![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
SmartMesh QSL for STM32F4 version
Fork of COG-AD4050_QSL by
dn_uart.cpp
- Committer:
- APS_Lab
- Date:
- 2018-05-02
- Revision:
- 0:8ca1e814a851
- Child:
- 1:b909b8399252
File content as of revision 0:8ca1e814a851:
/* Copyright (c) 2016, Dust Networks. All rights reserved. Port of the uart module to the NUCLEO-L053R8. \license See attached DN_LICENSE.txt. */ #include "dn_uart.h" #include "dn_ipmt.h" #include "dn_debug.h" #include "mbed.h" //=========================== defines ========================================= // Set correct pins for external UART on your board (USART1 for NUCLEO-L053R8) #define UART_MOTE_TX USBTX #define UART_MOTE_RX USBRX //=========================== variables ======================================= typedef struct { dn_uart_rxByte_cbt ipmt_uart_rxByte_cb; } dn_uart_vars_t; static dn_uart_vars_t dn_uart_vars; static Serial serialMote(UART_MOTE_TX, UART_MOTE_RX); //=========================== prototypes ====================================== void moteRXinterrupt(void); //=========================== public ========================================== void dn_uart_init(dn_uart_rxByte_cbt rxByte_cb) { // Store RX callback function dn_uart_vars.ipmt_uart_rxByte_cb = rxByte_cb; /* Default configuration for Serial: - 8 bit character size - No Parity - 1 bit stop bit - No flow control - 9600 baudrate Hence, we only need to change the baudrate */ serialMote.baud(115200); // Attach RX interrupt handler serialMote.attach(&moteRXinterrupt, Serial::RxIrq); //debug("SMIP Serial Initialized"); } void dn_uart_txByte(uint8_t byte) { serialMote.putc(byte); } void dn_uart_txFlush() { // Nothing to do since we push byte-by-byte } //=========================== private ========================================= //=========================== helpers ========================================= //=========================== interrupt handlers ============================== void moteRXinterrupt(void) { while (serialMote.readable()) { dn_uart_vars.ipmt_uart_rxByte_cb(serialMote.getc()); } }