Revision 0:951893313850, committed 2016-01-22

Comitter:

msinig

Date:

Fri Jan 22 15:29:51 2016 +0000

Commit message:

Initial drop

Changed in this revision

diff -r 000000000000 -r 951893313850 C027_Support.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/C027_Support.lib	Fri Jan 22 15:29:51 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/teams/ublox/code/C027_Support/#8dc8f48275fc

diff -r 000000000000 -r 951893313850 CNManager.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/CNManager.lib	Fri Jan 22 15:29:51 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/teams/ublox/code/CNManager/#29ad1d1ac1f9

diff -r 000000000000 -r 951893313850 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Jan 22 15:29:51 2016 +0000
@@ -0,0 +1,114 @@
+//------------------------------------------------------------------------------------
+/* This example was tested on C027-U20 and C027-G35 with the on board modem. 
+   
+   Additionally it was tested with a shield where the SARA-G350/U260/U270 RX/TX/PWRON 
+   is connected to D0/D1/D4 and the GPS SCL/SDA is connected D15/D15. In this 
+   configuration the following platforms were tested (it is likely that others 
+   will work as well)
+   - U-BLOX:    C027-G35, C027-U20, C027-C20 (for shield set define C027_FORCE_SHIELD)
+   - NXP:       LPC1549v2, LPC4088qsb
+   - Freescale: FRDM-KL05Z, FRDM-KL25Z, FRDM-KL46Z, FRDM-K64F
+   - STM:       NUCLEO-F401RE, NUCLEO-F030R8
+                mount resistors SB13/14 1k, SB62/63 0R
+*/
+#include "GPS.h"
+#include "MDM.h"
+#include "CNManager/CNManager.h"
+//------------------------------------------------------------------------------------
+// You need to configure these cellular modem / SIM parameters.
+// These parameters are ignored for LISA-C200 variants and can be left NULL.
+//------------------------------------------------------------------------------------
+//! Set your secret SIM pin here (e.g. "1234"). Check your SIM manual.
+#define SIMPIN      NULL
+/*! The APN of your network operator SIM, sometimes it is "internet" check your 
+    contract with the network operator. You can also try to look-up your settings in 
+    google: https://www.google.de/search?q=APN+list */
+#define APN         NULL
+//! Set the user name for your APN, or NULL if not needed
+#define USERNAME    NULL
+//! Set the password for your APN, or NULL if not needed
+#define PASSWORD    NULL 
+//------------------------------------------------------------------------------------
+
+
+//handler function
+void mngHandler(MngEvents ev, void* p){
+    if (ev == MNG_EV_IDLE){
+        MDMSerial* mdm = cnGetMDM();
+        MDMParser::DevStatus devStatus = {};
+        
+        printf("Handler:: Device has been inited correctly\r\n");
+        getDevStatus(&devStatus);
+        mdm->dumpDevStatus(&devStatus);        
+    }else if (ev == MNG_EV_DATA_UP){
+        MDMParser::NetStatus netStatus = {};
+        MDMSerial* mdm = cnGetMDM();
+        
+        printf("Handler:: DATA is now UP\r\n");
+        getNetStatus(&netStatus);
+        mdm->dumpNetStatus(&netStatus);                   
+        //Token can be released from u-blox site, when you got one replace "TOKEN" below 
+        //if (!mdm.cellLocSrvTcp("TOKEN"))
+        if (!mdm->cellLocSrvTcp("c_vCHm7ifUWKlj3M2t0Bhw"))
+            mdm->cellLocSrvUdp();        
+        mdm->cellLocConfig(1);   // Deep scan mode
+        mdm->cellLocUnsol(1);
+    }
+    else if (ev == MNG_EV_DATA_DOWN){
+        MDMParser::NetStatus netStatus = {};
+        MDMSerial* mdm = cnGetMDM();
+        
+        printf("Handler:: DATA is now DOWN\r\n");
+        getNetStatus(&netStatus);
+        mdm->dumpNetStatus(&netStatus);                 
+    }
+}
+
+int main(void)
+{    
+    const int wait = 100;
+    const int timeoutMargin = 5; // seconds
+    const int submitPeriod = 40; // 1 minutes in seconds
+    unsigned int j = submitPeriod * 1000/wait;
+    bool cellLocWait = false;     
+    GPSI2C gps; 
+    
+    printf("Main::CM\r\n");
+    cnInit();
+    cnSetApn(APN, USERNAME, PASSWORD);
+    cnSetSimPin(SIMPIN);
+    cnSetDebug(3);    
+    cnRegHandler(mngHandler);
+     
+     while (true){
+       if (cnIsDataUp()){
+           printf("Main:: DATA is UP\r\n");
+           MDMSerial* mdm = cnGetMDM();
+           if (j++ == submitPeriod * 1000/wait) {   
+                j=0;
+                printf("CellLocate Request\r\n");
+                if (mdm->cellLocRequest(MDMParser::CELL_HYBRID, submitPeriod-timeoutMargin, 1,MDMParser::CELL_MULTIHYP, 2))
+                    cellLocWait = true;
+            }                  
+            if (cellLocWait && mdm->cellLocGetExpRes()>0 && mdm->cellLocGetRes() == mdm->cellLocGetExpRes()){   
+                MDMParser::CellLocData loc;  
+                cellLocWait = false;     
+                for(int i=0; i < mdm->cellLocGetRes(); i++){
+                    mdm->cellLocGetData(&loc, i);                        
+                    printf("CellLocate position received number %d, sensor_used: %d\r\n", i, loc.sensor );           
+                    printf("  latitude: %0.5f, longitude: %0.5f, altitute: %d\r\n", loc.latitude, loc.longitude, loc.altitutude);
+                    if (loc.sensor == 1)
+                        printf("  uncertainty: %d, speed: %d, direction: %d, vertical_acc: %d, satellite used: %d \r\n", loc.uncertainty,loc.speed,loc.direction,loc.verticalAcc,loc.svUsed);                                      
+                }
+            }
+            else if (cellLocWait && (j%10 == 0 ))
+                printf("Waiting for CellLocate...\r\n");        
+         }
+         cnLoop();
+         wait_ms(30);
+     }
+     
+    gps.powerOff();
+    cnSetPower(false);
+    return 0;
+}
\ No newline at end of file

diff -r 000000000000 -r 951893313850 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Jan 22 15:29:51 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/6f327212ef96
\ No newline at end of file