Diff: mbed-os/features/netsocket/WiFiInterface.h

Revision:

0:6ad07c9019fd

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os/features/netsocket/WiFiInterface.h	Wed May 30 00:01:50 2018 +0000
@@ -0,0 +1,106 @@
+
+/* WiFiInterface
+ * Copyright (c) 2015 - 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef WIFI_INTERFACE_H
+#define WIFI_INTERFACE_H
+
+#include <string.h>
+#include "netsocket/NetworkInterface.h"
+#include "netsocket/WiFiAccessPoint.h"
+
+/** WiFiInterface class
+ *
+ *  Common interface that is shared between WiFi devices
+ *  @addtogroup netsocket
+ */
+class WiFiInterface: public NetworkInterface
+{
+public:
+    /** WiFiInterface lifetime
+     */
+    virtual ~WiFiInterface() {};
+
+    /** Set the WiFi network credentials
+     *
+     *  @param ssid      Name of the network to connect to
+     *  @param pass      Security passphrase to connect to the network
+     *  @param security  Type of encryption for connection
+     *                   (defaults to NSAPI_SECURITY_NONE)
+     *  @return          0 on success, or error code on failure
+     */
+    virtual nsapi_error_t set_credentials(const char *ssid, const char *pass,
+            nsapi_security_t security = NSAPI_SECURITY_NONE) = 0;
+
+    /** Set the WiFi network channel
+     *
+     *  @param channel   Channel on which the connection is to be made, or 0 for any (Default: 0)
+     *  @return          0 on success, or error code on failure
+     */
+    virtual nsapi_error_t set_channel(uint8_t channel) = 0;
+
+    /** Gets the current radio signal strength for active connection
+     *
+     *  @return         Connection strength in dBm (negative value),
+     *                  or 0 if measurement impossible
+     */
+    virtual int8_t get_rssi() = 0;
+
+    /** Start the interface
+     *
+     *  Attempts to connect to a WiFi network.
+     *
+     *  @param ssid      Name of the network to connect to
+     *  @param pass      Security passphrase to connect to the network
+     *  @param security  Type of encryption for connection (Default: NSAPI_SECURITY_NONE)
+     *  @param channel   Channel on which the connection is to be made, or 0 for any (Default: 0)
+     *  @return          0 on success, or error code on failure
+     */
+    virtual nsapi_error_t connect(const char *ssid, const char *pass,
+            nsapi_security_t security = NSAPI_SECURITY_NONE, uint8_t channel = 0) = 0;
+
+    /** Start the interface
+     *
+     *  Attempts to connect to a WiFi network. Requires ssid and passphrase to be set.
+     *  If passphrase is invalid, NSAPI_ERROR_AUTH_ERROR is returned.
+     *
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual nsapi_error_t connect() = 0;
+
+    /** Stop the interface
+     *
+     *  @return         0 on success, or error code on failure
+     */
+    virtual nsapi_error_t disconnect() = 0;
+
+    /** Scan for available networks
+     *
+     *  This function will block. If the @a count is 0, function will only return count of available networks, so that
+     *  user can allocated necessary memory. If the \p count is grater than 0 and the a \p res is not NULL it'll be populated
+     *  with discovered networks up to value of \p count.
+     *
+     *  @param  res      Pointer to allocated array to store discovered AP
+     *  @param  count    Size of allocated @a res array, or 0 to only count available AP
+     *  @return          Number of entries in \p count, or if \p count was 0 number of available networks,
+     *                   negative on error see @a nsapi_error
+     */
+    virtual nsapi_size_or_error_t scan(WiFiAccessPoint *res, nsapi_size_t count) = 0;
+};
+
+#endif
+
+/** @}*/