AppNearMe µNFC stack for the NXP PN532 chip License: You can use the stack free of charge to prototype with mbed; if you want to use the stack with your commercial product, get in touch!
Dependents: IOT_sensor_nfc AppNearMe_MuNFC_PN532_Test p2p_nfc_test NFCMoodLamp ... more
License
You can use the stack free of charge to prototype with mbed; if you want to use the stack with your commercial product, get in touch!
Diff: PN532/munfc/drv/pn532/pn532_registers.h
- Revision:
- 10:2af578c635cd
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/PN532/munfc/drv/pn532/pn532_registers.h Wed Nov 07 18:18:52 2012 +0000 @@ -0,0 +1,33 @@ +/* + pn532_registers.h + Copyright (c) Donatien Garnier 2012 + donatien.garnier@appnearme.com + http://www.appnearme.com/ +*/ + + +#ifndef PN532_REGISTERS_H_ +#define PN532_REGISTERS_H_ + + +#ifdef __cplusplus +extern "C" { +#endif + +//We only place common SFR-accessible registers here for now +#define PN532_REG_CLU_STATUS2 0x6338 //Contains status flags of the receiver, transmitter and Data Mode Detector +#define PN532_REG_CLU_CONTROL 0x633C//0xFFED //Contains miscellaneous Control Registers +#define PN532_REG_CLU_BITFRAMING 0x633D//0xFFEE //Adjustments for bit oriented frames +#define PN532_REG_CLU_MANUALRCV 0x630D //Tuning of the internal receiver +#define PN532_REG_CLU_TXMODE 0x6302 //Defines the transmission data rate and framing during transmission +#define PN532_REG_CLU_RXMODE 0x6303 //Defines the reception data rate and framing during receiving +#define PN532_REG_CLU_TXAUTO 0x6305 //Controls the setting of the antenna driver +#define PN532_REG_CLU_MODE 0x6301 //Defines general modes for transmitting and receiving. +#define PN532_REG_CLU_MIFNFC 0x630C //Defines ISO/IEC 14443A/MIFARE/NFC specific settings in target or card operating mode. + +#ifdef __cplusplus +} +#endif + + +#endif /* PN532_REGISTERS_H_ */