stm32_esimez / Mbed 2 deprecated STM32F103C8_Plantilla

Dependencies:   mbed

Revision:
4:e1e547c34929
Parent:
3:1ccbb37e3828
Child:
5:e2fe0990d8ad
--- a/PinNames.h	Sat Sep 14 04:32:30 2019 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,201 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- 
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-#include "PinNamesTypes.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-//UART to AMB8826
-#define TXD1      PA_9
-#define RXD1      PA_10
-#define CTS1      PA_11
-int baudRate = 115200;
-
-//UART to Silicon Labs CP210x
-#define TXD2      PA_2
-#define RXD2      PA_3
-
-//UART to FTDI
-#define TXD3      PB_10
-#define RXD3      PB_11
-
-//I2C
-#define I2C1_SCL  PB_6
-#define I2C1_SDA  PB_7
-
-#define I2C2_SCL  PB_10
-#define I2C2_SDA  PB_11
-
-//SPI
-#define SPI1_MOSI PA_7
-#define SPI1_MISO PA_6
-#define SPI1_SCLK PA_5
-#define SPI1_NSS1 PA_4
-#define SDsel     PA_4
-
-#define SPI2_MOSI PB_15
-#define SPI2_MISO PB_14
-#define SPI2_SCLK PB_13
-#define SPI2_NSS2 PB_12
-
-//CAN
-#define CAN1_RX   PA_11
-#define CAN1_TX   PA_12
-
-//USB   CDC
-#define USB_POS   PA_12
-#define USB_NEG   PA_11
-
-//ADC
-#define Uin       PA_1
-#define Ubatt     PA_0
-
-typedef enum {
-    // Not connected
-    NC = (int)0xFFFFFFFF,
-
-    // Ports
-    PA_0  = 0x00,
-    PA_1  = 0x01,
-    PA_2  = 0x02,
-    PA_3  = 0x03,
-    PA_4  = 0x04,
-    PA_5  = 0x05,
-    PA_6  = 0x06,
-    PA_7  = 0x07,
-    PA_8  = 0x08,
-    PA_9  = 0x09,
-    PA_10 = 0x0A,
-    PA_11 = 0x0B,
-    PA_12 = 0x0C,
-    PA_13 = NC,
-    PA_14 = NC,
-    PA_15 = 0x0F,
-
-    PB_0  = 0x10,
-    PB_1  = 0x11,
-    PB_2  = NC,
-    PB_3  = 0x13,
-    PB_4  = 0x14,
-    PB_5  = 0x15,
-    PB_6  = 0x16,
-    PB_7  = 0x17,
-    PB_8  = 0x18,
-    PB_9  = 0x19,
-    PB_10 = 0x1A,
-    PB_11 = 0x1B,
-    PB_12 = 0x1C,
-    PB_13 = 0x1D,
-    PB_14 = 0x1E,
-    PB_15 = 0x1F,
-
-    PC_0  = NC,
-    PC_1  = NC,
-    PC_2  = NC,
-    PC_3  = NC,
-    PC_4  = NC,
-    PC_5  = NC,
-    PC_6  = NC,
-    PC_7  = NC,
-    PC_8  = NC,
-    PC_9  = NC,
-    PC_10 = NC,
-    PC_11 = NC,
-    PC_12 = NC,
-    PC_13 = 0x2D,
-    PC_14 = 0x2E,
-    PC_15 = 0x2F,
-
-    PD_2  = NC,
-
-    // ADC internal channels
-    ADC_TEMP = 0xF0,
-    ADC_VREF = 0xF1,
-
-    // Arduino connector namings
-    A0          = PA_0,
-    A1          = PA_1,
-    A2          = PA_4,
-    A3          = PB_0,
-    A4          = NC,
-    A5          = NC,
-    D0          = PA_3,
-    D1          = PA_2,
-    D2          = PA_10,
-    D3          = PB_3,
-    D4          = PB_5,
-    D5          = PB_4,
-    D6          = PB_10,
-    D7          = PA_8,
-    D8          = PA_9,
-    D9          = NC,
-    D10         = PB_6,
-    D11         = PA_7,
-    D12         = PA_6,
-    D13         = PA_5,
-    D14         = PB_9,
-    D15         = PB_8,
-
-    // Generic signals namings
-    Red_Led     = NC,
-    Green_Led   = PC_13,
-    Blue_Led    = NC,
-    LED1        = PC_13,
-    LED2        = NC,
-    LED3        = NC,
-    LED4        = NC,
-    USER_BUTTON = NC,    
-    SERIAL_TX   = PA_2,
-    SERIAL_RX   = PA_3,
-    USBTX       = PA_12,
-    USBRX       = PA_11,
-    CANRX       = PB_8,    
-    CANTX       = PB_9,
-    I2C_SCL     = PB_6,
-    I2C_SDA     = PB_7,
-    SPI_MOSI    = PA_7,
-    SPI_MISO    = PA_6,
-    SPI_SCK     = PA_5,
-    SPI_CS      = PA_4,
-    TRACE_SWO   = PB_3,
-    SWO         = PB_3
-} PinName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif