Example program for the Ethernet Shield V2.0 by SeeedStudio. The example gets an IP address via DHCP and then requests http://mbed.org/media/uploads/mbed_official/hello.txt
Dependencies: WIZ820ioInterface mbed
main.cpp
00001 /* Copyright (c) 2010-2011 mbed.org, MIT License 00002 * 00003 * Permission is hereby granted, free of charge, to any person obtaining a copy of this software 00004 * and associated documentation files (the "Software"), to deal in the Software without 00005 * restriction, including without limitation the rights to use, copy, modify, merge, publish, 00006 * distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the 00007 * Software is furnished to do so, subject to the following conditions: 00008 * 00009 * The above copyright notice and this permission notice shall be included in all copies or 00010 * substantial portions of the Software. 00011 * 00012 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING 00013 * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 00014 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, 00015 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 00016 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 00017 */ 00018 00019 #include "mbed.h" 00020 #include "WIZ820ioInterface.h" 00021 00022 Serial pc(USBTX, USBRX); 00023 00024 /** 00025 * D11 - MOSI pin 00026 * D12 - MISO pin 00027 * D13 - SCK pin 00028 * D10 - SEL pin 00029 * NC - Reset pin; use D5 otherwise the shield might get into reset loop 00030 */ 00031 WIZ820ioInterface eth(D11, D12, D13, D10, D5); 00032 00033 int main() 00034 { 00035 wait(3); 00036 00037 // Initialize the interface. 00038 // If no param is passed to init() then DHCP will be used on connect() 00039 int s = eth.init(); 00040 if (s != NULL) { 00041 printf(">>> Could not initialise. Halting!\n"); 00042 exit(0); 00043 } 00044 00045 printf(">>> Get IP address...\n"); 00046 while (1) { 00047 s = eth.connect(); // Connect to network 00048 00049 if (s == false || s < 0) { 00050 printf(">>> Could not connect to network! Retrying ...\n"); 00051 wait(3); 00052 } else { 00053 break; 00054 } 00055 } 00056 printf(">>> Got IP address: %s\n", eth.getIPAddress()); 00057 00058 // Prepare the http request to mbed.org 00059 printf(">>> Open socket to mbed.org:80\n"); 00060 char http_cmd[] = "GET /media/uploads/mbed_official/hello.txt HTTP/1.0\n\n"; 00061 TCPSocketConnection sock; 00062 00063 while (sock.connect("mbed.org", 80) == -1) { 00064 printf(">>> Unable to open socket! Retrying ...\n"); 00065 }; 00066 00067 printf(">>> Request %s\n", http_cmd); 00068 sock.send_all(http_cmd, sizeof(http_cmd)-1); 00069 00070 // Read the response 00071 char buffer[300]; 00072 int ret; 00073 while (true) { 00074 ret = sock.receive(buffer, sizeof(buffer)-1); 00075 if (ret <= 0) 00076 break; 00077 buffer[ret] = '\0'; 00078 printf(">>> Received %d chars from mbed.org:\n%s\n", ret, buffer); 00079 } 00080 00081 printf(">>> Close socket\n"); 00082 sock.close(); 00083 00084 // Disconnect from network 00085 printf(">>> Disconnect from network\n"); 00086 eth.disconnect(); 00087 00088 return 0; 00089 }
Generated on Sat Jul 16 2022 21:50:09 by 1.7.2