File content as of revision 91:cc797b17b973:

/**
 ******************************************************************************
 * @file    hts221.h
 * @author  MEMS Application Team
 * @version V1.2.0
 * @date    11-February-2015
 * @brief   This file contains definitions for the hts221.c
 *          firmware driver.
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *   1. Redistributions of source code must retain the above copyright notice,
 *      this list of conditions and the following disclaimer.
 *   2. Redistributions in binary form must reproduce the above copyright notice,
 *      this list of conditions and the following disclaimer in the documentation
 *      and/or other materials provided with the distribution.
 *   3. Neither the name of STMicroelectronics nor the names of its contributors
 *      may be used to endorse or promote products derived from this software
 *      without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************
 */


/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __HTS221_H
#define __HTS221_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "hum_temp.h"

/** @addtogroup BSP
  * @{
  */

/** @addtogroup Components
 * @{
 */

/** @addtogroup HTS221
  * @{
  */

/** @defgroup HTS221_Exported_Defines HTS221_Exported_Defines
  * @{
  */
#ifndef NULL
#define NULL      (void *) 0
#endif

/**
  * @brief Device Address
  */
#define HTS221_ADDRESS                              0xBE

/******************************************************************************/
/*************************** START REGISTER MAPPING  **************************/
/******************************************************************************/


/**
 * @brief Device identification register.
 * \code
   * Read
 * Default value: 0xBC
 * 7:0 This read-only register contains the device identifier that, for HTS221, is set to BCh.
 * \endcode
*/
#define HTS221_WHO_AM_I_ADDR                        0x0F


/**
 * @brief Humidity resolution Register
 * \code
 * Read/write
 * Default value: 0x1B
 * 7:6 RFU
 * 5:3 AVGT2-AVGT0: Temperature internal average.
 *     AVGT2 | AVGT1 | AVGT0 | Nr. Internal Average
 *   ------------------------------------------------------
 *      0    |  0    |  0    |     2
 *      0    |  0    |  1    |     4
 *      0    |  1    |  0    |     8
 *      0    |  1    |  1    |     16
 *      1    |  0    |  0    |     32
 *      1    |  0    |  1    |     64
 *      1    |  1    |  0    |     128
 *      1    |  1    |  1    |     256
 *
 * 2:0 AVGH2-AVGH0: Humidity internal average.
 *     AVGH2 | AVGH1 | AVGH0 | Nr. Internal Average
 *   ------------------------------------------------------
 *      0    |  0    |  0    |     4
 *      0    |  0    |  1    |     8
 *      0    |  1    |  0    |     16
 *      0    |  1    |  1    |     32
 *      1    |  0    |  0    |     64
 *      1    |  0    |  1    |     128
 *      1    |  1    |  0    |     256
 *      1    |  1    |  1    |     512
 *
 * \endcode
 */
#define HTS221_RES_CONF_ADDR                        0x10


/**
* @brief INFO Register  (LSB data)
* \code
* Read/write
* Default value: 0x00
* 7:0 INFO7-INFO0: Lower part of the INFO reference
*                  used for traceability of the sample.
* \endcode
*/
#define HTS221_INFO_L_ADDR                          0x1E


/**
* @brief INFO & Calibration Version Register  (LSB data)
* \code
* Read/write
* Default value: 0x00
* 7:6 CALVER1:CALVER0
* 5:0 INFO13-INFO8: Higher part of the INFO reference
*                  used for traceability of the sample.
* \endcode
*/
#define HTS221_INFO_H_ADDR                          0x1F


/**
* @brief Humidity sensor control register 1
* \code
* Read/write
* Default value: 0x00
* 7    PD: power down control. 0 - disable; 1 - enable
* 6:3  RFU
* 2    BDU: block data update. 0 - disable; 1 - enable
* 1:0  RFU
* \endcode
*/

#define HTS221_CTRL_REG1_ADDR                       0x20


/**
* @brief Humidity sensor control register 2
* \code
* Read/write
* Default value: 0x00
* 7    BOOT:  Reboot memory content. 0: normal mode; 1: reboot memory content
* 6:3  Reserved.
* 2    Reserved.
* 1    Reserved.
* 0    ONE_SHOT: One shot enable. 0: waiting for start of conversion; 1: start for a new dataset
* \endcode
*/
#define HTS221_CTRL_REG2_ADDR                       0x21


/**
* @brief Humidity sensor control register 3
* \code
* Read/write
* Default value: 0x00
* [7]   DRDY_H_L: Data Ready output signal active high, low (0: active high -default;1: active low)
* [6]   PP_OD: Push-pull / Open Drain selection on pin 3 (DRDY) (0: push-pull - default; 1: open drain)
* [5:3] Reserved
* [2]   DRDY_EN: Data Ready enable (0: Data Ready disabled - default;1: Data Ready signal available on pin 3)
* [1:0] Reserved
* \endcode
*/
#define HTS221_CTRL_REG3_ADDR                       0x22


/**
* @brief  Status Register
* \code
* Read
* Default value: 0x00
* 7:2  RFU
* 1    H_DA: Humidity data available. 0: new data for Humidity is not yet available; 1: new data for Humidity is available.
* 0    T_DA: Temperature data available. 0: new data for temperature is not yet available; 1: new data for temperature is available.
* \endcode
*/
#define HTS221_STATUS_REG_ADDR                      0x27


/**
* @brief  Humidity data (LSB).
* \code
* Read
* Default value: 0x00.
* POUT7 - POUT0: Humidity data LSB (2's complement) => signed 16 bits
* RAW Humidity output data: Hout(%)=(HUMIDITY_OUT_H & HUMIDITY_OUT_L).
* \endcode
*/
#define HTS221_HUMIDITY_OUT_L_ADDR                  0x28


/**
* @brief  Humidity data (MSB).
* \code
* Read
* Default value: 0x00.
* POUT7 - POUT0: Humidity data LSB (2's complement) => signed 16 bits
* RAW Humidity output data: Hout(%)=(HUMIDITY_OUT_H & HUMIDITY_OUT_L).
* \endcode
*/
#define HTS221_HUMIDITY_OUT_H_ADDR                  0x29


/**
* @brief  Temperature data (LSB).
* \code
* Read
* Default value: 0x00.
* TOUT7 - TOUT0: temperature data LSB (2's complement) => signed 16 bits
* RAW Temperature output data: Tout (LSB)=(TEMP_OUT_H & TEMP_OUT_L).
* \endcode
*/
#define HTS221_TEMP_OUT_L_ADDR                      0x2A


/**
* @brief  Temperature data (MSB).
* \code
* Read
* Default value: 0x00.
* TOUT15 - TOUT8: temperature data MSB (2's complement) => signed 16 bits
* RAW Temperature output data: Tout (LSB)=(TEMP_OUT_H & TEMP_OUT_L).
* \endcode
*/
#define HTS221_TEMP_OUT_H_ADDR                      0x2B


/**
*@brief Humidity 0 Register in %RH with sensitivity=2
*\code
* Read
* Value: (Unsigned 8 Bit)/2
*\endcode
*/
#define HTS221_H0_RH_X2_ADDR                        0x30


/**
*@brief Humidity 1 Register in %RH with sensitivity=2
*\code
* Read
* Value: (Unsigned 8 Bit)/2
*\endcode
*/
#define HTS221_H1_RH_X2_ADDR                        0x31


/**
*@brief Temperature 0 Register in deg with sensitivity=8
*\code
* Read
* Value: (Unsigned 16 Bit)/2
*\endcode
*/
#define HTS221_T0_degC_X8_ADDR                      0x32


/**
*@brief Temperature 1 Register in deg with sensitivity=8
*\code
* Read
* Value: (Unsigned 16 Bit)/2
*\endcode
*/
#define HTS221_T1_degC_X8_ADDR                      0x33


/**
*@brief Temperature 1/0 MSB Register in deg with sensitivity=8
*\code
* Read
* Value: (Unsigned 16 Bit)/2
* 3:2  T1(9):T1(8) MSB T1_degC_X8 bits
* 1:0  T0(9):T0(8) MSB T0_degC_X8 bits
*\endcode
*/
#define HTS221_T1_T0_MSB_X8_ADDR                    0x35


/**
*@brief Humidity LOW CALIBRATION Register
*\code
* Read
* Default value: 0x00.
* H0_T0_TOUT7 - H0_T0_TOUT0: HUMIDITY data lSB (2's complement) => signed 16 bits
*\endcode
*/
#define HTS221_H0_T0_OUT_L_ADDR                     0x36


/**
*@brief Humidity LOW CALIBRATION Register
*\code
* Read
* Default value: 0x00.
* H0_T0_TOUT15 - H0_T0_TOUT8: HUMIDITY data mSB (2's complement) => signed 16 bits
*\endcode
*/
#define HTS221_H0_T0_OUT_H_ADDR                       0x37


/**
*@brief Humidity HIGH CALIBRATION Register
*\code
* Read
* Default value: 0x00.
* H1_T0_TOUT7 - H1_T0_TOUT0: HUMIDITY data lSB (2's complement) => signed 16 bits
*\endcode
*/
#define HTS221_H1_T0_OUT_L_ADDR                       0x3A


/**
*@brief Humidity HIGH CALIBRATION Register
*\code
* Read
* Default value: 0x00.
* H1_T0_TOUT15 - H1_T0_TOUT8: HUMIDITY data mSB (2's complement) => signed 16 bits
*\endcode
*/
#define HTS221_H1_T0_OUT_H_ADDR                       0x3B


/**
* @brief  Low Calibration Temperature Register (LSB).
* \code
* Read
* Default value: 0x00.
* T0_OUT7 - T0_OUT0: temperature data LSB (2's complement) => signed 16 bits
*  RAW LOW Calibration data: T0_OUT (LSB)=(T0_OUT_H & T0_OUT_L).
* \endcode
*/
#define HTS221_T0_OUT_L_ADDR                        0x3C


/**
* @brief  Low Calibration Temperature Register (MSB)
* \code
* Read
* Default value: 0x00.
* T0_OUT15 - T0_OUT8: temperature data MSB (2's complement) => signed 16 bits
* RAW LOW Calibration data: T0_OUT (LSB)=(T0_OUT_H & T0_OUT_L).
* \endcode
*/
#define HTS221_T0_OUT_H_ADDR                        0x3D


/**
* @brief  Low Calibration Temperature Register (LSB).
* \code
* Read
* Default value: 0x00.
* T1_OUT7 - T1_OUT0: temperature data LSB (2's complement) => signed 16 bits
*  RAW LOW Calibration data: T1_OUT (LSB)=(T1_OUT_H & T1_OUT_L).
* \endcode
*/
#define HTS221_T1_OUT_L_ADDR                        0x3E


/**
* @brief  Low Calibration Temperature Register (MSB)
* \code
* Read
* Default value: 0x00.
* T1_OUT15 - T1_OUT8: temperature data MSB (2's complement) => signed 16 bits
* RAW LOW Calibration data: T1_OUT (LSB)=(T1_OUT_H & T1_OUT_L).
* \endcode
*/
#define HTS221_T1_OUT_H_ADDR                        0x3F


/******************************************************************************/
/**************************** END REGISTER MAPPING  ***************************/
/******************************************************************************/

/**
 * @brief Multiple Byte. Mask for enabling multiple byte read/write command.
 */
#define HTS221_I2C_MULTIPLEBYTE_CMD                      ((uint8_t)0x80)

/**
 * @brief Device Identifier. Default value of the WHO_AM_I register.
 */
#define I_AM_HTS221                         ((uint8_t)0xBC)


/** @defgroup HTS221_Power_Mode_Selection_CTRL_REG1 HTS221_Power_Mode_Selection_CTRL_REG1
  * @{
  */
#define HTS221_MODE_POWERDOWN               ((uint8_t)0x00)
#define HTS221_MODE_ACTIVE                  ((uint8_t)0x80)

#define HTS221_MODE_MASK                    ((uint8_t)0x80)
/**
  * @}
  */


/** @defgroup HTS221_Block_Data_Update_Mode_Selection_CTRL_REG1 HTS221_Block_Data_Update_Mode_Selection_CTRL_REG1
  * @{
  */
#define HTS221_BDU_CONTINUOUS               ((uint8_t)0x00)
#define HTS221_BDU_NOT_UNTIL_READING        ((uint8_t)0x04)

#define HTS221_BDU_MASK                     ((uint8_t)0x04)
/**
  * @}
  */

/** @defgroup HTS221_Output_Data_Rate_Selection_CTRL_REG1 HTS221_Output_Data_Rate_Selection_CTRL_REG1
 * @{
 */
#define HTS221_ODR_ONE_SHOT             ((uint8_t)0x00) /*!< Output Data Rate: H - one shot, T - one shot */
#define HTS221_ODR_1Hz                  ((uint8_t)0x01) /*!< Output Data Rate: H - 1Hz, T - 1Hz */
#define HTS221_ODR_7Hz                  ((uint8_t)0x02) /*!< Output Data Rate: H - 7Hz, T - 7Hz */
#define HTS221_ODR_12_5Hz               ((uint8_t)0x03) /*!< Output Data Rate: H - 12.5Hz, T - 12.5Hz */

#define HTS221_ODR_MASK                 ((uint8_t)0x03)
/**
* @}
*/


/** @defgroup HTS221_Boot_Mode_Selection_CTRL_REG2 HTS221_Boot_Mode_Selection_CTRL_REG2
  * @{
  */
#define HTS221_BOOT_NORMALMODE              ((uint8_t)0x00)
#define HTS221_BOOT_REBOOTMEMORY            ((uint8_t)0x80)

#define HTS221_BOOT_MASK                    ((uint8_t)0x80)
/**
  * @}
  */


/** @defgroup HTS221_One_Shot_Selection_CTRL_REG2 HTS221_One_Shot_Selection_CTRL_REG2
 * @{
 */
#define HTS221_ONE_SHOT_START               ((uint8_t)0x01)

#define HTS221_ONE_SHOT_MASK                ((uint8_t)0x01)
/**
 * @}
 */

/** @defgroup HTS221_PushPull_OpenDrain_Selection_CTRL_REG3 HTS221_PushPull_OpenDrain_Selection_CTRL_REG3
  * @{
  */
#define HTS221_PP_OD_PUSH_PULL              ((uint8_t)0x00)
#define HTS221_PP_OD_OPEN_DRAIN             ((uint8_t)0x40)

#define HTS221_PP_OD_MASK                   ((uint8_t)0x40)
/**
  * @}
  */


/** @defgroup HTS221_Data_Ready_Selection_CTRL_REG3 HTS221_Data_Ready_Selection_CTRL_REG3
  * @{
  */
#define HTS221_DRDY_DISABLE                 ((uint8_t)0x00)
#define HTS221_DRDY_AVAILABLE               ((uint8_t)0x04)

#define HTS221_DRDY_MASK                    ((uint8_t)0x04)
/**
  * @}
  */


/** @defgroup HTS221_Humidity_Resolution_Selection_RES_CONF HTS221_Humidity_Resolution_Selection_RES_CONF
  * @{
  */
#define HTS221_H_RES_AVG_4                  ((uint8_t)0x00)
#define HTS221_H_RES_AVG_8                  ((uint8_t)0x01)
#define HTS221_H_RES_AVG_16                 ((uint8_t)0x02)
#define HTS221_H_RES_AVG_32                 ((uint8_t)0x03)
#define HTS221_H_RES_AVG_64                 ((uint8_t)0x04)
#define HTS221_H_RES_AVG_128                ((uint8_t)0x05)

#define HTS221_H_RES_MASK                   ((uint8_t)0x07)
/**
  * @}
  */


/** @defgroup HTS221_Temperature_Resolution_Selection_RES_CONF HTS221_Temperature_Resolution_Selection_RES_CONF
  * @{
  */
#define HTS221_T_RES_AVG_2                  ((uint8_t)0x00)
#define HTS221_T_RES_AVG_4                  ((uint8_t)0x08)
#define HTS221_T_RES_AVG_8                  ((uint8_t)0x10)
#define HTS221_T_RES_AVG_16                 ((uint8_t)0x18)
#define HTS221_T_RES_AVG_32                 ((uint8_t)0x20)
#define HTS221_T_RES_AVG_64                 ((uint8_t)0x28)

#define HTS221_T_RES_MASK                   ((uint8_t)0x38)
/**
  * @}
  */


/** @defgroup HTS221_Temperature_Humidity_Data_Available_STATUS_REG HTS221_Temperature_Humidity_Data_Available_STATUS_REG
  * @{
  */
#define HTS221_H_DATA_AVAILABLE_MASK        ((uint8_t)0x02)
#define HTS221_T_DATA_AVAILABLE_MASK        ((uint8_t)0x01)
/**
  * @}
  */

/* Data resolution */
#define HUM_DECIMAL_DIGITS                  (2)
#define TEMP_DECIMAL_DIGITS                 (2)

/**
  * @}
  */


/** @defgroup HTS221_Imported_Functions HTS221_Imported_Functions
  * @{
  */
/* HUM_TEMP sensor IO functions */
extern HUM_TEMP_StatusTypeDef HTS221_IO_Init(void);
extern HUM_TEMP_StatusTypeDef HTS221_IO_Write(uint8_t* pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr,
    uint16_t NumByteToWrite);
extern HUM_TEMP_StatusTypeDef HTS221_IO_Read(uint8_t* pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr,
    uint16_t NumByteToRead);
extern void HTS221_IO_ITConfig( void );

/**
  * @}
  */

/* ------------------------------------------------------- */
/* Here you should declare the internal struct of          */
/* extended features of HTS221. See the example of         */
/* LSM6DS3 in lsm6ds3.h                                    */
/* ------------------------------------------------------- */

/** @addtogroup HTS221_Exported_Variables HTS221_Exported_Variables
 * @{
 */
/* HUM_TEMP sensor driver structure */
extern HUM_TEMP_DrvTypeDef Hts221Drv;
extern HUM_TEMP_DrvExtTypeDef Hts221Drv_ext;
/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __HTS221_H */


/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/