This example establishes a transparent link between the mbed serial port and the gps I2C on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html
Dependencies: mbed
Fork of C027_GPSTransparentSerial by
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration
mbed.bld
- Committer:
- mazgch
- Date:
- 2014-06-12
- Revision:
- 6:5a8fd99e6a09
- Parent:
- 0:7f124c0a351a
File content as of revision 6:5a8fd99e6a09:
http://mbed.org/users/mbed_official/code/mbed/builds/024bf7f99721