AppNearMe Official
AppNearMe µNFC stack for the NXP PN532 chip License: You can use the stack free of charge to prototype with mbed; if you want to use the stack with your commercial product, get in touch!
Dependents: IOT_sensor_nfc AppNearMe_MuNFC_PN532_Test p2p_nfc_test NFCMoodLamp ... more
License
You can use the stack free of charge to prototype with mbed; if you want to use the stack with your commercial product, get in touch!
Diff: PN532/munfc/drv/pn532/pn532_cmd.h
- Revision:
- 10:2af578c635cd
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PN532/munfc/drv/pn532/pn532_cmd.h Wed Nov 07 18:18:52 2012 +0000
@@ -0,0 +1,94 @@
+/*
+ pn532_cmd.h
+ Copyright (c) Donatien Garnier 2012
+ donatien.garnier@appnearme.com
+ http://www.appnearme.com/
+*/
+
+
+#ifndef PN532_CMD_H_
+#define PN532_CMD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "core/fwk.h"
+
+// Commands
+int pn532_cmd_get_firmware_version( uint8_t* pIc, uint16_t* pVersion, int timeout );
+
+#define PN532_PARAMETERS_NONE 0x00
+#define PN532_PARAMETERS_NAD_USED 0x01
+#define PN532_PARAMETERS_DID_USED 0x02
+#define PN532_PARAMETERS_AUTO_ATR_RES 0x04
+#define PN532_PARAMETERS_AUTO_RATS 0x10
+#define PN532_PARAMETERS_ISO_14443_4_EMU 0x20
+#define PN532_PARAMETERS_NO_PRE_POSTAMBLE 0x40
+
+int pn532_cmd_set_parameters( uint8_t flags, int timeout );
+
+int pn532_cmd_sam_configuration( uint8_t mode, int timeout );
+
+//Target mode selection
+#define PN532_TARGET_PASSIVE_ONLY 0x01
+#define PN532_TARGET_DEP_ONLY 0x02
+#define PN532_TARGET_PICC_ONLY 0x04
+
+//Target mode
+#define PN532_TARGET_BAUDRATE_MASK 0x70
+#define PN532_TARGET_BAUDRATE_106K 0x00
+#define PN532_TARGET_BAUDRATE_212K 0x01
+#define PN532_TARGET_BAUDRATE_414K 0x02
+#define PN532_TARGET_ISO_14443_4_PICC 0x08
+#define PN532_TARGET_DEP 0x04
+#define PN532_TARGET_FRAMING_MASK 0x03
+#define PN532_TARGET_FRAMING_MIFARE 0x00
+#define PN532_TARGET_FRAMING_ACTIVE 0x01
+#define PN532_TARGET_FRAMING_FELICA 0x02
+
+//Initiator mode
+#define PN532_READER_MODE_ISO14443A_106K 0x00
+#define PN532_READER_MODE_FELICA_212K 0x01
+#define PN532_READER_MODE_FELICA_424K 0x02
+#define PN532_READER_MODE_ISO14443B_106K 0x03
+#define PN532_READER_MODE_JEWEL_106K 0x04
+
+// pMifareParams : 6 bytes long, pFelicaParams : 18, pNfcId3 : 10
+int pn532_cmd_target_init( uint8_t outMode, buffer* pMifareParams, buffer* pFelicaParams,
+ buffer* pNfcId3, buffer* pAtrG, buffer* pAtrT, uint8_t* pInMode, buffer* pData, int timeout);
+
+int pn532_cmd_target_get( buffer* pData, uint8_t* pStatus, int timeout );
+
+int pn532_cmd_target_respond( buffer* pData, uint8_t* pStatus, int timeout );
+
+//PN532 handles framing
+int pn532_cmd_target_data_get( buffer* pData, uint8_t* pStatus, int timeout );
+
+int pn532_cmd_target_data_respond( buffer* pData, uint8_t* pStatus, int timeout );
+
+int pn532_cmd_target_status( uint8_t* pState, uint8_t* pBaudrate, int timeout );
+
+int pn532_cmd_reader_poll( uint8_t mode, uint8_t* pTargetDetected, buffer* pInitiatorData, int timeout );
+
+//PN532 handles framing
+int pn532_cmd_reader_data_transceive( buffer* pDataOut, buffer* pDataIn, uint8_t* pStatus, int timeout );
+
+int pn532_cmd_register_read( uint16_t address, uint8_t* pData, int timeout );
+
+int pn532_cmd_register_write( uint16_t address, uint8_t data, int timeout );
+
+int pn532_cmd_set_rf_field( bool on, int timeout );
+
+int pn532_cmd_set_rf_iso14443a_params( buffer* pData, int timeout );
+
+int pn532_cmd_get_status( uint8_t* pErr, uint8_t* pField, int timeout );
+
+// Low-level command
+int pn532_cmd_exec( buffer* pDataOut, buffer* pDataIn, int timeout );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PN532_CMD_H_ */