Jake Greaves
/
AdiSense1000_V21
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Embed:
(wiki syntax)
adi_sense_1000.c File Reference
: ADISENSE API implementation for ADSNS1000 ----------------------------------------------------------------------------- More...
Go to the source code of this file.
Functions | |
| ADI_SENSE_RESULT | adi_sense_Open (unsigned const nDeviceIndex, ADI_SENSE_CONNECTION *const pConnectionInfo, ADI_SENSE_DEVICE_HANDLE *const phDevice) |
| Open ADISENSE device handle and set up communication interface. | |
| ADI_SENSE_RESULT | adi_sense_GetGpioState (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_GPIO_PIN const ePinId, bool_t *const pbAsserted) |
| Get the current state of the specified GPIO input signal. | |
| ADI_SENSE_RESULT | adi_sense_RegisterGpioCallback (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_GPIO_PIN const ePinId, ADI_SENSE_GPIO_CALLBACK const callbackFunction, void *const pCallbackParam) |
| Register an application-defined callback function for GPIO interrupts. | |
| ADI_SENSE_RESULT | adi_sense_Reset (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Reset the ADISENSE device. | |
| ADI_SENSE_RESULT | adi_sense_GetStatus (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_STATUS *const pStatus) |
| Get general status of ADISense module. | |
| ADI_SENSE_RESULT | adi_sense_GetCommandRunningState (ADI_SENSE_DEVICE_HANDLE hDevice, bool_t *pbCommandRunning) |
| Check if a command is currently running on the device. | |
| ADI_SENSE_RESULT | adi_sense_Shutdown (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Trigger a shut down of the device. | |
| ADI_SENSE_RESULT | adi_sense_ApplyConfigUpdates (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Apply the configuration settings currently stored in device registers. | |
| ADI_SENSE_RESULT | adi_sense_StartMeasurement (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_MEASUREMENT_MODE const eMeasurementMode) |
| Start a measurement cycle. | |
| ADI_SENSE_RESULT | adi_sense_SaveConfig (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_USER_CONFIG_SLOT const eSlotId) |
| Store the configuration settings to persistent memory on the device. | |
| ADI_SENSE_RESULT | adi_sense_RestoreConfig (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_USER_CONFIG_SLOT const eSlotId) |
| Restore configuration settings from persistent memory on the device. | |
| ADI_SENSE_RESULT | adi_sense_EraseExternalFlash (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Erases the external flash memory. | |
| ADI_SENSE_RESULT | adi_sense_GetExternalFlashSampleCount (ADI_SENSE_DEVICE_HANDLE const hDevice, uint32_t *nSampleCount) |
| Gets the number of samples stored in the external flash memory. | |
| ADI_SENSE_RESULT | adi_sense_GetExternalFlashData (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_DATA_SAMPLE *const pSamples, uint32_t const nStartIndex, uint32_t const nRequested, uint32_t *const pnReturned) |
| Read measurement samples stored in the the external flash memory. | |
| ADI_SENSE_RESULT | adi_sense_SaveLutData (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Store the LUT data to persistent memory on the device. | |
| ADI_SENSE_RESULT | adi_sense_RestoreLutData (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Restore LUT data from persistent memory on the device. | |
| ADI_SENSE_RESULT | adi_sense_StopMeasurement (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Stop the measurement cycles on the device. | |
| ADI_SENSE_RESULT | adi_sense_RunDiagnostics (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Run built-in diagnostic checks on the device. | |
| ADI_SENSE_RESULT | adi_sense_RunCalibration (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Run built-in calibration on the device. | |
| ADI_SENSE_RESULT | adi_sense_RunDigitalCalibration (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Run built-in digital calibration on the device. | |
| ADI_SENSE_RESULT | adi_sense_GetData (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_MEASUREMENT_MODE const eMeasurementMode, ADI_SENSE_DATA_SAMPLE *const pSamples, uint8_t const nBytesPerSample, uint32_t const nRequested, uint32_t *const pnReturned) |
| Read measurement data samples from the device registers. | |
| ADI_SENSE_RESULT | adi_sense_Close (ADI_SENSE_DEVICE_HANDLE const hDevice) |
| Close ADISENSE device context and free resources. | |
| ADI_SENSE_RESULT | adi_sense_1000_WriteRegister (ADI_SENSE_DEVICE_HANDLE hDevice, uint16_t nAddress, void *pData, unsigned nLength) |
| Write one or more device registers at the specified register address. | |
| ADI_SENSE_RESULT | adi_sense_1000_ReadRegister (ADI_SENSE_DEVICE_HANDLE hDevice, uint16_t nAddress, void *pData, unsigned nLength) |
| Read one or more device registers at the specified register address. | |
| ADI_SENSE_RESULT | adi_sense_GetDeviceReadyState (ADI_SENSE_DEVICE_HANDLE const hDevice, bool_t *const bReady) |
| Check if the device is ready, following power-up or a reset. | |
| ADI_SENSE_RESULT | adi_sense_1000_GetDataReadyModeInfo (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_MEASUREMENT_MODE const eMeasurementMode, ADI_SENSE_1000_OPERATING_MODE *const peOperatingMode, ADI_SENSE_1000_DATAREADY_MODE *const peDataReadyMode, uint32_t *const pnSamplesPerDataready, uint32_t *const pnSamplesPerCycle, uint8_t *const pnBytesPerSample) |
| Get the number of samples available when DATAREADY status is asserted. | |
| ADI_SENSE_RESULT | adi_sense_GetProductID (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_PRODUCT_ID *pProductId) |
| Obtain the product ID from the device. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetPowerConfig (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_1000_POWER_CONFIG *pPowerConfig) |
| Update power configuration settings on the device. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetMeasurementConfig (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_1000_MEASUREMENT_CONFIG *pMeasConfig) |
| Update measurement configuration settings on the device. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetDiagnosticsConfig (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_1000_DIAGNOSTICS_CONFIG *pDiagnosticsConfig) |
| Update diagnostics configuration settings on the device. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetChannelCount (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_1000_CHANNEL_ID eChannelId, uint32_t nMeasurementsPerCycle) |
| Update number of measurements-per-cycle for a specific channel. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetChannelThresholdLimits (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_1000_CHANNEL_ID eChannelId, float32_t fHighThresholdLimit, float32_t fLowThresholdLimit) |
| Update the measurement threshold limits for a specified channel. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetSensorParameter (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_1000_CHANNEL_ID eChannelId, float32_t fSensorParam) |
| Set a sensor specific parameter for a specified channel. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetChannelSettlingTime (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_1000_CHANNEL_ID eChannelId, uint32_t nSettlingTime) |
| Update the extra settling time for a specified channel. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetChannelConfig (ADI_SENSE_DEVICE_HANDLE hDevice, ADI_SENSE_1000_CHANNEL_ID eChannelId, ADI_SENSE_1000_CHANNEL_CONFIG *pChannelConfig) |
| Update channel configuration settings for a specific channel. | |
| ADI_SENSE_RESULT | adi_sense_SetConfig (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_CONFIG *const pConfig) |
| Write full configuration settings to the device registers. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetLutData (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_1000_LUT *const pLutData) |
| Write Look-Up Table data to the device memory. | |
| ADI_SENSE_RESULT | adi_sense_1000_SetLutDataRaw (ADI_SENSE_DEVICE_HANDLE const hDevice, ADI_SENSE_1000_LUT_RAW *const pLutData) |
| Write Look-Up Table raw data to the device memory. | |
| ADI_SENSE_RESULT | adi_sense_1000_AssembleLutData (ADI_SENSE_1000_LUT *pLutBuffer, unsigned nLutBufferSize, unsigned const nNumTables, ADI_SENSE_1000_LUT_DESCRIPTOR *const ppDesc[], ADI_SENSE_1000_LUT_TABLE_DATA *const ppData[]) |
| Assemble a list of separate Look-Up Tables into a single buffer. | |
Detailed Description
: ADISENSE API implementation for ADSNS1000 -----------------------------------------------------------------------------
Definition in file adi_sense_1000.c.
Generated on Tue Jul 12 2022 18:59:24 by
1.7.2