)|(1<<12)) - -#define EMAC_DEF_ADR (0x01<<8) /**< Default PHY device address */ -#define EMAC_KSZ8721BL_ID ((0x22 << 16) | 0x1619 ) /**< PHY Identifier */ -#endif - -/** - * @} - */ - - -/* Public Types --------------------------------------------------------------- */ -/** @defgroup EMAC_Public_Types EMAC Public Types - * @{ - */ - -/* Descriptor and status formats ---------------------------------------------- */ - -/** - * @brief RX Descriptor structure type definition - */ -typedef struct { - uint32_t Packet; /**< Receive Packet Descriptor */ - uint32_t Ctrl; /**< Receive Control Descriptor */ -} RX_Desc; - -/** - * @brief RX Status structure type definition - */ -typedef struct { - uint32_t Info; /**< Receive Information Status */ - uint32_t HashCRC; /**< Receive Hash CRC Status */ -} RX_Stat; - -/** - * @brief TX Descriptor structure type definition - */ -typedef struct { - uint32_t Packet; /**< Transmit Packet Descriptor */ - uint32_t Ctrl; /**< Transmit Control Descriptor */ -} TX_Desc; - -/** - * @brief TX Status structure type definition - */ -typedef struct { - uint32_t Info; /**< Transmit Information Status */ -} TX_Stat; - - -/** - * @brief TX Data Buffer structure definition - */ -typedef struct { - uint32_t ulDataLen; /**< Data length */ - uint32_t *pbDataBuf; /**< A word-align data pointer to data buffer */ -} EMAC_PACKETBUF_Type; - -/** - * @brief EMAC configuration structure definition - */ -typedef struct { - uint32_t Mode; /**< Supported EMAC PHY device speed, should be one of the following: - - EMAC_MODE_AUTO - - EMAC_MODE_10M_FULL - - EMAC_MODE_10M_HALF - - EMAC_MODE_100M_FULL - - EMAC_MODE_100M_HALF - */ - uint8_t *pbEMAC_Addr; /**< Pointer to EMAC Station address that contains 6-bytes - of MAC address, it must be sorted in order (bEMAC_Addr[0]..[5]) - */ -} EMAC_CFG_Type; - - -/** - * @} - */ - - -/* Public Functions ----------------------------------------------------------- */ -/** @defgroup EMAC_Public_Functions EMAC Public Functions - * @{ - */ -/* Init/DeInit EMAC peripheral */ -Status EMAC_Init(EMAC_CFG_Type *EMAC_ConfigStruct); -void EMAC_DeInit(void); - -/* PHY functions --------------*/ -int32_t EMAC_CheckPHYStatus(uint32_t ulPHYState); -int32_t EMAC_SetPHYMode(uint32_t ulPHYMode); -int32_t EMAC_UpdatePHYStatus(void); - -/* Filter functions ----------*/ -void EMAC_SetHashFilter(uint8_t dstMAC_addr[], FunctionalState NewState); -void EMAC_SetFilterMode(uint32_t ulFilterMode, FunctionalState NewState); - -/* EMAC Packet Buffer functions */ -void EMAC_WritePacketBuffer(EMAC_PACKETBUF_Type *pDataStruct); -void EMAC_ReadPacketBuffer(EMAC_PACKETBUF_Type *pDataStruct); - -/* EMAC Interrupt functions -------*/ -void EMAC_IntCmd(uint32_t ulIntType, FunctionalState NewState); -IntStatus EMAC_IntGetStatus(uint32_t ulIntType); - -/* EMAC Index functions -----------*/ -Bool EMAC_CheckReceiveIndex(void); -Bool EMAC_CheckTransmitIndex(void); -void EMAC_UpdateRxConsumeIndex(void); -void EMAC_UpdateTxProduceIndex(void); - -FlagStatus EMAC_CheckReceiveDataStatus(uint32_t ulRxStatType); -uint32_t EMAC_GetReceiveDataSize(void); -FlagStatus EMAC_GetWoLStatus(uint32_t ulWoLMode); - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* LPC17XX_EMAC_H_ */ - -/** - * @} - */ - -/* --------------------------------- End Of File ------------------------------ */