![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
d
Dependencies: BME280 DOGS102 DS1820 MMA845x_timmeh MTS-Serial libmDot_Australia915Mhz mbed-rtos mbed
Fork of mDot_TTN_OTAA_Node by
main.cpp@7:2a704d1a30e1, 2015-10-28 (annotated)
- Committer:
- SomeRandomBloke
- Date:
- Wed Oct 28 11:06:03 2015 +0000
- Revision:
- 7:2a704d1a30e1
- Parent:
- 6:0a7760eeaba9
- Child:
- 8:8070e9d660e4
Removed ack
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
SomeRandomBloke | 5:48eb9245a914 | 1 | /** mDot_TTN_DS18B20 - Simple mDot temperature sensor using Dallas Semiconductors DS18B20 OneWire temperature sensor. |
SomeRandomBloke | 4:f649ab1b61d1 | 2 | * It used the OTA_AUTO join mode using saved parameters. If the config is to be reset then pin A2 on the |
SomeRandomBloke | 3:367aa95f9771 | 3 | * dev board must be held low during a reset or power up. |
SomeRandomBloke | 2:9db840d12557 | 4 | * |
SomeRandomBloke | 0:5a0b43f3b143 | 5 | * Uses MultiTech mDot developer board http://www.multitech.com/models/94558010LF |
SomeRandomBloke | 0:5a0b43f3b143 | 6 | * Requires a MultiTech MultiConnect Conduit http://www.multitech.com/models/94557203LF |
SomeRandomBloke | 5:48eb9245a914 | 7 | * http://www.multitech.net/developer/software/lora/conduit-mlinux-convert-to-basic-packet-forwarder/ |
SomeRandomBloke | 5:48eb9245a914 | 8 | * http://forum.thethingsnetwork.org/t/setting-up-multitech-conduit-gateway-for-ttn/216/35 |
SomeRandomBloke | 0:5a0b43f3b143 | 9 | * |
SomeRandomBloke | 0:5a0b43f3b143 | 10 | */ |
SomeRandomBloke | 0:5a0b43f3b143 | 11 | |
SomeRandomBloke | 0:5a0b43f3b143 | 12 | #include "mbed.h" |
SomeRandomBloke | 0:5a0b43f3b143 | 13 | #include "DS1820.h" |
SomeRandomBloke | 0:5a0b43f3b143 | 14 | #include "mDot.h" |
SomeRandomBloke | 0:5a0b43f3b143 | 15 | #include "MTSLog.h" |
SomeRandomBloke | 0:5a0b43f3b143 | 16 | #include "MTSText.h" |
SomeRandomBloke | 0:5a0b43f3b143 | 17 | #include <string> |
SomeRandomBloke | 0:5a0b43f3b143 | 18 | #include <vector> |
SomeRandomBloke | 0:5a0b43f3b143 | 19 | |
SomeRandomBloke | 0:5a0b43f3b143 | 20 | using namespace mts; |
SomeRandomBloke | 0:5a0b43f3b143 | 21 | |
SomeRandomBloke | 4:f649ab1b61d1 | 22 | #define MIN(a,b) (((a)<(b))?(a):(b)) |
SomeRandomBloke | 4:f649ab1b61d1 | 23 | #define MAX(a,b) (((a)>(b))?(a):(b)) |
SomeRandomBloke | 4:f649ab1b61d1 | 24 | |
SomeRandomBloke | 0:5a0b43f3b143 | 25 | // these options must match the settings on your Conduit in |
SomeRandomBloke | 0:5a0b43f3b143 | 26 | // /var/config/lora/lora-network-server.conf |
SomeRandomBloke | 5:48eb9245a914 | 27 | //static std::string config_network_name = "ThingInnovations"; |
SomeRandomBloke | 5:48eb9245a914 | 28 | //static std::string config_network_pass = "donkey123"; |
SomeRandomBloke | 5:48eb9245a914 | 29 | // |
SomeRandomBloke | 5:48eb9245a914 | 30 | //const uint8_t AppKey[16]={0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C}; |
SomeRandomBloke | 5:48eb9245a914 | 31 | // Application session key |
SomeRandomBloke | 5:48eb9245a914 | 32 | uint8_t AppSKey[16]= {0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C}; |
SomeRandomBloke | 5:48eb9245a914 | 33 | // Network session key |
SomeRandomBloke | 5:48eb9245a914 | 34 | uint8_t NwkSKey[16]= {0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C}; |
SomeRandomBloke | 5:48eb9245a914 | 35 | // Dev addr |
SomeRandomBloke | 6:0a7760eeaba9 | 36 | //uint8_t NodeAddr[4]= {0x23,0x05,0x19,0x67}; |
SomeRandomBloke | 6:0a7760eeaba9 | 37 | // Network Address |
SomeRandomBloke | 6:0a7760eeaba9 | 38 | uint8_t NetworkAddr[4]= {0x23,0x05,0x19,0x67}; |
SomeRandomBloke | 5:48eb9245a914 | 39 | |
SomeRandomBloke | 3:367aa95f9771 | 40 | // Ignoring sub band for EU modules. |
SomeRandomBloke | 1:45cec6aea002 | 41 | //static uint8_t config_frequency_sub_band = 1; |
SomeRandomBloke | 0:5a0b43f3b143 | 42 | |
SomeRandomBloke | 0:5a0b43f3b143 | 43 | // mDot/dev board activity LED |
SomeRandomBloke | 1:45cec6aea002 | 44 | //#define ACTIVITY_LED PA_0 |
SomeRandomBloke | 2:9db840d12557 | 45 | |
SomeRandomBloke | 2:9db840d12557 | 46 | // DS18B20 OneWire pin |
SomeRandomBloke | 3:367aa95f9771 | 47 | // D13 on Dev Board, pin 18 on mDot |
SomeRandomBloke | 1:45cec6aea002 | 48 | #define DATA_PIN PA_5 |
SomeRandomBloke | 3:367aa95f9771 | 49 | // A0 on Dev Board, pin 20 on mDot |
SomeRandomBloke | 1:45cec6aea002 | 50 | //#define DATA_PIN PB_1 |
SomeRandomBloke | 0:5a0b43f3b143 | 51 | |
SomeRandomBloke | 3:367aa95f9771 | 52 | // A2 - input to reset LoRaWAN config. Pin 15 om mDot. |
SomeRandomBloke | 3:367aa95f9771 | 53 | #define CONFIG_RESET PC_1 |
SomeRandomBloke | 3:367aa95f9771 | 54 | |
SomeRandomBloke | 3:367aa95f9771 | 55 | // Config Reset intput |
SomeRandomBloke | 3:367aa95f9771 | 56 | DigitalIn configReset(CONFIG_RESET); |
SomeRandomBloke | 3:367aa95f9771 | 57 | |
SomeRandomBloke | 3:367aa95f9771 | 58 | // Temperature sensor object |
SomeRandomBloke | 0:5a0b43f3b143 | 59 | DS1820 probe(DATA_PIN); |
SomeRandomBloke | 0:5a0b43f3b143 | 60 | |
SomeRandomBloke | 3:367aa95f9771 | 61 | // Serial via USB for debugging only |
SomeRandomBloke | 0:5a0b43f3b143 | 62 | Serial pc(USBTX,USBRX); |
SomeRandomBloke | 0:5a0b43f3b143 | 63 | |
SomeRandomBloke | 0:5a0b43f3b143 | 64 | |
SomeRandomBloke | 0:5a0b43f3b143 | 65 | int main() |
SomeRandomBloke | 0:5a0b43f3b143 | 66 | { |
SomeRandomBloke | 0:5a0b43f3b143 | 67 | int32_t ret; |
SomeRandomBloke | 0:5a0b43f3b143 | 68 | mDot* dot; |
SomeRandomBloke | 0:5a0b43f3b143 | 69 | std::vector<uint8_t> send_data; |
SomeRandomBloke | 0:5a0b43f3b143 | 70 | std::vector<uint8_t> recv_data; |
SomeRandomBloke | 5:48eb9245a914 | 71 | std::vector<uint8_t> nwkSKey; |
SomeRandomBloke | 5:48eb9245a914 | 72 | std::vector<uint8_t> nodeAddr; |
SomeRandomBloke | 6:0a7760eeaba9 | 73 | std::vector<uint8_t> networkAddr; |
SomeRandomBloke | 0:5a0b43f3b143 | 74 | |
SomeRandomBloke | 0:5a0b43f3b143 | 75 | float temperature = 0.0; |
SomeRandomBloke | 1:45cec6aea002 | 76 | |
SomeRandomBloke | 3:367aa95f9771 | 77 | // Enable internal pullup on input pin |
SomeRandomBloke | 3:367aa95f9771 | 78 | configReset.mode(PullUp); |
SomeRandomBloke | 3:367aa95f9771 | 79 | |
SomeRandomBloke | 0:5a0b43f3b143 | 80 | pc.baud(115200); |
SomeRandomBloke | 5:48eb9245a914 | 81 | pc.printf("TTN mDot LoRa Temperature sensor\n\r"); |
SomeRandomBloke | 1:45cec6aea002 | 82 | |
SomeRandomBloke | 0:5a0b43f3b143 | 83 | // get a mDot handle |
SomeRandomBloke | 0:5a0b43f3b143 | 84 | dot = mDot::getInstance(); |
SomeRandomBloke | 0:5a0b43f3b143 | 85 | |
SomeRandomBloke | 4:f649ab1b61d1 | 86 | // dot->setLogLevel(MTSLog::WARNING_LEVEL); |
SomeRandomBloke | 4:f649ab1b61d1 | 87 | dot->setLogLevel(MTSLog::TRACE_LEVEL); |
SomeRandomBloke | 0:5a0b43f3b143 | 88 | |
SomeRandomBloke | 1:45cec6aea002 | 89 | logInfo("Checking Config"); |
SomeRandomBloke | 1:45cec6aea002 | 90 | |
SomeRandomBloke | 1:45cec6aea002 | 91 | // Test if we've already saved the config |
SomeRandomBloke | 1:45cec6aea002 | 92 | std::string configNetworkName = dot->getNetworkName(); |
SomeRandomBloke | 5:48eb9245a914 | 93 | |
SomeRandomBloke | 5:48eb9245a914 | 94 | // pc.printf("Name: %s\r\n",config_network_name.c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 95 | uint8_t *it = NwkSKey; |
SomeRandomBloke | 5:48eb9245a914 | 96 | for (uint8_t i = 0; i<16; i++) |
SomeRandomBloke | 5:48eb9245a914 | 97 | nwkSKey.push_back((uint8_t) *it++); |
SomeRandomBloke | 5:48eb9245a914 | 98 | |
SomeRandomBloke | 6:0a7760eeaba9 | 99 | // it = NodeAddr; |
SomeRandomBloke | 6:0a7760eeaba9 | 100 | // for (uint8_t i = 0; i<4; i++) |
SomeRandomBloke | 6:0a7760eeaba9 | 101 | // nodeAddr.push_back((uint8_t) *it++); |
SomeRandomBloke | 6:0a7760eeaba9 | 102 | |
SomeRandomBloke | 6:0a7760eeaba9 | 103 | it = NetworkAddr; |
SomeRandomBloke | 5:48eb9245a914 | 104 | for (uint8_t i = 0; i<4; i++) |
SomeRandomBloke | 6:0a7760eeaba9 | 105 | networkAddr.push_back((uint8_t) *it++); |
SomeRandomBloke | 1:45cec6aea002 | 106 | |
SomeRandomBloke | 3:367aa95f9771 | 107 | // Reset config if network name is different or pin is low then reset config. |
SomeRandomBloke | 5:48eb9245a914 | 108 | // if( config_network_name.compare(configNetworkName) != 0 || !configReset ) { |
SomeRandomBloke | 6:0a7760eeaba9 | 109 | // if( !configReset ) { |
SomeRandomBloke | 5:48eb9245a914 | 110 | // Config Reset link present |
SomeRandomBloke | 5:48eb9245a914 | 111 | logInfo("Resetting Config"); |
SomeRandomBloke | 1:45cec6aea002 | 112 | // reset to default config so we know what state we're in |
SomeRandomBloke | 1:45cec6aea002 | 113 | dot->resetConfig(); |
SomeRandomBloke | 6:0a7760eeaba9 | 114 | // } |
SomeRandomBloke | 1:45cec6aea002 | 115 | |
SomeRandomBloke | 5:48eb9245a914 | 116 | // Set byte order - AEP less than 1.0.30 |
SomeRandomBloke | 1:45cec6aea002 | 117 | // dot->setJoinByteOrder(mDot::MSB); |
SomeRandomBloke | 7:2a704d1a30e1 | 118 | dot->setJoinByteOrder(mDot::LSB); |
SomeRandomBloke | 0:5a0b43f3b143 | 119 | |
SomeRandomBloke | 7:2a704d1a30e1 | 120 | // dot->setCrc(true); |
SomeRandomBloke | 5:48eb9245a914 | 121 | |
SomeRandomBloke | 5:48eb9245a914 | 122 | // If on developer board then you can enable activity LED |
SomeRandomBloke | 5:48eb9245a914 | 123 | // Currently no spare pins that LEDs are connected too. |
SomeRandomBloke | 0:5a0b43f3b143 | 124 | // dot->setActivityLedPin( ACTIVITY_LED ); |
SomeRandomBloke | 0:5a0b43f3b143 | 125 | // dot->setActivityLedEnable(false); |
SomeRandomBloke | 0:5a0b43f3b143 | 126 | |
SomeRandomBloke | 5:48eb9245a914 | 127 | // Have a decent nubmer of retries in connecting to LoRaWAN |
SomeRandomBloke | 7:2a704d1a30e1 | 128 | // logInfo("Set Join retries"); |
SomeRandomBloke | 7:2a704d1a30e1 | 129 | // if((ret = dot->setJoinRetries( 3 )) != mDot::MDOT_OK) { |
SomeRandomBloke | 7:2a704d1a30e1 | 130 | // logError("Failed to set Join retries %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 7:2a704d1a30e1 | 131 | // } |
SomeRandomBloke | 2:9db840d12557 | 132 | |
SomeRandomBloke | 5:48eb9245a914 | 133 | // Set Spreading Factor, higher is lower data rate, smaller packets but longer range |
SomeRandomBloke | 5:48eb9245a914 | 134 | // Lower is higher data rate, larger packets and shorter range. |
SomeRandomBloke | 5:48eb9245a914 | 135 | logInfo("Set SF"); |
SomeRandomBloke | 5:48eb9245a914 | 136 | // if((ret = dot->setTxDataRate( mDot::SF_9 )) != mDot::MDOT_OK) { |
SomeRandomBloke | 5:48eb9245a914 | 137 | if((ret = dot->setTxDataRate( mDot::SF_12 )) != mDot::MDOT_OK) { |
SomeRandomBloke | 5:48eb9245a914 | 138 | logError("Failed to set SF %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 139 | } |
SomeRandomBloke | 5:48eb9245a914 | 140 | |
SomeRandomBloke | 5:48eb9245a914 | 141 | logInfo("Set TxPower"); |
SomeRandomBloke | 5:48eb9245a914 | 142 | if((ret = dot->setTxPower( 14 )) != mDot::MDOT_OK) { |
SomeRandomBloke | 5:48eb9245a914 | 143 | logError("Failed to set Tx Power %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 144 | } |
SomeRandomBloke | 5:48eb9245a914 | 145 | |
SomeRandomBloke | 7:2a704d1a30e1 | 146 | logInfo("Set Public mode"); |
SomeRandomBloke | 7:2a704d1a30e1 | 147 | if((ret = dot->setPublicNetwork(true)) != mDot::MDOT_OK) { |
SomeRandomBloke | 7:2a704d1a30e1 | 148 | logError("failed to set Public Mode %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 7:2a704d1a30e1 | 149 | } |
SomeRandomBloke | 7:2a704d1a30e1 | 150 | |
SomeRandomBloke | 7:2a704d1a30e1 | 151 | logInfo("Set MANUAL Join mode"); |
SomeRandomBloke | 7:2a704d1a30e1 | 152 | if((ret = dot->setJoinMode(mDot::MANUAL)) != mDot::MDOT_OK) { |
SomeRandomBloke | 7:2a704d1a30e1 | 153 | logError("Failed to set MANUAL Join Mode %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 7:2a704d1a30e1 | 154 | } |
SomeRandomBloke | 7:2a704d1a30e1 | 155 | |
SomeRandomBloke | 5:48eb9245a914 | 156 | logInfo("Set Ack"); |
SomeRandomBloke | 5:48eb9245a914 | 157 | // 1 retries on Ack, 0 to disable |
SomeRandomBloke | 6:0a7760eeaba9 | 158 | if((ret = dot->setAck( 0 )) != mDot::MDOT_OK) { |
SomeRandomBloke | 5:48eb9245a914 | 159 | logError("Failed to set Ack %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 160 | } |
SomeRandomBloke | 3:367aa95f9771 | 161 | |
SomeRandomBloke | 1:45cec6aea002 | 162 | // Not applicable for 868MHz in EU |
SomeRandomBloke | 1:45cec6aea002 | 163 | // if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) { |
SomeRandomBloke | 1:45cec6aea002 | 164 | // initStatus = false; |
SomeRandomBloke | 0:5a0b43f3b143 | 165 | // logError(dot, "failed to set frequency sub band", ret); |
SomeRandomBloke | 1:45cec6aea002 | 166 | // } |
SomeRandomBloke | 1:45cec6aea002 | 167 | |
SomeRandomBloke | 6:0a7760eeaba9 | 168 | logInfo("Set Network Address"); |
SomeRandomBloke | 6:0a7760eeaba9 | 169 | if ((ret = dot->setNetworkAddress(networkAddr)) != mDot::MDOT_OK) { |
SomeRandomBloke | 7:2a704d1a30e1 | 170 | logError("Failed to set Network Address %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 7:2a704d1a30e1 | 171 | } |
SomeRandomBloke | 7:2a704d1a30e1 | 172 | |
SomeRandomBloke | 7:2a704d1a30e1 | 173 | logInfo("Set Data Session Key"); |
SomeRandomBloke | 7:2a704d1a30e1 | 174 | if ((ret = dot->setDataSessionKey(nwkSKey)) != mDot::MDOT_OK) { |
SomeRandomBloke | 7:2a704d1a30e1 | 175 | logError("Failed to set Data Session Key %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 176 | } |
SomeRandomBloke | 0:5a0b43f3b143 | 177 | |
SomeRandomBloke | 5:48eb9245a914 | 178 | logInfo("Set Network Session Key"); |
SomeRandomBloke | 5:48eb9245a914 | 179 | if ((ret = dot->setNetworkSessionKey(nwkSKey)) != mDot::MDOT_OK) { |
SomeRandomBloke | 5:48eb9245a914 | 180 | logError("Failed to set Network Session Key %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 181 | } |
SomeRandomBloke | 5:48eb9245a914 | 182 | |
SomeRandomBloke | 5:48eb9245a914 | 183 | // if ((ret = dot->setNetworkName(config_network_name)) != mDot::MDOT_OK) { |
SomeRandomBloke | 5:48eb9245a914 | 184 | // logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 185 | // } |
SomeRandomBloke | 1:45cec6aea002 | 186 | |
SomeRandomBloke | 5:48eb9245a914 | 187 | // if ((ret = dot->setNetworkPassphrase(config_network_pass)) != mDot::MDOT_OK) { |
SomeRandomBloke | 5:48eb9245a914 | 188 | // logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 189 | // } |
SomeRandomBloke | 1:45cec6aea002 | 190 | |
SomeRandomBloke | 5:48eb9245a914 | 191 | logInfo("Saving Config"); |
SomeRandomBloke | 5:48eb9245a914 | 192 | // Save config |
SomeRandomBloke | 5:48eb9245a914 | 193 | if (! dot->saveConfig()) { |
SomeRandomBloke | 5:48eb9245a914 | 194 | logError("failed to save configuration"); |
SomeRandomBloke | 0:5a0b43f3b143 | 195 | } |
SomeRandomBloke | 5:48eb9245a914 | 196 | // } else { |
SomeRandomBloke | 5:48eb9245a914 | 197 | // logInfo("Using existing Config"); |
SomeRandomBloke | 5:48eb9245a914 | 198 | // } |
SomeRandomBloke | 5:48eb9245a914 | 199 | |
SomeRandomBloke | 5:48eb9245a914 | 200 | // Display what is set |
SomeRandomBloke | 5:48eb9245a914 | 201 | std::vector<uint8_t> tmp = dot->getNetworkSessionKey(); |
SomeRandomBloke | 5:48eb9245a914 | 202 | pc.printf("Network Session Key: "); |
SomeRandomBloke | 5:48eb9245a914 | 203 | pc.printf("%s\r\n", mts::Text::bin2hexString(tmp, " ").c_str()); |
SomeRandomBloke | 5:48eb9245a914 | 204 | |
SomeRandomBloke | 5:48eb9245a914 | 205 | tmp = dot->getDataSessionKey(); |
SomeRandomBloke | 5:48eb9245a914 | 206 | pc.printf("Data Session Key: "); |
SomeRandomBloke | 5:48eb9245a914 | 207 | pc.printf("%s\r\n", mts::Text::bin2hexString(tmp, " ").c_str()); |
SomeRandomBloke | 0:5a0b43f3b143 | 208 | |
SomeRandomBloke | 5:48eb9245a914 | 209 | |
SomeRandomBloke | 6:0a7760eeaba9 | 210 | pc.printf("Device ID "); |
SomeRandomBloke | 6:0a7760eeaba9 | 211 | std::vector<uint8_t> deviceId; |
SomeRandomBloke | 6:0a7760eeaba9 | 212 | deviceId = dot->getDeviceId(); |
SomeRandomBloke | 6:0a7760eeaba9 | 213 | for (std::vector<uint8_t>::iterator it = deviceId.begin() ; it != deviceId.end(); ++it) |
SomeRandomBloke | 5:48eb9245a914 | 214 | pc.printf("%2.2x",*it ); |
SomeRandomBloke | 6:0a7760eeaba9 | 215 | pc.printf("\r\n"); |
SomeRandomBloke | 5:48eb9245a914 | 216 | |
SomeRandomBloke | 6:0a7760eeaba9 | 217 | std::vector<uint8_t> netAddress; |
SomeRandomBloke | 6:0a7760eeaba9 | 218 | |
SomeRandomBloke | 6:0a7760eeaba9 | 219 | pc.printf("Network Address "); |
SomeRandomBloke | 6:0a7760eeaba9 | 220 | netAddress = dot->getNetworkAddress(); |
SomeRandomBloke | 6:0a7760eeaba9 | 221 | for (std::vector<uint8_t>::iterator it = netAddress.begin() ; it != netAddress.end(); ++it) |
SomeRandomBloke | 5:48eb9245a914 | 222 | pc.printf("%2.2x",*it ); |
SomeRandomBloke | 5:48eb9245a914 | 223 | |
SomeRandomBloke | 5:48eb9245a914 | 224 | pc.printf("\r\n"); |
SomeRandomBloke | 5:48eb9245a914 | 225 | |
SomeRandomBloke | 5:48eb9245a914 | 226 | // Display LoRa parameters |
SomeRandomBloke | 5:48eb9245a914 | 227 | // Display label and values in different colours, show pretty values not numeric values where applicable |
SomeRandomBloke | 5:48eb9245a914 | 228 | pc.printf("Public Network: %s\r\n", (char*)(dot->getPublicNetwork() ? "Yes" : "No") ); |
SomeRandomBloke | 5:48eb9245a914 | 229 | pc.printf("Frequency: %s\r\n", (char*)mDot::FrequencyBandStr(dot->getFrequencyBand()).c_str() ); |
SomeRandomBloke | 5:48eb9245a914 | 230 | pc.printf("Sub Band: %s\r\n", (char*)mDot::FrequencySubBandStr(dot->getFrequencySubBand()).c_str() ); |
SomeRandomBloke | 5:48eb9245a914 | 231 | pc.printf("Join Mode: %s\r\n", (char*)mDot::JoinModeStr(dot->getJoinMode()).c_str() ); |
SomeRandomBloke | 6:0a7760eeaba9 | 232 | pc.printf("Join Retries: %d\r\n", dot->getJoinRetries() ); |
SomeRandomBloke | 6:0a7760eeaba9 | 233 | pc.printf("Join Byte Order: %s\r\n", (char*)(dot->getJoinByteOrder() == 0 ? "LSB" : "MSB") ); |
SomeRandomBloke | 5:48eb9245a914 | 234 | pc.printf("Link Check Count: %d\r\n", dot->getLinkCheckCount() ); |
SomeRandomBloke | 7:2a704d1a30e1 | 235 | pc.printf("Link Check Thold: %d\r\n", dot->getLinkCheckThreshold() ); |
SomeRandomBloke | 5:48eb9245a914 | 236 | pc.printf("Tx Data Rate: %s\r\n", (char*)mDot::DataRateStr(dot->getTxDataRate()).c_str() ); |
SomeRandomBloke | 5:48eb9245a914 | 237 | pc.printf("Tx Power: %d\r\n", dot->getTxPower() ); |
SomeRandomBloke | 6:0a7760eeaba9 | 238 | pc.printf("TxWait: %s, ", (dot->getTxWait() ? "Y" : "N" )); |
SomeRandomBloke | 5:48eb9245a914 | 239 | pc.printf("CRC: %s, ", (dot->getCrc() ? "Y" : "N") ); |
SomeRandomBloke | 5:48eb9245a914 | 240 | pc.printf("Ack: %s\r\n", (dot->getAck() ? "Y" : "N") ); |
SomeRandomBloke | 5:48eb9245a914 | 241 | |
SomeRandomBloke | 7:2a704d1a30e1 | 242 | // logInfo("Joining Network"); |
SomeRandomBloke | 6:0a7760eeaba9 | 243 | |
SomeRandomBloke | 7:2a704d1a30e1 | 244 | // while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) { |
SomeRandomBloke | 7:2a704d1a30e1 | 245 | // logError("failed to join network [%d][%s]", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 7:2a704d1a30e1 | 246 | // wait_ms(dot->getNextTxMs() + 1); |
SomeRandomBloke | 7:2a704d1a30e1 | 247 | // } |
SomeRandomBloke | 6:0a7760eeaba9 | 248 | |
SomeRandomBloke | 7:2a704d1a30e1 | 249 | // logInfo("Joined Network"); |
SomeRandomBloke | 6:0a7760eeaba9 | 250 | |
SomeRandomBloke | 0:5a0b43f3b143 | 251 | probe.setResolution(9); |
SomeRandomBloke | 0:5a0b43f3b143 | 252 | |
SomeRandomBloke | 0:5a0b43f3b143 | 253 | char dataBuf[50]; |
SomeRandomBloke | 0:5a0b43f3b143 | 254 | while( 1 ) { |
SomeRandomBloke | 0:5a0b43f3b143 | 255 | // This takes upto 750mS, way too long. Change to 9 bit resolution if not already used. |
SomeRandomBloke | 1:45cec6aea002 | 256 | |
SomeRandomBloke | 0:5a0b43f3b143 | 257 | probe.convertTemperature(true, DS1820::all_devices); //Start temperature conversion, wait until ready |
SomeRandomBloke | 0:5a0b43f3b143 | 258 | // printf("It is %3.1fC\r\n", probe.temperature()); |
SomeRandomBloke | 7:2a704d1a30e1 | 259 | // Output data as JSON e.g. {"t":21.3} |
SomeRandomBloke | 0:5a0b43f3b143 | 260 | temperature = probe.temperature(); |
SomeRandomBloke | 7:2a704d1a30e1 | 261 | sprintf(dataBuf, "{\"t\":%3.1f}", temperature ); |
SomeRandomBloke | 0:5a0b43f3b143 | 262 | send_data.clear(); |
SomeRandomBloke | 0:5a0b43f3b143 | 263 | // probably not the most efficent way to do this |
SomeRandomBloke | 0:5a0b43f3b143 | 264 | for( int i=0; i< strlen(dataBuf); i++ ) |
SomeRandomBloke | 0:5a0b43f3b143 | 265 | send_data.push_back( dataBuf[i] ); |
SomeRandomBloke | 0:5a0b43f3b143 | 266 | |
SomeRandomBloke | 0:5a0b43f3b143 | 267 | if ((ret = dot->send(send_data)) != mDot::MDOT_OK) { |
SomeRandomBloke | 0:5a0b43f3b143 | 268 | logError("failed to send: [%d][%s]", ret, mDot::getReturnCodeString(ret).c_str()); |
SomeRandomBloke | 0:5a0b43f3b143 | 269 | } else { |
SomeRandomBloke | 0:5a0b43f3b143 | 270 | logInfo("send data: %s", Text::bin2hexString(send_data).c_str()); |
SomeRandomBloke | 0:5a0b43f3b143 | 271 | } |
SomeRandomBloke | 0:5a0b43f3b143 | 272 | |
SomeRandomBloke | 1:45cec6aea002 | 273 | // Should sleep here and wakeup after a set interval. |
SomeRandomBloke | 4:f649ab1b61d1 | 274 | uint32_t sleep_time = MAX((dot->getNextTxMs() / 1000), 60); |
SomeRandomBloke | 2:9db840d12557 | 275 | logInfo("going to sleep for %d seconds", sleep_time); |
SomeRandomBloke | 0:5a0b43f3b143 | 276 | |
SomeRandomBloke | 1:45cec6aea002 | 277 | // go to sleep and wake up automatically sleep_time seconds later |
SomeRandomBloke | 5:48eb9245a914 | 278 | // dot->sleep(sleep_time, mDot::RTC_ALARM); |
SomeRandomBloke | 2:9db840d12557 | 279 | |
SomeRandomBloke | 5:48eb9245a914 | 280 | wait_ms(sleep_time * 1000); |
SomeRandomBloke | 0:5a0b43f3b143 | 281 | } |
SomeRandomBloke | 2:9db840d12557 | 282 | |
SomeRandomBloke | 0:5a0b43f3b143 | 283 | return 0; |
SomeRandomBloke | 0:5a0b43f3b143 | 284 | } |