Diff: USBDevice/TARGET_Silicon_Labs/src/em_usbhal.c

Revision:

59:2af474687369

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USBDevice/TARGET_Silicon_Labs/src/em_usbhal.c	Thu Aug 13 15:46:06 2015 +0100
@@ -0,0 +1,799 @@
+/**************************************************************************//**
+ * @file em_usbhal.c
+ * @brief USB protocol stack library, low level USB peripheral access.
+ * @version 3.20.14
+ ******************************************************************************
+ * @section License
+ * <b>(C) Copyright 2014 Silicon Labs, http://www.silabs.com</b>
+ *******************************************************************************
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************/
+
+#include "em_device.h"
+#if defined( USB_PRESENT ) && ( USB_COUNT == 1 )
+#include "em_usb.h"
+#if defined( USB_DEVICE ) || defined( USB_HOST )
+
+#include "em_usbtypes.h"
+#include "em_usbhal.h"
+#if defined( USB_DEVICE )
+#include "em_usbd.h"
+#endif
+#if defined( USB_HOST )
+#include "em_usbh.h"
+#endif
+#include "em_cmu.h"
+#include "em_gpio.h"
+
+/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */
+
+#define EPABORT_BREAK_LOOP_COUNT 15000              /* Approx. 100 ms */
+
+/* NOTE: The sequence of error message strings must agree with the    */
+/*       definition of USB_Status_TypeDef enum.                       */
+static const char * const errMsg[] =
+{
+  [  USB_STATUS_OK                  ] = "No errors",
+  [ -USB_STATUS_REQ_ERR             ] = "Setup request error",
+  [ -USB_STATUS_EP_BUSY             ] = "Endpoint is busy",
+  [ -USB_STATUS_REQ_UNHANDLED       ] = "Setup request not handled",
+  [ -USB_STATUS_ILLEGAL             ] = "Illegal operation attempted",
+  [ -USB_STATUS_EP_STALLED          ] = "Endpoint is stalled",
+  [ -USB_STATUS_EP_ABORTED          ] = "Transfer aborted",
+  [ -USB_STATUS_EP_ERROR            ] = "Transfer error",
+  [ -USB_STATUS_EP_NAK              ] = "Endpoint NAK",
+  [ -USB_STATUS_DEVICE_UNCONFIGURED ] = "Device is not configured",
+  [ -USB_STATUS_DEVICE_SUSPENDED    ] = "Device is suspended",
+  [ -USB_STATUS_DEVICE_RESET        ] = "Device has been reset",
+  [ -USB_STATUS_TIMEOUT             ] = "Transfer timeout",
+  [ -USB_STATUS_DEVICE_REMOVED      ] = "Device removed",
+  [ -USB_STATUS_HC_BUSY             ] = "Host channel is busy",
+  [ -USB_STATUS_DEVICE_MALFUNCTION  ] = "Device malfunction",
+  [ -USB_STATUS_PORT_OVERCURRENT    ] = "VBUS overcurrent",
+};
+/** @endcond */
+
+
+/***************************************************************************//**
+ * @brief
+ *   Return an error message string for a given error code.
+ *
+ * @param[in] error
+ *   Error code, see \ref USB_Status_TypeDef.
+ *
+ * @return
+ *   Error message string pointer.
+ ******************************************************************************/
+char *USB_GetErrorMsgString( int error )
+{
+  if ( error >= 0 )
+    return (char*)errMsg[ 0 ];
+
+  return (char*)errMsg[ -error ];
+}
+
+
+#if defined( USB_USE_PRINTF )
+/***************************************************************************//**
+ * @brief
+ *   Format and print a text string given an error code, prepends an optional user
+ *   supplied leader string.
+ *
+ * @param[in] pre
+ *   Optional leader string to prepend to error message string.
+ *
+ * @param[in] error
+ *   Error code, see \ref USB_Status_TypeDef.
+ ******************************************************************************/
+void USB_PrintErrorMsgString( char *pre, int error )
+{
+  if ( pre )
+  {
+    USB_PRINTF( "%s", pre );
+  }
+
+  if ( error > USB_STATUS_OK )
+  {
+    USB_PRINTF( "%d", error );
+  }
+  else
+  {
+    USB_PRINTF( "%s", USB_GetErrorMsgString( error ) );
+  }
+}
+#endif /* defined( USB_USE_PRINTF ) */
+
+/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */
+
+#if defined( DEBUG_EFM_USER )
+static void PrintI( int i )
+{
+#if !defined ( USER_PUTCHAR )
+  (void)i;
+#else
+  if ( i >= 10 )
+  {
+    PrintI( i / 10 );
+  }
+
+  DEBUG_USB_API_PUTCHAR( ( i % 10 ) + '0' );
+#endif
+}
+
+void assertEFM( const char *file, int line )
+{
+#if !defined ( USER_PUTCHAR )
+  (void)file;
+#endif
+
+  DEBUG_USB_API_PUTS( "\nASSERT " );
+  DEBUG_USB_API_PUTS( file );
+  DEBUG_USB_API_PUTCHAR( ' ' );
+  PrintI( line );
+  for(;;){}
+}
+#endif /* defined( DEBUG_EFM_USER ) */
+
+#if defined ( USER_PUTCHAR )
+void USB_Puts( const char *p )
+{
+  while( *p )
+    USB_PUTCHAR( *p++ );
+}
+#endif /* defined ( USER_PUTCHAR ) */
+
+void USBHAL_CoreReset( void )
+{
+  USB->PCGCCTL &= ~USB_PCGCCTL_STOPPCLK;
+  USB->PCGCCTL &= ~(USB_PCGCCTL_PWRCLMP | USB_PCGCCTL_RSTPDWNMODULE);
+
+  /* Core Soft Reset */
+  USB->GRSTCTL |= USB_GRSTCTL_CSFTRST;
+  while ( USB->GRSTCTL & USB_GRSTCTL_CSFTRST ) {}
+
+  USBTIMER_DelayUs( 1 );
+
+  /* Wait for AHB master IDLE state. */
+  while ( !( USB->GRSTCTL & USB_GRSTCTL_AHBIDLE ) ) {}
+}
+
+#ifdef USB_DEVICE
+void USBDHAL_Connect( void )
+{
+  USB->DCTL &= ~( DCTL_WO_BITMASK | USB_DCTL_SFTDISCON );
+}
+
+USB_Status_TypeDef USBDHAL_CoreInit( uint32_t totalRxFifoSize,
+                                     uint32_t totalTxFifoSize )
+{
+  uint8_t i, j;
+  uint16_t start, depth;
+  USBD_Ep_TypeDef *ep;
+
+#if !defined( USB_VBUS_SWITCH_NOT_PRESENT )
+  CMU_ClockEnable( cmuClock_GPIO, true );
+  GPIO_PinModeSet( gpioPortF, 5, gpioModePushPull, 0 ); /* Enable VBUSEN pin */
+  USB->ROUTE = USB_ROUTE_PHYPEN | USB_ROUTE_VBUSENPEN;  /* Enable PHY pins.  */
+#else
+  USB->ROUTE = USB_ROUTE_PHYPEN;                        /* Enable PHY pins.  */
+#endif
+
+  USBHAL_CoreReset();                                   /* Reset USB core    */
+
+#if defined( USB_GUSBCFG_FORCEHSTMODE )
+  /* Force Device Mode */
+  USB->GUSBCFG = ( USB->GUSBCFG                                    &
+                  ~(GUSBCFG_WO_BITMASK | USB_GUSBCFG_FORCEHSTMODE )  ) |
+                 USB_GUSBCFG_FORCEDEVMODE;
+#endif
+
+  INT_Enable();
+  USBTIMER_DelayMs( 50 );
+  INT_Disable();
+
+  /* Set device speed */
+  USB->DCFG = ( USB->DCFG & ~_USB_DCFG_DEVSPD_MASK ) | 3; /* Full speed PHY */
+
+  /* Stall on non-zero len status OUT packets (ctrl transfers). */
+  USB->DCFG |= USB_DCFG_NZSTSOUTHSHK;
+
+  /* Set periodic frame interval to 80% */
+  USB->DCFG &= ~_USB_DCFG_PERFRINT_MASK;
+
+  USB->GAHBCFG = ( USB->GAHBCFG & ~_USB_GAHBCFG_HBSTLEN_MASK ) |
+                 USB_GAHBCFG_DMAEN | USB_GAHBCFG_HBSTLEN_INCR;
+
+  /* Ignore frame numbers on ISO transfers. */
+  USB->DCTL = ( USB->DCTL & ~DCTL_WO_BITMASK ) | USB_DCTL_IGNRFRMNUM;
+
+  /* Set Rx FIFO size */
+  start = EFM32_MAX( totalRxFifoSize, MIN_EP_FIFO_SIZE_INWORDS );
+  USB->GRXFSIZ = ( start << _USB_GRXFSIZ_RXFDEP_SHIFT ) &
+                 _USB_GRXFSIZ_RXFDEP_MASK;
+
+  /* Set Tx EP0 FIFO size */
+  depth = EFM32_MAX( dev->ep[ 0 ].fifoSize, MIN_EP_FIFO_SIZE_INWORDS );
+  USB->GNPTXFSIZ = ( ( depth << _USB_GNPTXFSIZ_NPTXFINEPTXF0DEP_SHIFT ) &
+                     _USB_GNPTXFSIZ_NPTXFINEPTXF0DEP_MASK                 ) |
+                   ( ( start << _USB_GNPTXFSIZ_NPTXFSTADDR_SHIFT ) &
+                     _USB_GNPTXFSIZ_NPTXFSTADDR_MASK                      );
+
+
+  /* Set Tx EP FIFO sizes for all IN ep's */
+  for ( j = 1; j <= MAX_NUM_TX_FIFOS; j++ )
+  {
+    for ( i = 1; i <= MAX_NUM_IN_EPS; i++ )
+    {
+      ep = USBD_GetEpFromAddr( USB_SETUP_DIR_MASK | i );
+      if ( ep )                             /* Is EP in use ? */
+      {
+        if ( ep->txFifoNum == j )           /* Is it correct FIFO number ? */
+        {
+          start += depth;
+          depth = EFM32_MAX( ep->fifoSize, MIN_EP_FIFO_SIZE_INWORDS );
+          USB_DIEPTXFS[ ep->txFifoNum - 1 ] =
+                              ( depth << _USB_DIEPTXF1_INEPNTXFDEP_SHIFT   ) |
+                              ( start &  _USB_DIEPTXF1_INEPNTXFSTADDR_MASK );
+        }
+      }
+    }
+  }
+
+  if ( totalRxFifoSize + totalTxFifoSize > MAX_DEVICE_FIFO_SIZE_INWORDS )
+    return USB_STATUS_ILLEGAL;
+
+  if ( start > MAX_DEVICE_FIFO_SIZE_INWORDS )
+    return USB_STATUS_ILLEGAL;
+
+  /* Flush the FIFO's */
+  USBHAL_FlushTxFifo( 0x10 );      /* All Tx FIFO's */
+  USBHAL_FlushRxFifo();            /* The Rx FIFO   */
+
+  /* Disable all device interrupts */
+  USB->DIEPMSK  = 0;
+  USB->DOEPMSK  = 0;
+  USB->DAINTMSK = 0;
+  USB->DIEPEMPMSK = 0;
+
+  /* Disable all EP's, clear all EP ints. */
+  for ( i = 0; i <= MAX_NUM_IN_EPS; i++ )
+  {
+    USB_DINEPS[ i ].CTL  = 0;
+    USB_DINEPS[ i ].TSIZ = 0;
+    USB_DINEPS[ i ].INT  = 0xFFFFFFFF;
+  }
+
+  for ( i = 0; i <= MAX_NUM_OUT_EPS; i++ )
+  {
+    USB_DOUTEPS[ i ].CTL  = 0;
+    USB_DOUTEPS[ i ].TSIZ = 0;
+    USB_DOUTEPS[ i ].INT  = 0xFFFFFFFF;
+  }
+
+#if ( USB_DCTL_SFTDISCON_DEFAULT != 0 )
+  USBD_Connect();
+#endif
+
+  /* Enable VREGO sense. */
+  USB->CTRL |= USB_CTRL_VREGOSEN;
+  USB->IFC   = USB_IFC_VREGOSH | USB_IFC_VREGOSL;
+  USB->IEN   = USB_IFC_VREGOSH | USB_IFC_VREGOSL;
+  /* Force a VREGO interrupt. */
+  if ( USB->STATUS & USB_STATUS_VREGOS)
+    USB->IFS = USB_IFS_VREGOSH;
+  else
+    USB->IFS = USB_IFS_VREGOSL;
+
+  return USB_STATUS_OK;
+}
+
+USB_Status_TypeDef USBDHAL_ReconfigureFifos( uint32_t totalRxFifoSize,
+                                             uint32_t totalTxFifoSize )
+{
+  uint8_t i, j;
+  uint16_t start, depth;
+  USBD_Ep_TypeDef *ep;
+
+  /* Set Rx FIFO size */
+  start = EFM32_MAX( totalRxFifoSize, MIN_EP_FIFO_SIZE_INWORDS );
+  USB->GRXFSIZ = ( start << _USB_GRXFSIZ_RXFDEP_SHIFT ) &
+                 _USB_GRXFSIZ_RXFDEP_MASK;
+
+  /* Set Tx EP0 FIFO size */
+  depth = EFM32_MAX( dev->ep[ 0 ].fifoSize, MIN_EP_FIFO_SIZE_INWORDS );
+  USB->GNPTXFSIZ = ( ( depth << _USB_GNPTXFSIZ_NPTXFINEPTXF0DEP_SHIFT ) &
+                     _USB_GNPTXFSIZ_NPTXFINEPTXF0DEP_MASK                 ) |
+                   ( ( start << _USB_GNPTXFSIZ_NPTXFSTADDR_SHIFT ) &
+                     _USB_GNPTXFSIZ_NPTXFSTADDR_MASK                      );
+
+
+  /* Set Tx EP FIFO sizes for all IN ep's */
+  for ( j = 1; j <= MAX_NUM_TX_FIFOS; j++ )
+  {
+    for ( i = 1; i <= MAX_NUM_IN_EPS; i++ )
+    {
+      ep = USBD_GetEpFromAddr( USB_SETUP_DIR_MASK | i );
+      if ( ep )                             /* Is EP in use ? */
+      {
+        if ( ep->txFifoNum == j )           /* Is it correct FIFO number ? */
+        {
+          start += depth;
+          depth = EFM32_MAX( ep->fifoSize, MIN_EP_FIFO_SIZE_INWORDS );
+          USB_DIEPTXFS[ ep->txFifoNum - 1 ] =
+                              ( depth << _USB_DIEPTXF1_INEPNTXFDEP_SHIFT   ) |
+                              ( start &  _USB_DIEPTXF1_INEPNTXFSTADDR_MASK );
+        }
+      }
+    }
+  }
+
+  if ( totalRxFifoSize + totalTxFifoSize > MAX_DEVICE_FIFO_SIZE_INWORDS )
+    return USB_STATUS_ILLEGAL;
+
+  if ( start > MAX_DEVICE_FIFO_SIZE_INWORDS )
+    return USB_STATUS_ILLEGAL;
+
+  /* Flush the FIFO's */
+  USBHAL_FlushTxFifo( 0x10 );      /* All Tx FIFO's */
+  USBHAL_FlushRxFifo();            /* The Rx FIFO   */
+
+  return USB_STATUS_OK;
+}
+
+void USBDHAL_Disconnect( void )
+{
+  USB->DCTL = ( USB->DCTL & ~DCTL_WO_BITMASK ) | USB_DCTL_SFTDISCON;
+}
+
+void USBDHAL_AbortEpIn( USBD_Ep_TypeDef *ep )
+{
+  /* Clear epdis & inepnakeff INT's */
+  USB_DINEPS[ ep->num ].INT |= USB_DIEP_INT_EPDISBLD |
+                               USB_DIEP_INT_INEPNAKEFF;
+
+  /* Enable epdis & inepnakeff INT's */
+  USB->DIEPMSK |= USB_DIEPMSK_EPDISBLDMSK | USB_DIEPMSK_INEPNAKEFFMSK;
+  USB_DINEPS[ ep->num ].CTL = ( USB_DINEPS[ ep->num ].CTL  &
+                                ~DEPCTL_WO_BITMASK           ) |
+                              USB_DIEP_CTL_SNAK;
+
+  /* Wait for inepnakeff INT */
+  while ( !( USBDHAL_GetInEpInts( ep ) & USB_DIEP_INT_INEPNAKEFF ) ) {}
+  USB_DINEPS[ ep->num ].INT = USB_DIEP_INT_INEPNAKEFF;
+  USB->DIEPMSK &= ~USB_DIEPMSK_INEPNAKEFFMSK;
+
+  DEBUG_USB_INT_LO_PUTCHAR( '.' );
+
+  USBDHAL_SetEPDISNAK( ep );
+  /* Wait for epdis INT */
+  while ( !( USBDHAL_GetInEpInts( ep ) & USB_DIEP_INT_EPDISBLD ) ) {}
+  USB_DINEPS[ ep->num ].INT = USB_DIEP_INT_EPDISBLD;
+  USB->DIEPMSK &= ~USB_DIEPMSK_EPDISBLDMSK;
+  USBHAL_FlushTxFifo( ep->txFifoNum );
+
+  /* Clear any interrupts generated by the abort sequence. */
+  NVIC_ClearPendingIRQ( USB_IRQn );
+
+  DEBUG_USB_INT_LO_PUTCHAR( '.' );
+}
+
+void USBDHAL_AbortEpOut( USBD_Ep_TypeDef *ep )
+{
+  int cnt;
+
+  /* Clear epdis INT's */
+  USB_DOUTEPS[ ep->num ].INT |= USB_DOEP_INT_EPDISBLD;
+
+  /* Clear Global OUT NAK if already set */
+  USB->DCTL = ( USB->DCTL & ~DCTL_WO_BITMASK ) | USB_DCTL_CGOUTNAK;
+  USB->GINTMSK |= USB_GINTMSK_GOUTNAKEFFMSK;    /* Enable GOUTNAKEFF int */
+
+  /* Set Global OUT NAK */
+  USB->DCTL = ( USB->DCTL & ~DCTL_WO_BITMASK ) | USB_DCTL_SGOUTNAK;
+
+  /* Wait for goutnakeff */
+  cnt = EPABORT_BREAK_LOOP_COUNT;
+  while ( !( USB->GINTSTS & USB_GINTSTS_GOUTNAKEFF ) && cnt )
+  {
+    cnt--;
+  }
+
+  USB->GINTMSK &= ~USB_GINTMSK_GOUTNAKEFFMSK; /* Disable GOUTNAKEFF int  */
+  USB->DOEPMSK |= USB_DOEPMSK_EPDISBLDMSK;    /* Enable EPDIS interrupt  */
+
+  DEBUG_USB_INT_LO_PUTCHAR( ',' );
+
+  USBDHAL_SetEPDISNAK( ep );                  /* Disable ep */
+
+  /* Wait for epdis INT */
+  cnt = EPABORT_BREAK_LOOP_COUNT;
+  while ( !( USBDHAL_GetOutEpInts( ep ) & USB_DOEP_INT_EPDISBLD ) && cnt )
+  {
+    cnt--;
+  }
+
+  USB_DOUTEPS[ ep->num ].INT = USB_DOEP_INT_EPDISBLD;
+  USB->DOEPMSK &= ~USB_DOEPMSK_EPDISBLDMSK;     /* Disable EPDIS interrupt */
+
+  /* Clear Global OUT NAK */
+  USB->DCTL = ( USB->DCTL & ~DCTL_WO_BITMASK ) | USB_DCTL_CGOUTNAK;
+
+  /* Clear any interrupts generated by the abort sequence. */
+  NVIC_ClearPendingIRQ( USB_IRQn );
+
+  DEBUG_USB_INT_LO_PUTCHAR( ',' );
+}
+
+void USBDHAL_AbortAllEps( void )
+{
+  int i, cnt;
+  USBD_Ep_TypeDef *ep;
+  uint16_t im, om, inmask=0, outmask=0;
+
+  /* Clear epdis & inepnakeff INT's */
+  for ( i = 1; i <= NUM_EP_USED; i++ )
+  {
+    ep = &dev->ep[i];
+    if ( ep->state != D_EP_IDLE )
+    {
+      if ( ep->in )
+      {
+        inmask |= ep->mask;
+        USB_DINEPS[ ep->num ].INT |= USB_DIEP_INT_EPDISBLD |
+                                     USB_DIEP_INT_INEPNAKEFF;
+      }
+      else
+      {
+        outmask |= ep->mask;
+        USB_DOUTEPS[ ep->num ].INT |= USB_DOEP_INT_EPDISBLD;
+      }
+    }
+  }
+
+  if ( inmask )
+  {
+    /* Enable epdis & inepnakeff INT's */
+    USB->DIEPMSK |= USB_DIEPMSK_EPDISBLDMSK | USB_DIEPMSK_INEPNAKEFFMSK;
+
+    /* Set NAK on all IN ep's */
+    im = inmask;
+    for ( i = 1; i <= NUM_EP_USED; i++ )
+    {
+      ep = &dev->ep[i];
+      if ( im & ep->mask )
+      {
+        USB_DINEPS[ ep->num ].CTL = ( USB_DINEPS[ ep->num ].CTL &
+                                      ~DEPCTL_WO_BITMASK          ) |
+                                    USB_DIEP_CTL_SNAK;
+      }
+    }
+  }
+
+  if ( outmask )
+  {
+    /* Clear Global OUT NAK if already set */
+    USB->DCTL = ( USB->DCTL & ~DCTL_WO_BITMASK ) | USB_DCTL_CGOUTNAK;
+
+    USB->GINTMSK |= USB_GINTMSK_GOUTNAKEFFMSK;    /* Enable GOUTNAKEFF int */
+
+    /* Set Global OUT NAK */
+    USB->DCTL = ( USB->DCTL & ~DCTL_WO_BITMASK ) | USB_DCTL_SGOUTNAK;
+
+    /* Wait for goutnakeff */
+    cnt = EPABORT_BREAK_LOOP_COUNT;
+    while ( !( USB->GINTSTS & USB_GINTSTS_GOUTNAKEFF ) && cnt )
+    {
+      cnt--;
+    }
+    USB->GINTMSK &= ~USB_GINTMSK_GOUTNAKEFFMSK; /* Disable GOUTNAKEFF int  */
+    USB->DOEPMSK |= USB_DOEPMSK_EPDISBLDMSK;    /* Enable EPDIS interrupt  */
+  }
+
+  if ( inmask )
+  {
+    /* Wait for inepnakeff INT on all IN ep's */
+    im  = inmask;
+    cnt = EPABORT_BREAK_LOOP_COUNT;
+    do
+    {
+      for ( i = 1; i <= NUM_EP_USED; i++ )
+      {
+        ep = &dev->ep[i];
+        if ( im & ep->mask )
+        {
+          if ( USBDHAL_GetInEpInts( ep ) & USB_DIEP_INT_INEPNAKEFF )
+          {
+            USB_DINEPS[ ep->num ].INT = USB_DIEP_INT_INEPNAKEFF;
+            im &= ~ep->mask;
+          }
+        }
+      }
+      cnt--;
+    } while ( im && cnt );
+    USB->DIEPMSK &= ~USB_DIEPMSK_INEPNAKEFFMSK;
+  }
+
+  DEBUG_USB_INT_LO_PUTCHAR( '\'' );
+
+  /* Disable ep's */
+  for ( i = 1; i <= NUM_EP_USED; i++ )
+  {
+    ep = &dev->ep[i];
+    if ( ep->state != D_EP_IDLE )
+    {
+      USBDHAL_SetEPDISNAK( ep );
+    }
+  }
+
+  /* Wait for epdis INT */
+  im  = inmask;
+  om  = outmask;
+  cnt = EPABORT_BREAK_LOOP_COUNT;
+  do
+  {
+    for ( i = 1; i <= NUM_EP_USED; i++ )
+    {
+      ep = &dev->ep[i];
+      if ( ep->in && ( im & ep->mask ) )
+      {
+        if ( USBDHAL_GetInEpInts( ep ) & USB_DIEP_INT_EPDISBLD )
+        {
+          USB_DINEPS[ ep->num ].INT = USB_DIEP_INT_EPDISBLD;
+          im &= ~ep->mask;
+        }
+      }
+
+      if ( !ep->in && ( om & ep->mask ) )
+      {
+        if ( USBDHAL_GetOutEpInts( ep ) & USB_DOEP_INT_EPDISBLD )
+        {
+          USB_DOUTEPS[ ep->num ].INT = USB_DOEP_INT_EPDISBLD;
+          om &= ~ep->mask;
+        }
+      }
+    }
+    cnt--;
+  } while ( ( im || om ) && cnt );
+
+  if ( inmask )
+  {
+    USB->DIEPMSK &= ~USB_DIEPMSK_EPDISBLDMSK;     /* Disable EPDIS interrupt */
+    USBHAL_FlushTxFifo( 0x10 );                   /* Flush all Tx FIFO's     */
+  }
+
+  if ( outmask )
+  {
+    USB->DOEPMSK &= ~USB_DOEPMSK_EPDISBLDMSK;     /* Disable EPDIS interrupt */
+    /* Clear Global OUT NAK */
+    USB->DCTL = ( USB->DCTL & ~DCTL_WO_BITMASK ) | USB_DCTL_CGOUTNAK;
+  }
+
+  DEBUG_USB_INT_LO_PUTCHAR( '\'' );
+}
+
+void USBDHAL_AbortAllTransfers( USB_Status_TypeDef reason )
+{
+  int i;
+  USBD_Ep_TypeDef *ep;
+  USB_XferCompleteCb_TypeDef callback;
+
+  if ( reason != USB_STATUS_DEVICE_RESET )
+  {
+    USBDHAL_AbortAllEps();
+  }
+
+  for ( i = 1; i <= NUM_EP_USED; i++ )
+  {
+    ep = &(dev->ep[i]);
+    if ( ep->state != D_EP_IDLE )
+    {
+      ep->state = D_EP_IDLE;
+      if ( ep->xferCompleteCb )
+      {
+        callback = ep->xferCompleteCb;
+        ep->xferCompleteCb = NULL;
+
+        if ( ( dev->lastState == USBD_STATE_CONFIGURED ) &&
+             ( dev->state     == USBD_STATE_ADDRESSED  )    )
+        {
+          USBDHAL_DeactivateEp( ep );
+        }
+
+        DEBUG_TRACE_ABORT( reason );
+        callback( reason, ep->xferred, ep->remaining );
+      }
+    }
+  }
+
+  /* Clear any interrupts generated by the abort sequence. */
+  NVIC_ClearPendingIRQ( USB_IRQn );
+}
+#endif /* defined( USB_DEVICE ) */
+
+#if defined( USB_HOST )
+USB_Status_TypeDef USBHHAL_CoreInit( uint32_t rxFifoSize,
+                                     uint32_t nptxFifoSize,
+                                     uint32_t ptxFifoSize )
+{
+  uint8_t i;
+
+  rxFifoSize   /= 4;              /* Convert from byte count to word count.  */
+  nptxFifoSize /= 4;
+  ptxFifoSize  /= 4;
+
+  CMU_ClockEnable( cmuClock_GPIO, true );
+  GPIO_PinModeSet( gpioPortF, 5, gpioModePushPull, 0 ); /* Enable VBUSEN pin */
+
+#if ( USB_VBUSOVRCUR_PORT != USB_VBUSOVRCUR_PORT_NONE )
+  /* Enable VBUS overcurrent flag pin. */
+  GPIO_PinModeSet( USB_VBUSOVRCUR_PORT, USB_VBUSOVRCUR_PIN, gpioModeInput, 0 );
+#endif
+
+  USB->ROUTE = USB_ROUTE_PHYPEN | USB_ROUTE_VBUSENPEN;  /* Enable PHY pins.  */
+  USBHAL_CoreReset();                                   /* Reset USB core    */
+
+  /* Force Host Mode */
+  USB->GUSBCFG = ( USB->GUSBCFG                                     &
+                   ~(GUSBCFG_WO_BITMASK | USB_GUSBCFG_FORCEDEVMODE )  ) |
+                 USB_GUSBCFG_FORCEHSTMODE;
+
+  INT_Enable();
+  USBTIMER_DelayMs( 100 );
+  INT_Disable();
+
+  /* Set 48 MHz PHY clock, FS/LS mode */
+  USB->HCFG = ( USB->HCFG & ~_USB_HCFG_FSLSPCLKSEL_MASK ) |
+              ( 1 << _USB_HCFG_FSLSPCLKSEL_SHIFT        ) |
+              ( USB_HCFG_FSLSSUPP                       );
+
+  USB->GAHBCFG = ( USB->GAHBCFG & ~_USB_GAHBCFG_HBSTLEN_MASK ) |
+                 USB_GAHBCFG_DMAEN | USB_GAHBCFG_HBSTLEN_INCR;
+
+  /* Set Rx FIFO size */
+  USB->GRXFSIZ = ( rxFifoSize << _USB_GRXFSIZ_RXFDEP_SHIFT ) &
+                 _USB_GRXFSIZ_RXFDEP_MASK;
+
+  /* Set Tx FIFO sizes */
+  USB->GNPTXFSIZ = ( ( nptxFifoSize <<
+                       _USB_GNPTXFSIZ_NPTXFINEPTXF0DEP_SHIFT ) &
+                     _USB_GNPTXFSIZ_NPTXFINEPTXF0DEP_MASK        ) |
+                   ( ( rxFifoSize <<
+                       _USB_GNPTXFSIZ_NPTXFSTADDR_SHIFT      ) &
+                     _USB_GNPTXFSIZ_NPTXFSTADDR_MASK             );
+
+  USB->HPTXFSIZ  = ( ( ptxFifoSize  << _USB_HPTXFSIZ_PTXFSIZE_SHIFT   ) &
+                     _USB_HPTXFSIZ_PTXFSIZE_MASK                          ) |
+                   ( ( ( rxFifoSize + nptxFifoSize )
+                                    << _USB_HPTXFSIZ_PTXFSTADDR_SHIFT ) &
+                     _USB_HPTXFSIZ_PTXFSTADDR_MASK                        );
+
+  /* Flush Tx and Rx FIFO's */
+  USBHAL_FlushTxFifo( 0x10 );
+  USBHAL_FlushRxFifo();
+
+  for ( i = 0; i < MAX_NUM_HOSTCHANNELS; i++ )
+  {
+    USB->HC[ i ].CHAR = USB_HC_CHAR_CHDIS;      /* Disable channel          */
+    USB->HC[ i ].INT = 0xFFFFFFFF;              /* Clear pending interrupts */
+  }
+
+  /* Enable and halt all channels */
+  for ( i = 0; i < MAX_NUM_HOSTCHANNELS; i++ )
+  {
+    USB->HC[ i ].CHAR |= USB_HC_CHAR_CHDIS | USB_HC_CHAR_CHENA;
+    do
+    {
+      __NOP(); __NOP(); __NOP(); __NOP(); __NOP(); __NOP();
+    }
+    while ( USB->HC[ i ].CHAR & USB_HC_CHAR_CHENA );
+  }
+
+  /* Disable all interrupts */
+  for ( i = 0; i < MAX_NUM_HOSTCHANNELS; i++ )
+  {
+    USB->HC[ i ].INTMSK = 0;
+  }
+
+  USB->HAINTMSK = 0;
+
+  return USB_STATUS_OK;
+}
+
+void USBHHAL_HCHalt( int hcnum, uint32_t hcchar )
+{
+  hcchar |= USB_HC_CHAR_CHENA | USB_HC_CHAR_CHDIS;
+  USB->HC[ hcnum ].CHAR = hcchar;
+}
+
+void USBHHAL_HCInit( int hcnum )
+{
+  USBH_Ep_TypeDef *ep;
+
+  ep = hcs[ hcnum ].ep;
+  USB->HC[ hcnum ].INT = 0xFFFFFFFF;      /* Clear all interrupt flags      */
+
+  switch ( ep->type )                     /* Enable host channel int. types */
+  {
+    case USB_EPTYPE_CTRL:
+    case USB_EPTYPE_BULK:
+    case USB_EPTYPE_INTR:
+      USB->HC[ hcnum ].INTMSK = USB_HC_INT_CHHLTD;
+      break;
+  }
+
+  hcs[ hcnum ].errorCnt = 0;
+
+  USB->HAINTMSK |= 1 << hcnum;            /* Enable host channel interrupt  */
+
+  USB->HC[ hcnum ].CHAR =                 /* Program HCCHAR register        */
+      ( ep->parentDevice->addr     <<   _USB_HC_CHAR_DEVADDR_SHIFT     ) |
+      ( ( ep->addr & USB_EPNUM_MASK ) << _USB_HC_CHAR_EPNUM_SHIFT      ) |
+      ( ep->type                   <<   _USB_HC_CHAR_EPTYPE_SHIFT      ) |
+      ( ep->packetSize             <<   _USB_HC_CHAR_MPS_SHIFT         ) |
+      ( ep->in                      ?   USB_HC_CHAR_EPDIR         : 0  ) |
+      ( ep->parentDevice->speed ==
+                           HPRT_L_SPEED >> _USB_HPRT_PRTSPD_SHIFT
+                                    ?   USB_HC_CHAR_LSPDDEV       : 0  );
+}
+
+void USBHHAL_HCStart( int hcnum )
+{
+  USBH_Hc_TypeDef *hc;
+  uint16_t packets, len;
+
+  hc = &hcs[ hcnum ];
+  hc->status = 0;
+  hc->idle = false;
+
+  if ( hc->remaining > 0 )
+  {
+    packets = ( hc->remaining + hc->ep->packetSize - 1 ) / hc->ep->packetSize;
+  }
+  else
+  {
+    packets = 1;
+  }
+
+  if ( hc->ep->in )
+  {
+    len = packets * hc->ep->packetSize;
+  }
+  else
+  {
+    len = hc->remaining;
+  }
+
+  /* Initialize the HCTSIZn register */
+  hc->hwXferSize = len;
+  USB->HC[ hcnum ].TSIZ =
+          ( ( len             << _USB_HC_TSIZ_XFERSIZE_SHIFT ) &
+                                 _USB_HC_TSIZ_XFERSIZE_MASK       ) |
+          ( ( packets         << _USB_HC_TSIZ_PKTCNT_SHIFT   ) &
+                                 _USB_HC_TSIZ_PKTCNT_MASK         ) |
+          ( ( hc->ep->toggle  << _USB_HC_TSIZ_PID_SHIFT      ) &
+                                 _USB_HC_TSIZ_PID_MASK            );
+
+  USB->HC[ hcnum ].DMAADDR = (uint32_t)hc->buf;
+
+  USBHHAL_HCActivate( hcnum,
+                      USB->HC[ hcnum ].CHAR,
+                      hc->ep->type == USB_EPTYPE_INTR );
+}
+#endif /* defined( USB_HOST ) */
+
+/** @endcond */
+
+#endif /* defined( USB_DEVICE ) || defined( USB_HOST ) */
+#endif /* defined( USB_PRESENT ) && ( USB_COUNT == 1 ) */