File content as of revision 0:6d39248e2786:

//Write a program to turn on LED if analog value from any of the potentimeter is greater than 50% and turn it off when the value is less than or equal to 50%. 

//copy and paste the final code you have in the answer section.

#include "mbed.h"
DigitalOut R(p23); //Red pin of RGB LED

DigitalOut G(p24); //Green pin of RGB LED

DigitalOut B(p25); //Blue pin of RGB LED

AnalogIn pot1(p19);// input from pot 1

AnalogIn pot2(p20);// input from pot 2

void on(){ // function to turn on white LED       

R = G = B = 0;       

}        

void off(){ // function to turn off white led       

R = G = B = 1;       

}                

int main() {           

R = G = B = 1; // init RGB led to off (all 1)   

while(1)

{       

float p1 = (pot1*100); // converts the pot reading to % (multiple by 100)       

float p2 = (pot2*100); // converts the pot reading to % (multiple by 100) 

if(p1 >50 || p2 >50){ // if value of p1 OR p2 > 50 (technically 50.00...) the LED will turn on.             

on(); // call function "on"             

}             

else // if the float value of either p1 or p2 is less than or equal to 50 (technically 50.00...) the LEd will go off.             

{               

off(); // call function "off"               

}   

}

}