Send NFC messages using NFC Shield V2.0 by SeeedStudio.
The program uses the standard Arduino shields SPI pins:
Signal | Pin |
SCK | D13 |
MISO | D12 |
MOSI | D11 |
CS | D10 |
Note that this shield doesn't use the standard SPI pins, but relies on non-standard 6-pin SPI header located at the shield bottom. To make it work you will have to bridge those pins as shown on the image (the green SPI pins).
Signal | Pin 1 | Pin 2 |
MOSI | D11 | SPI4 |
MISO | D12 | SPI1 |
SCK | D13 | SPI3 |
mbed.bld@3:c4590e900bbd, 2015-02-13 (annotated)
- Committer:
- screamer
- Date:
- Fri Feb 13 09:41:09 2015 +0000
- Revision:
- 3:c4590e900bbd
- Parent:
- 1:0d638a762bfd
Update mbed library.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
screamer | 3:c4590e900bbd | 1 | http://mbed.org/users/mbed_official/code/mbed/builds/e188a91d3eaa |