Diff: targets/TARGET_NXP/TARGET_LPC15XX/can_api.c

Revision:

149:156823d33999

Parent:

144:ef7eb2e8f9f7

Child:

156:95d6b41a828b

diff -r 21d94c44109e -r 156823d33999 targets/TARGET_NXP/TARGET_LPC15XX/can_api.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NXP/TARGET_LPC15XX/can_api.c	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,487 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "can_api.h"
+
+#include "cmsis.h"
+#include "mbed_error.h"
+
+#include <math.h>
+#include <string.h>
+
+/* Handy defines */
+#define MSG_OBJ_MAX      32
+#define DLC_MAX          8
+
+#define ID_STD_MASK      0x07FF
+#define ID_EXT_MASK      0x1FFFFFFF
+#define DLC_MASK         0x0F
+
+#define CANIFn_ARB2_DIR         (1UL << 13)
+#define CANIFn_ARB2_XTD         (1UL << 14)
+#define CANIFn_ARB2_MSGVAL      (1UL << 15)
+#define CANIFn_MSK2_MXTD        (1UL << 15)
+#define CANIFn_MSK2_MDIR        (1UL << 14)
+#define CANIFn_MCTRL_EOB        (1UL << 7)
+#define CANIFn_MCTRL_TXRQST     (1UL << 8)
+#define CANIFn_MCTRL_RMTEN      (1UL << 9)
+#define CANIFn_MCTRL_RXIE       (1UL << 10)
+#define CANIFn_MCTRL_TXIE       (1UL << 11)
+#define CANIFn_MCTRL_UMASK      (1UL << 12)
+#define CANIFn_MCTRL_INTPND     (1UL << 13)
+#define CANIFn_MCTRL_MSGLST     (1UL << 14)
+#define CANIFn_MCTRL_NEWDAT     (1UL << 15)
+#define CANIFn_CMDMSK_DATA_B    (1UL << 0)
+#define CANIFn_CMDMSK_DATA_A    (1UL << 1)
+#define CANIFn_CMDMSK_TXRQST    (1UL << 2)
+#define CANIFn_CMDMSK_NEWDAT    (1UL << 2)
+#define CANIFn_CMDMSK_CLRINTPND (1UL << 3)
+#define CANIFn_CMDMSK_CTRL      (1UL << 4)
+#define CANIFn_CMDMSK_ARB       (1UL << 5)
+#define CANIFn_CMDMSK_MASK      (1UL << 6)
+#define CANIFn_CMDMSK_WR        (1UL << 7)
+#define CANIFn_CMDMSK_RD        (0UL << 7)
+#define CANIFn_CMDREQ_BUSY      (1UL << 15)
+
+#define CANCNTL_INIT                   (1 << 0)           // Initialization
+#define CANCNTL_IE                     (1 << 1)           // Module interrupt enable
+#define CANCNTL_SIE                    (1 << 2)           // Status change interrupt enable
+#define CANCNTL_EIE                    (1 << 3)           // Error interrupt enable
+#define CANCNTL_DAR                    (1 << 5)           // Disable automatic retransmission
+#define CANCNTL_CCE                    (1 << 6)           // Configuration change enable
+#define CANCNTL_TEST                   (1 << 7)           // Test mode enable
+
+#define CANTEST_BASIC                  (1 << 2)           // Basic mode
+#define CANTEST_SILENT                 (1 << 3)           // Silent mode
+#define CANTEST_LBACK                  (1 << 4)           // Loop back mode
+#define CANTEST_TX_MASK                0x0060             // Control of CAN_TXD pins
+#define CANTEST_TX_SHIFT               5                 
+#define CANTEST_RX                     (1 << 7)           // Monitors the actual value of the CAN_RXD pin.
+
+static uint32_t can_irq_id = 0;
+static can_irq_handler irq_handler;
+
+static inline void can_disable(can_t *obj) {
+    LPC_C_CAN0->CANCNTL |= 0x1;
+}
+
+static inline void can_enable(can_t *obj) {
+    if (LPC_C_CAN0->CANCNTL & 0x1) {
+        LPC_C_CAN0->CANCNTL &= ~(0x1);
+    }
+}
+
+int can_mode(can_t *obj, CanMode mode) {
+    int success = 0;
+    switch (mode) {
+        case MODE_RESET:
+            LPC_C_CAN0->CANCNTL &=~CANCNTL_TEST;
+            can_disable(obj);
+            success = 1;
+            break;
+        case MODE_NORMAL:
+            LPC_C_CAN0->CANCNTL &=~CANCNTL_TEST;
+            can_enable(obj);
+            success = 1;
+            break;
+        case MODE_SILENT:
+            LPC_C_CAN0->CANCNTL |= CANCNTL_TEST;
+            LPC_C_CAN0->CANTEST |= CANTEST_SILENT;
+            LPC_C_CAN0->CANTEST &=~ CANTEST_LBACK;
+            success = 1;
+            break;
+        case MODE_TEST_LOCAL:
+            LPC_C_CAN0->CANCNTL |= CANCNTL_TEST;
+            LPC_C_CAN0->CANTEST &=~CANTEST_SILENT;
+            LPC_C_CAN0->CANTEST |= CANTEST_LBACK;
+            success = 1;
+            break;
+        case MODE_TEST_SILENT:
+            LPC_C_CAN0->CANCNTL |= CANCNTL_TEST;
+            LPC_C_CAN0->CANTEST |= (CANTEST_LBACK | CANTEST_SILENT);
+            success = 1;
+            break;
+        case MODE_TEST_GLOBAL:
+        default:
+            success = 0;
+            break;
+    }
+    
+    return success;
+}
+
+int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle) {
+    uint16_t i;
+
+    // Find first free message object
+    if (handle == 0) {
+        uint32_t msgval = LPC_C_CAN0->CANMSGV1 | (LPC_C_CAN0->CANMSGV2 << 16);
+
+        // Find first free messagebox
+        for (i = 0; i < 32; i++) {
+            if ((msgval & (1 << i)) == 0) {
+                handle = i+1;
+                break;
+            }
+        }
+    }
+
+    if (handle > 0 && handle < 32) {
+        if (format == CANExtended) {
+            // Mark message valid, Direction = TX, Extended Frame, Set Identifier and mask everything
+            LPC_C_CAN0->CANIF1_ARB1 = (id & 0xFFFF);
+            LPC_C_CAN0->CANIF1_ARB2 = CANIFn_ARB2_MSGVAL | CANIFn_ARB2_XTD | ((id >> 16) & 0x1FFF);
+            LPC_C_CAN0->CANIF1_MSK1 = (mask & 0xFFFF);
+            LPC_C_CAN0->CANIF1_MSK2 = CANIFn_MSK2_MXTD /*| CANIFn_MSK2_MDIR*/ | ((mask >> 16) & 0x1FFF);
+        } else {
+            // Mark message valid, Direction = TX, Set Identifier and mask everything
+            LPC_C_CAN0->CANIF1_ARB2 = CANIFn_ARB2_MSGVAL | ((id << 2) & 0x1FFF);
+            LPC_C_CAN0->CANIF1_MSK2 = /*CANIFn_MSK2_MDIR |*/ ((mask << 2) & 0x1FFF);
+        }
+
+        // Use mask, single message object and set DLC
+        LPC_C_CAN0->CANIF1_MCTRL = CANIFn_MCTRL_UMASK | CANIFn_MCTRL_EOB | CANIFn_MCTRL_RXIE | (DLC_MAX & 0xF);
+
+        // Transfer all fields to message object
+        LPC_C_CAN0->CANIF1_CMDMSK_W = CANIFn_CMDMSK_WR | CANIFn_CMDMSK_MASK | CANIFn_CMDMSK_ARB | CANIFn_CMDMSK_CTRL;
+
+        // Start Transfer to given message number
+        LPC_C_CAN0->CANIF1_CMDREQ = (handle & 0x3F);
+
+        // Wait until transfer to message ram complete - TODO: maybe not block??
+        while ( LPC_C_CAN0->CANIF1_CMDREQ & CANIFn_CMDREQ_BUSY );
+    }
+
+    return handle;
+}
+
+static inline void can_irq() {
+    irq_handler(can_irq_id, IRQ_RX);
+}
+
+// Register CAN object's irq handler
+void can_irq_init(can_t *obj, can_irq_handler handler, uint32_t id) {
+    irq_handler = handler;
+    can_irq_id = id;
+}
+
+// Unregister CAN object's irq handler
+void can_irq_free(can_t *obj) {
+    LPC_C_CAN0->CANCNTL &= ~(1UL << 1); // Disable Interrupts :)
+    can_irq_id = 0;
+    NVIC_DisableIRQ(C_CAN0_IRQn);
+}
+
+// Clear or set a irq
+void can_irq_set(can_t *obj, CanIrqType type, uint32_t enable) {
+    // Put CAN in Reset Mode and enable interrupt
+    can_disable(obj);
+    if (enable == 0) {
+        LPC_C_CAN0->CANCNTL &= ~(1UL << 1 | 1UL << 2);
+    } else {
+        LPC_C_CAN0->CANCNTL |= 1UL << 1 | 1UL << 2;
+    }
+    // Take it out of reset...
+    can_enable(obj);
+
+    // Enable NVIC if at least 1 interrupt is active
+    NVIC_SetVector(C_CAN0_IRQn, (uint32_t) &can_irq);
+    NVIC_EnableIRQ(C_CAN0_IRQn);
+}
+
+// This table has the sampling points as close to 75% as possible. The first
+// value is TSEG1, the second TSEG2.
+static const int timing_pts[23][2] = {
+    {0x0, 0x0},      // 2,  50%
+    {0x1, 0x0},      // 3,  67%
+    {0x2, 0x0},      // 4,  75%
+    {0x3, 0x0},      // 5,  80%
+    {0x3, 0x1},      // 6,  67%
+    {0x4, 0x1},      // 7,  71%
+    {0x5, 0x1},      // 8,  75%
+    {0x6, 0x1},      // 9,  78%
+    {0x6, 0x2},      // 10, 70%
+    {0x7, 0x2},      // 11, 73%
+    {0x8, 0x2},      // 12, 75%
+    {0x9, 0x2},      // 13, 77%
+    {0x9, 0x3},      // 14, 71%
+    {0xA, 0x3},      // 15, 73%
+    {0xB, 0x3},      // 16, 75%
+    {0xC, 0x3},      // 17, 76%
+    {0xD, 0x3},      // 18, 78%
+    {0xD, 0x4},      // 19, 74%
+    {0xE, 0x4},      // 20, 75%
+    {0xF, 0x4},      // 21, 76%
+    {0xF, 0x5},      // 22, 73%
+    {0xF, 0x6},      // 23, 70%
+    {0xF, 0x7},      // 24, 67%
+};
+
+static unsigned int can_speed(unsigned int sclk, unsigned int cclk, unsigned char psjw) {
+    uint32_t    btr;
+    uint32_t    clkdiv = 1;
+    uint16_t    brp = 0;
+    uint32_t    calcbit;
+    uint32_t    bitwidth;
+    int         hit = 0;
+    int         bits = 0;
+
+    bitwidth = sclk / cclk;
+
+    brp = bitwidth / 0x18;
+    while ((!hit) && (brp < bitwidth / 4)) {
+        brp++;
+        for (bits = 22; bits > 0; bits--) {
+            calcbit = (bits + 3) * (brp + 1);
+            if (calcbit == bitwidth) {
+                hit = 1;
+                break;
+            }
+        }
+    }
+
+    clkdiv = clkdiv - 1;
+
+    if (hit) {
+        btr = (timing_pts[bits][1] & 0x7) << 12
+            | (timing_pts[bits][0] & 0xf) << 8
+            | (psjw & 0x3) << 6
+            | (brp & 0x3F);
+        btr = btr | (clkdiv << 16);
+    } else {
+        btr = 0;
+    }
+
+    return btr;
+}
+
+
+int can_config_rxmsgobj(can_t *obj) {
+    uint16_t i = 0;
+
+    // Make sure the interface is available
+    while ( LPC_C_CAN0->CANIF1_CMDREQ & CANIFn_CMDREQ_BUSY );
+
+    // Mark message valid, Direction = RX, Don't care about anything else
+    LPC_C_CAN0->CANIF1_ARB1 = 0;
+    LPC_C_CAN0->CANIF1_ARB2 = 0;
+    LPC_C_CAN0->CANIF1_MCTRL = 0;
+
+    for ( i = 0; i < MSG_OBJ_MAX; i++ ) {
+        // Transfer arb and control fields to message object
+        LPC_C_CAN0->CANIF1_CMDMSK_W = CANIFn_CMDMSK_WR | CANIFn_CMDMSK_ARB | CANIFn_CMDMSK_CTRL | CANIFn_CMDMSK_TXRQST;
+
+        // Start Transfer to given message number
+        LPC_C_CAN0->CANIF1_CMDREQ = (i & 0x3F);
+
+        // Wait until transfer to message ram complete - TODO: maybe not block??
+        while ( LPC_C_CAN0->CANIF1_CMDREQ & CANIFn_CMDREQ_BUSY );
+    }
+
+    // Accept all messages
+    can_filter(obj, 0, 0, CANStandard, 1);
+
+    return 1;
+}
+
+
+void can_init(can_t *obj, PinName rd, PinName td) {
+    // Enable power and clock
+    LPC_SYSCON->SYSAHBCLKCTRL1 |= (1UL << 7);
+    LPC_SYSCON->PRESETCTRL1    |= (1UL << 7);
+    LPC_SYSCON->PRESETCTRL1    &= ~(1UL << 7);
+
+    // Enable Initialization mode
+    if (!(LPC_C_CAN0->CANCNTL & (1UL << 0))) {
+        LPC_C_CAN0->CANCNTL |= (1UL << 0);
+    }
+
+    LPC_SWM->PINASSIGN[6] &= ~(0x00FFFF00L);
+    LPC_SWM->PINASSIGN[6] |= (rd << 16) | (td << 8);
+
+    can_frequency(obj, 100000);
+
+    // Resume operation
+    LPC_C_CAN0->CANCNTL &= ~(1UL << 0);
+    while ( LPC_C_CAN0->CANCNTL & (1UL << 0) );
+
+    // Initialize RX message object
+    can_config_rxmsgobj(obj);
+}
+
+void can_free(can_t *obj) {
+    LPC_SYSCON->SYSAHBCLKCTRL1 &= ~(1UL << 7);
+    LPC_SYSCON->PRESETCTRL1    &= ~(1UL << 7);
+}
+
+int can_frequency(can_t *obj, int f) {
+    int btr = can_speed(SystemCoreClock, (unsigned int)f, 1);
+    int clkdiv = (btr >> 16) & 0x0F;
+    btr = btr & 0xFFFF;
+
+    if (btr > 0) {
+        // Set the bit clock
+        LPC_C_CAN0->CANCNTL |= (1UL << 6 | 1UL << 0); // set CCE and INIT
+        LPC_C_CAN0->CANCLKDIV = clkdiv;
+        LPC_C_CAN0->CANBT = btr;
+        LPC_C_CAN0->CANBRPE = 0x0000;
+        LPC_C_CAN0->CANCNTL &= ~(1UL << 6 | 1UL << 0); // clear CCE and INIT
+        return 1;
+    }
+    return 0;
+}
+
+int can_write(can_t *obj, CAN_Message msg, int cc) {
+    uint16_t msgnum = 0;
+
+    // Make sure controller is enabled
+    can_enable(obj);
+
+    // Make sure the interface is available
+    while ( LPC_C_CAN0->CANIF1_CMDREQ & CANIFn_CMDREQ_BUSY );
+
+    // Set the direction bit based on the message type
+    uint32_t direction = 0;
+    if (msg.type == CANData) {
+        direction = CANIFn_ARB2_DIR;
+    }
+
+    if (msg.format == CANExtended)    {
+        // Mark message valid, Extended Frame, Set Identifier and mask everything
+        LPC_C_CAN0->CANIF1_ARB1 = (msg.id & 0xFFFF);
+        LPC_C_CAN0->CANIF1_ARB2 = CANIFn_ARB2_MSGVAL | CANIFn_ARB2_XTD | direction | ((msg.id >> 16) & 0x1FFFF);
+        LPC_C_CAN0->CANIF1_MSK1 = (ID_EXT_MASK & 0xFFFF);
+        LPC_C_CAN0->CANIF1_MSK2 = CANIFn_MSK2_MXTD | CANIFn_MSK2_MDIR | ((ID_EXT_MASK >> 16) & 0x1FFF);
+    } else {
+        // Mark message valid, Set Identifier and mask everything
+        LPC_C_CAN0->CANIF1_ARB2 = CANIFn_ARB2_MSGVAL | direction | ((msg.id << 2) & 0x1FFF);
+        LPC_C_CAN0->CANIF1_MSK2 = CANIFn_MSK2_MDIR | ((ID_STD_MASK << 2) & 0x1FFF);
+    }
+
+    // Use mask, request transmission, single message object and set DLC
+    LPC_C_CAN0->CANIF1_MCTRL = CANIFn_MCTRL_UMASK | CANIFn_MCTRL_TXRQST | CANIFn_MCTRL_EOB | (msg.len & 0xF);
+
+    LPC_C_CAN0->CANIF1_DA1 = ((msg.data[1] & 0xFF) << 8) | (msg.data[0] & 0xFF);
+    LPC_C_CAN0->CANIF1_DA2 = ((msg.data[3] & 0xFF) << 8) | (msg.data[2] & 0xFF);
+    LPC_C_CAN0->CANIF1_DB1 = ((msg.data[5] & 0xFF) << 8) | (msg.data[4] & 0xFF);
+    LPC_C_CAN0->CANIF1_DB2 = ((msg.data[7] & 0xFF) << 8) | (msg.data[6] & 0xFF);
+
+    // Transfer all fields to message object
+    LPC_C_CAN0->CANIF1_CMDMSK_W = CANIFn_CMDMSK_WR | CANIFn_CMDMSK_MASK | CANIFn_CMDMSK_ARB | CANIFn_CMDMSK_CTRL | CANIFn_CMDMSK_TXRQST | CANIFn_CMDMSK_DATA_A | CANIFn_CMDMSK_DATA_B;
+
+    // Start Transfer to given message number
+    LPC_C_CAN0->CANIF1_CMDREQ = (msgnum & 0x3F);
+
+    // Wait until transfer to message ram complete - TODO: maybe not block??
+    while ( LPC_C_CAN0->CANIF1_CMDREQ & CANIFn_CMDREQ_BUSY);
+
+    // Wait until TXOK is set, then clear it - TODO: maybe not block
+    //while ( !(LPC_C_CAN0->STAT & CANSTAT_TXOK) );
+    LPC_C_CAN0->CANSTAT &= ~(1UL << 3);
+
+    return 1;
+}
+
+int can_read(can_t *obj, CAN_Message *msg, int handle) {
+    uint16_t i;
+
+    // Make sure controller is enabled
+    can_enable(obj);
+
+    // Find first message object with new data
+    if (handle == 0) {
+        uint32_t newdata = LPC_C_CAN0->CANND1 | (LPC_C_CAN0->CANND2 << 16);
+        // Find first free messagebox
+        for (i = 0; i < 32; i++) {
+            if (newdata & (1 << i)) {
+                handle = i+1;
+                break;
+            }
+        }
+    }
+
+    if (handle > 0 && handle < 32) {
+        // Wait until message interface is free
+        while ( LPC_C_CAN0->CANIF2_CMDREQ & CANIFn_CMDREQ_BUSY );
+
+        // Transfer all fields to message object
+        LPC_C_CAN0->CANIF2_CMDMSK_W = CANIFn_CMDMSK_RD | CANIFn_CMDMSK_MASK | CANIFn_CMDMSK_ARB | CANIFn_CMDMSK_CTRL | CANIFn_CMDMSK_CLRINTPND | CANIFn_CMDMSK_TXRQST | CANIFn_CMDMSK_DATA_A | CANIFn_CMDMSK_DATA_B;
+
+        // Start Transfer from given message number
+        LPC_C_CAN0->CANIF2_CMDREQ = (handle & 0x3F);
+
+        // Wait until transfer to message ram complete
+        while ( LPC_C_CAN0->CANIF2_CMDREQ & CANIFn_CMDREQ_BUSY );
+
+        if (LPC_C_CAN0->CANIF2_ARB2 & CANIFn_ARB2_XTD) {
+            msg->format = CANExtended;
+            msg->id = (LPC_C_CAN0->CANIF2_ARB1 & 0x1FFF) << 16;
+            msg->id |= (LPC_C_CAN0->CANIF2_ARB2 & 0x1FFF);
+        } else {
+            msg->format = CANStandard;
+            msg->id = (LPC_C_CAN0->CANIF2_ARB2 & 0x1FFF) >> 2;
+        }
+
+       if (LPC_C_CAN0->CANIF2_ARB2 & CANIFn_ARB2_DIR) {
+            msg->type   = CANRemote;
+        }
+        else {
+            msg->type   = CANData;
+        }
+
+        msg->len        = (LPC_C_CAN0->CANIF2_MCTRL & 0xF); // TODO: If > 8, len = 8
+        msg->data[0]    = ((LPC_C_CAN0->CANIF2_DA1 >> 0) & 0xFF);
+        msg->data[1]    = ((LPC_C_CAN0->CANIF2_DA1 >> 8) & 0xFF);
+        msg->data[2]    = ((LPC_C_CAN0->CANIF2_DA2 >> 0) & 0xFF);
+        msg->data[3]    = ((LPC_C_CAN0->CANIF2_DA2 >> 8) & 0xFF);
+        msg->data[4]    = ((LPC_C_CAN0->CANIF2_DB1 >> 0) & 0xFF);
+        msg->data[5]    = ((LPC_C_CAN0->CANIF2_DB1 >> 8) & 0xFF);
+        msg->data[6]    = ((LPC_C_CAN0->CANIF2_DB2 >> 0) & 0xFF);
+        msg->data[7]    = ((LPC_C_CAN0->CANIF2_DB2 >> 8) & 0xFF);
+
+        LPC_C_CAN0->CANSTAT &= ~(1UL << 4);
+        return 1;
+    }
+    return 0;
+}
+
+void can_reset(can_t *obj) {
+    LPC_SYSCON->PRESETCTRL1 &= ~(1UL << 7);
+    LPC_C_CAN0->CANSTAT = 0;
+    can_config_rxmsgobj(obj);
+}
+
+unsigned char can_rderror(can_t *obj) {
+    return ((LPC_C_CAN0->CANEC >> 8) & 0x7F);
+}
+
+unsigned char can_tderror(can_t *obj) {
+    return (LPC_C_CAN0->CANEC & 0xFF);
+}
+
+void can_monitor(can_t *obj, int silent) {
+    if (silent) {
+        LPC_C_CAN0->CANCNTL |= (1UL << 7);
+        LPC_C_CAN0->CANTEST |= (1UL << 3);
+    } else {
+        LPC_C_CAN0->CANCNTL &= ~(1UL << 7);
+        LPC_C_CAN0->CANTEST &= ~(1UL << 3);
+    }
+
+    if (!(LPC_C_CAN0->CANCNTL & (1UL << 0))) {
+        LPC_C_CAN0->CANCNTL |= (1UL << 0);
+    }
+}