u-blox
This example establishes a transparent link between the mbed seial port and the gps on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. u-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html
Dependencies: mbed
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration
Changes
| Revision | Date | Who | Commit message |
|---|---|---|---|
| 3:e8792e374579 | 2014-06-12 | mazgch | update libraries (use api provided by the platform) |
| 2:490b4b087576 | 2013-11-06 | mazgch | use latest C027 library |
| 1:0d32baf4a645 | 2013-10-25 | mazgch | use power config |
| 0:7f124c0a351a | 2013-10-22 | mazgch | Simple transparent serial port to the gps receiver, |