znrobotics 智能工场 / Mbed 2 deprecated Seeed_Arch_link_TempAndHumidity

Read the temperature and humidity from the sensor and print them.

Dependencies:   DHT22 mbed

Fork of Program2_TempAndHumidity by Robotics Kit Workshop

Seeed_Arch_link_TempAndHumidity

Setup

  1. Connect the Temperature sensor as well as the Servo to the Seeeduino-Arch-Link board, and then connect the board to you PC using the micro-USB cable.
  2. The board mounts as a mass-storage device (like a USB drive). Verify that you can see it (drive name will be MBED).
  3. Go to http://developer.mbed.org
  4. Create an ARM mbed account if you do not have one.
  5. On the top right corner, click the Compiler button.

An IDE should open. Congratulations!

On Windows: To see debug messages, install the serial driver.

Debug messages: We can talk to the board via a serial port, but you might need some software. Read this doc and install required software (like PuTTY or CoolTermon Windows).

Locally: If you like things locally, you can do so by exporting to a supported toolchain.

I very much recommend to just use the online IDE, as it makes it easier for us, but if you want to continue hacking in the future, this is a nice way.

Seeed_Arch_link_TempAndHumidity

  1. Go back to the compiler browser window and click F5 to refresh the page.
  2. Click the Import button, then click "Click Here to import from URL"
  3. Paste the URL https://developer.mbed.org/teams/znrobotics/code/Seeed_Arch_link_TempAndHumidity/
  4. Double click to open main.cpp
  5. We are trying to get the temperature and humidity from the sensor
  6. Try to finish the code under ' YOUR CODE HERE: read the temperature and humidity
  1. Now press Compile
  2. A file downloads ( Seeed_Arch_link_TempAndHumidity.hex)
  3. Drag the file to the 'MBED' disk
  4. After flashing, hit the 'Reset' button to start the program.
  5. With the program running successfully, we can see the temperature and humidity information printed on the terminal (CoolTerm / TeraTerm/ Putty)

main.cpp@0:c12c28a0f9e7, 2014-08-15 (annotated)

Committer:
sam_grove
Date:
Fri Aug 15 20:59:57 2014 +0000
Revision:
0:c12c28a0f9e7
Child:
2:90b2eb3d14e6
Initial commit

Who changed what in which revision?

UserRevisionLine numberNew contents of line
sam_grove 0:c12c28a0f9e7 1
sam_grove 0:c12c28a0f9e7 2 #include "mbed.h"
sam_grove 0:c12c28a0f9e7 3 #include "DHT.h"
sam_grove 0:c12c28a0f9e7 4
sam_grove 0:c12c28a0f9e7 5 DHT sensor(D4, DHT11);
sam_grove 0:c12c28a0f9e7 6
sam_grove 0:c12c28a0f9e7 7 int main()
sam_grove 0:c12c28a0f9e7 8 {
sam_grove 0:c12c28a0f9e7 9 int error = 0;
sam_grove 0:c12c28a0f9e7 10 float h = 0.0f, c = 0.0f, f = 0.0f, k = 0.0f, dp = 0.0f, dpf = 0.0f;
sam_grove 0:c12c28a0f9e7 11
sam_grove 0:c12c28a0f9e7 12 while(1) {
sam_grove 0:c12c28a0f9e7 13 wait(2.0f);
sam_grove 0:c12c28a0f9e7 14 error = sensor.readData();
sam_grove 0:c12c28a0f9e7 15 if (0 == error) {
sam_grove 0:c12c28a0f9e7 16 c = sensor.ReadTemperature(CELCIUS);
sam_grove 0:c12c28a0f9e7 17 f = sensor.ReadTemperature(FARENHEIT);
sam_grove 0:c12c28a0f9e7 18 k = sensor.ReadTemperature(KELVIN);
sam_grove 0:c12c28a0f9e7 19 h = sensor.ReadHumidity();
sam_grove 0:c12c28a0f9e7 20 dp = sensor.CalcdewPoint(c, h);
sam_grove 0:c12c28a0f9e7 21 dpf = sensor.CalcdewPointFast(c, h);
sam_grove 0:c12c28a0f9e7 22 printf("Temperature in Kelvin: %4.2f, Celcius: %4.2f, Farenheit %4.2f\n", k, c, f);
sam_grove 0:c12c28a0f9e7 23 printf("Humidity is %4.2f, Dewpoint: %4.2f, Dewpoint fast: %4.2f\n", h, dp, dpf);
sam_grove 0:c12c28a0f9e7 24 } else {
sam_grove 0:c12c28a0f9e7 25 printf("Error: %d\n", error);
sam_grove 0:c12c28a0f9e7 26 }
sam_grove 0:c12c28a0f9e7 27 }
sam_grove 0:c12c28a0f9e7 28 }