![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
d
Dependencies: BME280 DOGS102 DS1820 MMA845x_timmeh MTS-Serial libmDot_Australia915Mhz mbed-rtos mbed
Fork of mDot_TTN_OTAA_Node by
Diff: main.cpp
- Revision:
- 3:367aa95f9771
- Parent:
- 2:9db840d12557
- Child:
- 4:f649ab1b61d1
diff -r 9db840d12557 -r 367aa95f9771 main.cpp --- a/main.cpp Mon Sep 21 18:45:15 2015 +0000 +++ b/main.cpp Tue Sep 22 13:58:59 2015 +0000 @@ -1,4 +1,6 @@ /** mDot_DS18B20 - Simple mDot temperature sensor using Dallas Semiconductors DS18B20 OneWire temperature sensor. + * It used the OTA_AUTO join mode using saved parameters. If the config is to be reset then pin A2 on the + * dev board must be held low during a reset or power up. * * Uses MultiTech mDot developer board http://www.multitech.com/models/94558010LF * Requires a MultiTech MultiConnect Conduit http://www.multitech.com/models/94557203LF @@ -24,23 +26,30 @@ // these options must match the settings on your Conduit in // /var/config/lora/lora-network-server.conf -static std::string config_network_name = "ThingInnovations"; -static std::string config_network_pass = "donkey123"; +static std::string config_network_name = "<network name>"; +static std::string config_network_pass = "<network password>"; +// Ignoring sub band for EU modules. //static uint8_t config_frequency_sub_band = 1; // mDot/dev board activity LED //#define ACTIVITY_LED PA_0 // DS18B20 OneWire pin -// D13 on Dev Board, pin x on mDot +// D13 on Dev Board, pin 18 on mDot #define DATA_PIN PA_5 -// A0 on Dev Board, pin x on mDot +// A0 on Dev Board, pin 20 on mDot //#define DATA_PIN PB_1 +// A2 - input to reset LoRaWAN config. Pin 15 om mDot. +#define CONFIG_RESET PC_1 + +// Config Reset intput +DigitalIn configReset(CONFIG_RESET); + +// Temperature sensor object DS1820 probe(DATA_PIN); -//void log_error(mDot* dot, const char* msg, int32_t retval); - +// Serial via USB for debugging only Serial pc(USBTX,USBRX); @@ -53,26 +62,25 @@ float temperature = 0.0; + // Enable internal pullup on input pin + configReset.mode(PullUp); + pc.baud(115200); pc.printf("mDot LoRa Temperature sensor\n\r"); // get a mDot handle dot = mDot::getInstance(); - dot->setLogLevel(MTSLog::TRACE_LEVEL); + dot->setLogLevel(MTSLog::WARNING_LEVEL); +// dot->setLogLevel(MTSLog::TRACE_LEVEL); logInfo("Checking Config"); // Test if we've already saved the config std::string configNetworkName = dot->getNetworkName(); - // Check pin, if low then reset config. -// if ((ret = dot->setJoinMode( mDot::AUTO_OTA )) != mDot::MDOT_OK) { -// logError("failed to set join mode %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); -// } - - - if( config_network_name.compare(configNetworkName) != 0 ) { + // Reset config if network name is different or pin is low then reset config. + if( config_network_name.compare(configNetworkName) != 0 || !configReset ) { // Not saved config, reset logInfo("Setting Config"); @@ -99,10 +107,10 @@ // Set Spreading Factor, higher is lower data rate, smaller packets but longer range // Lower is higher data rate, larger packets and shorter range. // dot->setTxDataRate( mDot::SF_9 ); - dot->setTxDataRate( mDot::SF_12 ); + dot->setTxDataRate( mDot::SF_12 ); dot->setTxPower( 14 ); dot->setAck( 0 ); // 1 retries on Ack, 0 to disable - + // Not applicable for 868MHz in EU // if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) { // initStatus = false; @@ -110,12 +118,10 @@ // } if ((ret = dot->setNetworkName(config_network_name)) != mDot::MDOT_OK) { -// initStatus = false; logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } if ((ret = dot->setNetworkPassphrase(config_network_pass)) != mDot::MDOT_OK) { -// initStatus = false; logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } @@ -135,20 +141,18 @@ while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) { logError("failed to join network [%d][%s]", ret, mDot::getReturnCodeString(ret).c_str()); - //wait(2); wait_ms(dot->getNextTxMs() + 1); } probe.setResolution(9); char dataBuf[50]; -// for (uint8_t i = 0; i < iterations; i++) { while( 1 ) { // This takes upto 750mS, way too long. Change to 9 bit resolution if not already used. probe.convertTemperature(true, DS1820::all_devices); //Start temperature conversion, wait until ready // printf("It is %3.1fC\r\n", probe.temperature()); - // Output data as JSON e.g. {"temperature":"21.3"} + // Output data as JSON e.g. {"tmp":21.3} temperature = probe.temperature(); sprintf(dataBuf, "{\"tmp\":%3.1f}", temperature ); send_data.clear(); @@ -169,13 +173,6 @@ // go to sleep and wake up automatically sleep_time seconds later dot->sleep(sleep_time, mDot::RTC_ALARM); - /* - next_tx = dot->getNextTxMs() + 1; - logInfo("waiting %ld ms to transmit again", next_tx); - wait_ms(next_tx); - logInfo("waiting another %d seconds", wait_time); - wait(wait_time); - */ } return 0;