![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
d
Dependencies: BME280 DOGS102 DS1820 MMA845x_timmeh MTS-Serial libmDot_Australia915Mhz mbed-rtos mbed
Fork of mDot_TTN_OTAA_Node by
main.cpp
- Committer:
- SomeRandomBloke
- Date:
- 2016-05-11
- Revision:
- 15:8a0ebf59b8bb
- Parent:
- 13:5369ba22389a
- Child:
- 16:290c505e3851
File content as of revision 15:8a0ebf59b8bb:
/** mDot_TTN_Node - Simple mDot temperature sensor using Dallas Semiconductors DS18B20 OneWire temperature sensor. * It used the AUTO_OTA join mode with parameters for The Things Network. * * * Uses MultiTech mDot developer board http://www.multitech.com/models/94558010LF * Requires a MultiTech MultiConnect Conduit http://www.multitech.com/models/94557203LF * http://www.multitech.net/developer/software/lora/conduit-mlinux-convert-to-basic-packet-forwarder/ * http://forum.thethingsnetwork.org/t/setting-up-multitech-conduit-gateway-for-ttn/216/35 * * Register a device and generate a random AppKey for the currently used application Id: * (You need to use your own device IDs, the ones shown here are examples only) * *./ttnctl devices register 0080000000000000 * INFO Generating random AppKey... * INFO Registered device AppKey=000102030405060708090A0B0C0D0E0F DevEUI=0080000000000000 * * or to specify the same AppKey for a new device or to reregister the same device again: * * ./ttnctl devices register 0080000000000000 000102030405060708090A0B0C0D0E0F * * ./ttnctl devices info 0080000000000000 * Dynamic device: * * AppEUI: 70B3D50000000000 * {0x70, 0xB3, 0xD5, 0x00, 0x00, 0x00, 0x00, 0x00} * * DevEUI: 0080000000000000 * {0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} * * AppKey: 000102030405060708090A0B0C0D0E0F * {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F} * * * Copy the AppEUI and AppKey values provided in hex array notation above to the AppEUI and AppKey parameters below. * */ #include "mbed.h" #include "DS1820.h" //#include "BME280.h" #include "mDot.h" #include "MTSLog.h" #include "MTSText.h" #include <string> #include <vector> using namespace mts; #define MIN(a,b) (((a)<(b))?(a):(b)) #define MAX(a,b) (((a)>(b))?(a):(b)) // AppEUI uint8_t AppEUI[8]={0x70, 0xB3, 0xD5, 0x00, 0x00, 0x00, 0x00, 0x00}; // AppKey uint8_t AppKey[16]={0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F}; // Some defines for the LoRa configuration /* * EU868 Datarates * --------------- * DR0 - SF12BW125 * DR1 - SF11BW125 * DR2 - SF10BW125 * DR3 - SF9BW125 * DR4 - SF8BW125 * DR5 - SF7BW125 * DR6 - SF7BW250 * * US915 Datarates * --------------- * DR0 - SF10BW125 * DR1 - SF9BW125 * DR2 - SF8BW125 * DR3 - SF7BW125 * DR4 - SF8BW500 */ #define LORA_SF mDot::DR5 #define LORA_ACK 0 #define LORA_TXPOWER 14 // Ignoring sub band for EU modules. static uint8_t config_frequency_sub_band = 1; // DS18B20 OneWire pin // D13 on Dev Board, pin 18 on mDot, Compatible with Oxford Flood Network PCB temperature sensor. //#define DATA_PIN PA_5 // A1 on Dev Board, pin 19 on mDot #define DATA_PIN PC_13 // Temperature sensor object DS1820 probe(DATA_PIN); // BME280 Temperature/Humidity/Pressure sensor //BME280 sensor(I2C_SDA, I2C_SCL); // Serial via USB for debugging only Serial pc(USBTX,USBRX); int main() { int32_t ret; mDot* dot; std::vector<uint8_t> send_data; std::vector<uint8_t> recv_data; std::vector<uint8_t> nwkId; std::vector<uint8_t> nwkKey; float temperature = 0.0; float humidity = 0.0; float pressure = 0.0; pc.baud(115200); pc.printf("TTN OTAA mDot LoRa Temperature sensor\n\r"); // get a mDot handle dot = mDot::getInstance(); // dot->setLogLevel(MTSLog::WARNING_LEVEL); dot->setLogLevel(MTSLog::TRACE_LEVEL); logInfo("Checking Config"); uint8_t *it = AppEUI; for (uint8_t i = 0; i<8; i++) nwkId.push_back((uint8_t) *it++); it = AppKey; for (uint8_t i = 0; i<16; i++) nwkKey.push_back((uint8_t) *it++); logInfo("Resetting Config"); // reset to default config so we know what state we're in dot->resetConfig(); // Set Spreading Factor, higher is lower data rate, smaller packets but longer range // Lower is higher data rate, larger packets and shorter range. logInfo("Set SF"); if((ret = dot->setTxDataRate( LORA_SF )) != mDot::MDOT_OK) { logError("Failed to set SF %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } logInfo("Set TxPower"); if((ret = dot->setTxPower( LORA_TXPOWER )) != mDot::MDOT_OK) { logError("Failed to set Tx Power %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } logInfo("Set Public mode"); if((ret = dot->setPublicNetwork(true)) != mDot::MDOT_OK) { logError("failed to set Public Mode %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } logInfo("Set AUTO_OTA Join mode"); if((ret = dot->setJoinMode(mDot::AUTO_OTA)) != mDot::MDOT_OK) { logError("Failed to set AUTO_OTA Join Mode %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } logInfo("Set Ack"); // 1 retries on Ack, 0 to disable if((ret = dot->setAck( LORA_ACK)) != mDot::MDOT_OK) { logError("Failed to set Ack %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } // Library ignores the frequency sub band for 868MHz in EU if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) { logError("Failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } logInfo("Set Network Id"); if ((ret = dot->setNetworkId(nwkId)) != mDot::MDOT_OK) { logError("Failed to set Network Id %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } logInfo("Set Network Key"); if ((ret = dot->setNetworkKey(nwkKey)) != mDot::MDOT_OK) { logError("Failed to set Network Id %d:%s", ret, mDot::getReturnCodeString(ret).c_str()); } logInfo("Saving Config"); // Save config if (! dot->saveConfig()) { logError("failed to save configuration"); } pc.printf("Device ID {"); std::vector<uint8_t> deviceId; deviceId = dot->getDeviceId(); for (std::vector<uint8_t>::iterator it = deviceId.begin() ; it != deviceId.end(); ++it) { pc.printf("0x%2.2X",*it ); pc.printf("%s", it != (deviceId.end() -1 ) ? ", " : " " ); } pc.printf("}\r\n"); std::vector<uint8_t> netId; pc.printf("Network Id/App EUI {"); netId = dot->getNetworkId(); for (std::vector<uint8_t>::iterator it = netId.begin() ; it != netId.end(); ++it) { pc.printf("0x%2.2X", *it ); pc.printf("%s", it != (netId.end() -1 ) ? ", " : " " ); } pc.printf("}\r\n"); std::vector<uint8_t> netKey; pc.printf("Network Key/App Key {"); netKey = dot->getNetworkKey(); for (std::vector<uint8_t>::iterator it = netKey.begin() ; it != netKey.end(); ++it) { pc.printf("0x%2.2X", *it ); pc.printf("%s", it != (netKey.end() -1 ) ? ", " : " " ); } pc.printf("}\r\n"); // Display LoRa parameters // Display label and values in different colours, show pretty values not numeric values where applicable /* pc.printf("Public Network: %s\r\n", (char*)(dot->getPublicNetwork() ? "Yes" : "No") ); pc.printf("Frequency: %s\r\n", (char*)mDot::FrequencyBandStr(dot->getFrequencyBand()).c_str() ); pc.printf("Sub Band: %s\r\n", (char*)mDot::FrequencySubBandStr(dot->getFrequencySubBand()).c_str() ); pc.printf("Join Mode: %s\r\n", (char*)mDot::JoinModeStr(dot->getJoinMode()).c_str() ); pc.printf("Join Retries: %d\r\n", dot->getJoinRetries() ); pc.printf("Join Byte Order: %s\r\n", (char*)(dot->getJoinByteOrder() == 0 ? "LSB" : "MSB") ); pc.printf("Link Check Count: %d\r\n", dot->getLinkCheckCount() ); pc.printf("Link Check Thold: %d\r\n", dot->getLinkCheckThreshold() ); pc.printf("Tx Data Rate: %s\r\n", (char*)mDot::DataRateStr(dot->getTxDataRate()).c_str() ); pc.printf("Tx Power: %d\r\n", dot->getTxPower() ); pc.printf("TxWait: %s, ", (dot->getTxWait() ? "Y" : "N" )); pc.printf("CRC: %s, ", (dot->getCrc() ? "Y" : "N") ); pc.printf("Ack: %s\r\n", (dot->getAck() ? "Y" : "N") ); */ logInfo("Joining Network"); while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) { logError("failed to join network [%d][%s]", ret, mDot::getReturnCodeString(ret).c_str()); wait_ms(dot->getNextTxMs() + 1); } logInfo("Joined Network"); // Display Network session key and data session key from Join command /* std::vector<uint8_t> tmp = dot->getNetworkSessionKey(); pc.printf("Network Session Key: "); pc.printf("%s\r\n", mts::Text::bin2hexString(tmp, " ").c_str()); tmp = dot->getDataSessionKey(); pc.printf("Data Session Key: "); pc.printf("%s\r\n", mts::Text::bin2hexString(tmp, " ").c_str()); */ // Set the Temperature sesnor resolution, 9 bits is enough and makes it faster to provide a reading. probe.setResolution(9); char dataBuf[50]; while( 1 ) { // Output data as JSON e.g. {"t":21.3} // temperature = sensor.getTemperature(); // humidity = sensor.getHumidity(); // pressure = sensor.getPressure(); //Start temperature conversion, wait until ready probe.convertTemperature(true, DS1820::all_devices); // Output data as JSON e.g. {"t":21.3} temperature = probe.temperature(); sprintf(dataBuf, "{\"t\":%3.1f}", temperature ); // sprintf(dataBuf, "%3.1f,%3.1f,%04.2f", temperature,humidity,pressure ); pc.printf("%s\n",dataBuf); send_data.clear(); // probably not the most efficent way to do this for( int i=0; i< strlen(dataBuf); i++ ) send_data.push_back( dataBuf[i] ); if ((ret = dot->send(send_data)) != mDot::MDOT_OK) { logError("failed to send: [%d][%s]", ret, mDot::getReturnCodeString(ret).c_str()); } else { logInfo("send data: %s", Text::bin2hexString(send_data).c_str()); } // Should sleep here and wakeup after a set 5 minute interval. // in the 868 (EU) frequency band, we need to wait until another channel is available before transmitting again uint32_t sleep_time = std::max((uint32_t)300000, (uint32_t)dot->getNextTxMs()) / 1000; //wait_ms(2000); // go to sleep and wake up automatically sleep_time seconds later dot->sleep(sleep_time, mDot::RTC_ALARM); } }