u-blox
This example establishes a transparent link between the mbed serial port and the gps I2C on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html
Dependencies: mbed
Fork of
C027_GPSTransparentSerial
by 
u-blox
You are viewing an older revision! See the latest version
Homepage
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. Windows-serial-configuration