File content as of revision 0:921ceae3cd78:

/* mbed Microcontroller Library
 * Copyright (c) 2017 u-blox
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
#include "battery_gauge_bq35100.h"

// LEDs
DigitalOut ledRed(LED1, 1);
DigitalOut ledGreen(LED2, 1);

/* This example program for the u-blox C030 primary battery
 * shield instantiates the BQ35100 battery gauge and performs
 * a few example calls to the battery gauge API.  Progress may
 * be monitored with a serial terminal running at 9600 baud.
 * The LED on the C030 board will turn green when this program
 * is operating correctly and will turn red if there is a failure.
 */

int main()
{
    I2C i2C(I2C_SDA, I2C_SCL);
    BatteryGaugeBq35100 gauge;
    int32_t reading;
    bool stop = false;

    printf ("Starting up...\n");
    if (gauge.init(&i2C)) {        
        printf ("BQ35100 battery gauge chip is initialised.\n");
    }
    
    ledGreen = 1;
    ledRed = 0;
    printf("Should never get here.\n");
    MBED_ASSERT(false);
}

// End Of File