Send NFC messages using NFC Shield V2.0 by SeeedStudio.
The program uses the standard Arduino shields SPI pins:
Signal | Pin |
SCK | D13 |
MISO | D12 |
MOSI | D11 |
CS | D10 |
Note that this shield doesn't use the standard SPI pins, but relies on non-standard 6-pin SPI header located at the shield bottom. To make it work you will have to bridge those pins as shown on the image (the green SPI pins).
Signal | Pin 1 | Pin 2 |
MOSI | D11 | SPI4 |
MISO | D12 | SPI1 |
SCK | D13 | SPI3 |
PN532.lib
- Committer:
- screamer
- Date:
- 2015-02-13
- Revision:
- 3:c4590e900bbd
- Parent:
- 0:e403d7000b50
File content as of revision 3:c4590e900bbd:
http://mbed.org/teams/components/code/PN532/#26c1b3b6c192