Revision 0:a90a8367fa4c, committed 2016-05-19

Comitter:

AndreaP

Date:

Thu May 19 11:35:40 2016 +0000

Commit message:

.

Changed in this revision

diff -r 000000000000 -r a90a8367fa4c BLE_API.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API.lib	Thu May 19 11:35:40 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/teams/Bluetooth-Low-Energy/code/BLE_API/#66159681aa21

diff -r 000000000000 -r a90a8367fa4c main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu May 19 11:35:40 2016 +0000
@@ -0,0 +1,93 @@
+#include "mbed.h"
+#include "nRF5xGap.h" 
+#include "InterruptManager.h"
+#include "nrf_gpio.h"
+ 
+DigitalOut greenLed(P0_21);
+DigitalOut blueLed(P0_22);
+DigitalOut redLed(P0_23);
+
+#define LED_ON  0
+#define LED_OFF 1
+
+#define BTN_PRESSED 0 
+#define BTN_RELEASED 1 
+
+/*
+void RTC1_IRQHandler(void)
+{
+    if(NRF_RTC1->EVENTS_COMPARE[0] != 0) {
+        NRF_RTC1->EVENTS_COMPARE[0] = 0;
+        
+        NRF_RTC1->TASKS_CLEAR = 1;
+    }
+    
+}
+void rtc_handler(void)
+{
+    
+}
+*/
+
+void GPIOTE_IRQHandler(void)
+{
+    // This handler will be run after wakeup from system ON (GPIO wakeup) 
+    if(NRF_GPIOTE->EVENTS_PORT) 
+    { 
+        NRF_GPIOTE->EVENTS_PORT = 0; 
+        blueLed = LED_ON;
+        printf("P2 Premuto\r\n");
+    } 
+}
+
+//int RTC1_PRESCALER = 0;
+//int RTC1_CC0 = 100;
+
+int main() {
+
+    blueLed = LED_OFF;
+    greenLed = LED_OFF;
+    redLed = LED_OFF;
+
+    printf("\r\nInit\r\n");
+
+    //NRF_POWER->SYSTEMOFF=0;               //power ON
+    
+    //NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE0_Msk;
+    //NRF_RTC1->PRESCALER = RTC1_PRESCALER;
+    //NRF_RTC1->CC[0] = RTC1_CC0;
+    
+    //NVIC_EnableIRQ(RTC1_IRQn);
+    
+    //InterruptManager::get()->add_handler(rtc_handler, RTC1_IRQn);
+
+    // Configure BUTTON0 as a regular input 
+    nrf_gpio_cfg_input(p16, NRF_GPIO_PIN_PULLUP); 
+    
+    // Configure BUTTON 2 with SENSE enabled so that CPU is enabled (exit System-On low power mode) when pressing Button 2 
+    nrf_gpio_cfg_sense_input(p17, NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW); 
+    
+    blueLed = LED_ON;
+
+    NRF_GPIOTE->INTENSET = GPIOTE_INTENSET_PORT_Msk;
+    NVIC_EnableIRQ(GPIOTE_IRQn);
+    //InterruptManager::get()->add_handler(p1_handler, GPIOTE_IRQn);
+    
+    
+    while(1) 
+    {      
+         // If BUTTON 1 is pressed.. 
+         if(nrf_gpio_pin_read(p16) == BTN_PRESSED) 
+         { 
+            printf("P1 Premuto\r\n");
+            blueLed = LED_OFF;
+            // Enter CONSTLAT mode if desired, otherwise LOWPWR mode will be used (LOWPWR is recommended for most applications) 
+            //NRF_POWER->TASKS_CONSTLAT = 1; 
+              
+            // Enter System ON sleep mode 
+            __WFE(); 
+            __SEV(); 
+            __WFE(); 
+        } 
+    } 
+}

diff -r 000000000000 -r a90a8367fa4c mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Thu May 19 11:35:40 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/7c328cabac7e
\ No newline at end of file

diff -r 000000000000 -r a90a8367fa4c nRF51822.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nRF51822.lib	Thu May 19 11:35:40 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/teams/Nordic-Semiconductor/code/nRF51822/#f7faad332abc