Alex Smith
Code to take GPS, Accelerometer and Compass readings and print to USB for data analysis.
Dependencies: CMPS03 FatFileSystemCpp GPS MMA7660 mbed C12832_lcd
Diff: USBHostLite/usbhost_ms.cpp
- Revision:
- 0:2557081b4322
diff -r 000000000000 -r 2557081b4322 USBHostLite/usbhost_ms.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHostLite/usbhost_ms.cpp Wed May 07 09:49:54 2014 +0000
@@ -0,0 +1,455 @@
+/*
+**************************************************************************************************************
+* NXP USB Host Stack
+*
+* (c) Copyright 2008, NXP SemiConductors
+* (c) Copyright 2008, OnChip Technologies LLC
+* All Rights Reserved
+*
+* www.nxp.com
+* www.onchiptech.com
+*
+* File : usbhost_ms.c
+* Programmer(s) : Ravikanth.P
+* Version :
+*
+**************************************************************************************************************
+*/
+
+/*
+**************************************************************************************************************
+* INCLUDE HEADER FILES
+**************************************************************************************************************
+*/
+
+#include "usbhost_ms.h"
+
+/*
+**************************************************************************************************************
+* GLOBAL VARIABLES
+**************************************************************************************************************
+*/
+
+USB_INT32U MS_BlkSize;
+
+/*
+**************************************************************************************************************
+* INITIALIZE MASS STORAGE INTERFACE
+*
+* Description: This function initializes the mass storage interface
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_Init (USB_INT32U *blkSize, USB_INT32U *numBlks, USB_INT08U *inquiryResult)
+{
+ USB_INT08U retry;
+ USB_INT32S rc;
+
+ MS_GetMaxLUN(); /* Get maximum logical unit number */
+ retry = 80;
+ while(retry) {
+ rc = MS_TestUnitReady(); /* Test whether the unit is ready */
+ if (rc == OK) {
+ break;
+ }
+ MS_GetSenseInfo(); /* Get sense information */
+ retry--;
+ }
+ if (rc != OK) {
+ PRINT_Err(rc);
+ return (rc);
+ }
+ rc = MS_ReadCapacity(numBlks, blkSize); /* Read capacity of the disk */
+ MS_BlkSize = *blkSize; // Set global
+ rc = MS_Inquire (inquiryResult);
+ return (rc);
+}
+/*
+**************************************************************************************************************
+* PARSE THE CONFIGURATION
+*
+* Description: This function is used to parse the configuration
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_ParseConfiguration (void)
+{
+ volatile USB_INT08U *desc_ptr;
+ USB_INT08U ms_int_found;
+
+
+ desc_ptr = TDBuffer;
+ ms_int_found = 0;
+
+ if (desc_ptr[1] != USB_DESCRIPTOR_TYPE_CONFIGURATION) {
+ return (ERR_BAD_CONFIGURATION);
+ }
+ desc_ptr += desc_ptr[0];
+
+ while (desc_ptr != TDBuffer + ReadLE16U(&TDBuffer[2])) {
+
+ switch (desc_ptr[1]) {
+
+ case USB_DESCRIPTOR_TYPE_INTERFACE: /* If it is an interface descriptor */
+ if (desc_ptr[5] == MASS_STORAGE_CLASS && /* check if the class is mass storage */
+ desc_ptr[6] == MASS_STORAGE_SUBCLASS_SCSI && /* check if the subclass is SCSI */
+ desc_ptr[7] == MASS_STORAGE_PROTOCOL_BO) { /* check if the protocol is Bulk only */
+ ms_int_found = 1;
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ }
+ break;
+
+ case USB_DESCRIPTOR_TYPE_ENDPOINT: /* If it is an endpoint descriptor */
+ if ((desc_ptr[3] & 0x03) == 0x02) { /* If it is Bulk endpoint */
+ if (desc_ptr[2] & 0x80) { /* If it is In endpoint */
+ EDBulkIn->Control = 1 | /* USB address */
+ ((desc_ptr[2] & 0x7F) << 7) | /* Endpoint address */
+ (2 << 11) | /* direction */
+ (ReadLE16U(&desc_ptr[4]) << 16); /* MaxPkt Size */
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ } else { /* If it is Out endpoint */
+ EDBulkOut->Control = 1 | /* USB address */
+ ((desc_ptr[2] & 0x7F) << 7) | /* Endpoint address */
+ (1 << 11) | /* direction */
+ (ReadLE16U(&desc_ptr[4]) << 16); /* MaxPkt Size */
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ }
+ } else { /* If it is not bulk end point */
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ }
+ break;
+
+ default: /* If the descriptor is neither interface nor endpoint */
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ break;
+ }
+ }
+ if (ms_int_found) {
+ PRINT_Log("Mass Storage device connected\n");
+ return (OK);
+ } else {
+ PRINT_Log("Not a Mass Storage device\n");
+ return (ERR_NO_MS_INTERFACE);
+ }
+}
+
+/*
+**************************************************************************************************************
+* GET MAXIMUM LOGICAL UNIT
+*
+* Description: This function returns the maximum logical unit from the device
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_GetMaxLUN (void)
+{
+ USB_INT32S rc;
+
+
+ rc = Host_CtrlRecv(USB_DEVICE_TO_HOST | USB_REQUEST_TYPE_CLASS | USB_RECIPIENT_INTERFACE,
+ MS_GET_MAX_LUN_REQ,
+ 0,
+ 0,
+ 1,
+ TDBuffer);
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* GET SENSE INFORMATION
+*
+* Description: This function is used to get sense information from the device
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERROR if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_GetSenseInfo (void)
+{
+ USB_INT32S rc;
+
+
+ Fill_MSCommand(0, 0, 0, MS_DATA_DIR_IN, SCSI_CMD_REQUEST_SENSE, 6);
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, 18);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* TEST UNIT READY
+*
+* Description: This function is used to test whether the unit is ready or not
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERROR if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_TestUnitReady (void)
+{
+ USB_INT32S rc;
+
+
+ Fill_MSCommand(0, 0, 0, MS_DATA_DIR_NONE, SCSI_CMD_TEST_UNIT_READY, 6);
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* READ CAPACITY
+*
+* Description: This function is used to read the capacity of the mass storage device
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERROR if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_ReadCapacity (USB_INT32U *numBlks, USB_INT32U *blkSize)
+{
+ USB_INT32S rc;
+
+
+ Fill_MSCommand(0, 0, 0, MS_DATA_DIR_IN, SCSI_CMD_READ_CAPACITY, 10);
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, 8);
+ if (rc == OK) {
+ if (numBlks)
+ *numBlks = ReadBE32U(&TDBuffer[0]);
+ if (blkSize)
+ *blkSize = ReadBE32U(&TDBuffer[4]);
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+
+
+USB_INT32S MS_Inquire (USB_INT08U *response)
+{
+ USB_INT32S rc;
+ USB_INT32U i;
+
+ Fill_MSCommand(0, 0, 0, MS_DATA_DIR_IN, SCSI_CMD_INQUIRY, 6);
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, INQUIRY_LENGTH);
+ if (rc == OK) {
+ if (response) {
+ for ( i = 0; i < INQUIRY_LENGTH; i++ )
+ *response++ = *TDBuffer++;
+#if 0
+ MemCpy (response, TDBuffer, INQUIRY_LENGTH);
+ StrNullTrailingSpace (response->vendorID, SCSI_INQUIRY_VENDORCHARS);
+ StrNullTrailingSpace (response->productID, SCSI_INQUIRY_PRODUCTCHARS);
+ StrNullTrailingSpace (response->productRev, SCSI_INQUIRY_REVCHARS);
+#endif
+ }
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) { // bCSWStatus byte
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* RECEIVE THE BULK DATA
+*
+* Description: This function is used to receive the bulk data
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_BulkRecv ( USB_INT32U block_number,
+ USB_INT16U num_blocks,
+ volatile USB_INT08U *user_buffer)
+{
+ USB_INT32S rc;
+ int i;
+ volatile USB_INT08U *c = user_buffer;
+ for (i=0;i<MS_BlkSize*num_blocks;i++)
+ *c++ = 0;
+
+
+ Fill_MSCommand(block_number, MS_BlkSize, num_blocks, MS_DATA_DIR_IN, SCSI_CMD_READ_10, 10);
+
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, user_buffer, MS_BlkSize * num_blocks);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* SEND BULK DATA
+*
+* Description: This function is used to send the bulk data
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_BulkSend ( USB_INT32U block_number,
+ USB_INT16U num_blocks,
+ volatile USB_INT08U *user_buffer)
+{
+ USB_INT32S rc;
+
+
+ Fill_MSCommand(block_number, MS_BlkSize, num_blocks, MS_DATA_DIR_OUT, SCSI_CMD_WRITE_10, 10);
+
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, user_buffer, MS_BlkSize * num_blocks);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* FILL MASS STORAGE COMMAND
+*
+* Description: This function is used to fill the mass storage command
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+void Fill_MSCommand (USB_INT32U block_number,
+ USB_INT32U block_size,
+ USB_INT16U num_blocks,
+ MS_DATA_DIR direction,
+ USB_INT08U scsi_cmd,
+ USB_INT08U scsi_cmd_len)
+{
+ USB_INT32U data_len;
+ static USB_INT32U tag_cnt = 0;
+ USB_INT32U cnt;
+
+
+ for (cnt = 0; cnt < CBW_SIZE; cnt++) {
+ TDBuffer[cnt] = 0;
+ }
+ switch(scsi_cmd) {
+
+ case SCSI_CMD_TEST_UNIT_READY:
+ data_len = 0;
+ break;
+ case SCSI_CMD_READ_CAPACITY:
+ data_len = 8;
+ break;
+ case SCSI_CMD_REQUEST_SENSE:
+ data_len = 18;
+ break;
+ case SCSI_CMD_INQUIRY:
+ data_len = 36;
+ break;
+ default:
+ data_len = block_size * num_blocks;
+ break;
+ }
+ WriteLE32U(TDBuffer, CBW_SIGNATURE);
+ WriteLE32U(&TDBuffer[4], tag_cnt);
+ WriteLE32U(&TDBuffer[8], data_len);
+ TDBuffer[12] = (direction == MS_DATA_DIR_NONE) ? 0 : direction;
+ TDBuffer[14] = scsi_cmd_len; /* Length of the CBW */
+ TDBuffer[15] = scsi_cmd;
+ if ((scsi_cmd == SCSI_CMD_REQUEST_SENSE)
+ || (scsi_cmd == SCSI_CMD_INQUIRY)) {
+ TDBuffer[19] = (USB_INT08U)data_len;
+ } else {
+ WriteBE32U(&TDBuffer[17], block_number);
+ }
+ WriteBE16U(&TDBuffer[22], num_blocks);
+}