raspiezo / mbed-dev

hal_tick.h changed for the L432KC target in TARGET/../device/ in order to reassign the system ticker from TIM2 to TIM7, since TIM2 was needed as a 32bit encoder counter.

Dependents:   Nucleo_L432KC_Quadrature_Decoder_with_ADC_and_DAC

Fork of mbed-dev by mbed official

targets/TARGET_ARM_SSG/TARGET_BEETLE/PinNames.h@161:bd0311f1ad86, 2017-05-27 (annotated)

Committer:
tonnyleonard
Date:
Sat May 27 01:26:18 2017 +0000
Revision:
161:bd0311f1ad86
Parent:
149:156823d33999 
Testing ADC with shunt

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 * Copyright (c) 2015 ARM Limited
<> 144:ef7eb2e8f9f7 3 *
<> 144:ef7eb2e8f9f7 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 144:ef7eb2e8f9f7 5 * you may not use this file except in compliance with the License.
<> 144:ef7eb2e8f9f7 6 * You may obtain a copy of the License at
<> 144:ef7eb2e8f9f7 7 *
<> 144:ef7eb2e8f9f7 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 144:ef7eb2e8f9f7 9 *
<> 144:ef7eb2e8f9f7 10 * Unless required by applicable law or agreed to in writing, software
<> 144:ef7eb2e8f9f7 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 144:ef7eb2e8f9f7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 144:ef7eb2e8f9f7 13 * See the License for the specific language governing permissions and
<> 144:ef7eb2e8f9f7 14 * limitations under the License.
<> 144:ef7eb2e8f9f7 15 */
<> 144:ef7eb2e8f9f7 16 #ifndef MBED_PINNAMES_H
<> 144:ef7eb2e8f9f7 17 #define MBED_PINNAMES_H
<> 144:ef7eb2e8f9f7 18
<> 144:ef7eb2e8f9f7 19 #include "cmsis.h"
<> 144:ef7eb2e8f9f7 20
<> 144:ef7eb2e8f9f7 21 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 22 extern "C" {
<> 144:ef7eb2e8f9f7 23 #endif
<> 144:ef7eb2e8f9f7 24
<> 144:ef7eb2e8f9f7 25 typedef enum {
<> 144:ef7eb2e8f9f7 26 PIN_INPUT,
<> 144:ef7eb2e8f9f7 27 PIN_OUTPUT
<> 144:ef7eb2e8f9f7 28 } PinDirection;
<> 144:ef7eb2e8f9f7 29
<> 144:ef7eb2e8f9f7 30 #define PORT_SHIFT 5
<> 144:ef7eb2e8f9f7 31
<> 144:ef7eb2e8f9f7 32 typedef enum {
<> 144:ef7eb2e8f9f7 33 /* BEETLE Pin Names */
<> 144:ef7eb2e8f9f7 34 /* GPIO0 */
<> 144:ef7eb2e8f9f7 35 P0_0 = 0,
<> 144:ef7eb2e8f9f7 36 P0_1 = 1,
<> 144:ef7eb2e8f9f7 37 P0_2 = 2,
<> 144:ef7eb2e8f9f7 38 P0_3 = 3,
<> 144:ef7eb2e8f9f7 39 P0_4 = 4,
<> 144:ef7eb2e8f9f7 40 P0_5 = 5,
<> 144:ef7eb2e8f9f7 41 P0_6 = 6,
<> 144:ef7eb2e8f9f7 42 P0_7 = 7,
<> 144:ef7eb2e8f9f7 43 P0_8 = 8,
<> 144:ef7eb2e8f9f7 44 P0_9 = 9,
<> 144:ef7eb2e8f9f7 45 P0_10 = 10,
<> 144:ef7eb2e8f9f7 46 P0_11 = 11,
<> 144:ef7eb2e8f9f7 47 P0_12 = 12,
<> 144:ef7eb2e8f9f7 48 P0_13 = 13,
<> 144:ef7eb2e8f9f7 49 P0_14 = 14,
<> 144:ef7eb2e8f9f7 50 P0_15 = 15,
<> 144:ef7eb2e8f9f7 51
<> 144:ef7eb2e8f9f7 52 /* GPIO1 */
<> 144:ef7eb2e8f9f7 53 P1_0 = 16,
<> 144:ef7eb2e8f9f7 54 P1_1 = 17,
<> 144:ef7eb2e8f9f7 55 P1_2 = 18,
<> 144:ef7eb2e8f9f7 56 P1_3 = 19,
<> 144:ef7eb2e8f9f7 57 P1_4 = 20,
<> 144:ef7eb2e8f9f7 58 P1_5 = 21,
<> 144:ef7eb2e8f9f7 59 P1_6 = 22,
<> 144:ef7eb2e8f9f7 60 P1_7 = 23,
<> 144:ef7eb2e8f9f7 61 P1_8 = 24,
<> 144:ef7eb2e8f9f7 62 P1_9 = 25,
<> 144:ef7eb2e8f9f7 63 P1_10 = 26,
<> 144:ef7eb2e8f9f7 64 P1_11 = 27,
<> 144:ef7eb2e8f9f7 65 P1_12 = 28,
<> 144:ef7eb2e8f9f7 66 P1_13 = 29,
<> 144:ef7eb2e8f9f7 67 P1_14 = 30,
<> 144:ef7eb2e8f9f7 68 P1_15 = 31,
<> 144:ef7eb2e8f9f7 69
<> 144:ef7eb2e8f9f7 70 /* Arduino Connector Namings */
<> 144:ef7eb2e8f9f7 71 A0 = 600,
<> 144:ef7eb2e8f9f7 72 A1 = 601,
<> 144:ef7eb2e8f9f7 73 A2 = 602,
<> 144:ef7eb2e8f9f7 74 A3 = 603,
<> 144:ef7eb2e8f9f7 75 A4 = 604,
<> 144:ef7eb2e8f9f7 76 A5 = 605,
<> 144:ef7eb2e8f9f7 77 D0 = P0_0,
<> 144:ef7eb2e8f9f7 78 D1 = P0_1,
<> 144:ef7eb2e8f9f7 79 D2 = P0_2,
<> 144:ef7eb2e8f9f7 80 D3 = P0_3,
<> 144:ef7eb2e8f9f7 81 D4 = P0_4,
<> 144:ef7eb2e8f9f7 82 D5 = P0_5,
<> 144:ef7eb2e8f9f7 83 D6 = P0_6,
<> 144:ef7eb2e8f9f7 84 D7 = P0_7,
<> 144:ef7eb2e8f9f7 85 D8 = P0_8,
<> 144:ef7eb2e8f9f7 86 D9 = P0_9,
<> 144:ef7eb2e8f9f7 87 D10 = P0_10,
<> 144:ef7eb2e8f9f7 88 D11 = P0_11,
<> 144:ef7eb2e8f9f7 89 D12 = P0_12,
<> 144:ef7eb2e8f9f7 90 D13 = P0_13,
<> 144:ef7eb2e8f9f7 91 D14 = P0_14,
<> 144:ef7eb2e8f9f7 92 D15 = P0_15,
<> 144:ef7eb2e8f9f7 93
<> 144:ef7eb2e8f9f7 94 /* TRACE Ports */
<> 144:ef7eb2e8f9f7 95 TRACECLK = P0_2,
<> 144:ef7eb2e8f9f7 96 TRACED0 = P0_6,
<> 144:ef7eb2e8f9f7 97 TRACED1 = P0_7,
<> 144:ef7eb2e8f9f7 98 TRACED2 = P0_8,
<> 144:ef7eb2e8f9f7 99 TRACED3 = P0_9,
<> 144:ef7eb2e8f9f7 100
<> 144:ef7eb2e8f9f7 101 /* Other BEETLE Pin Names */
<> 144:ef7eb2e8f9f7 102
<> 144:ef7eb2e8f9f7 103 //Shield SPI
<> 144:ef7eb2e8f9f7 104 SHIELD_SPI_SCK = 320,
<> 144:ef7eb2e8f9f7 105 SHIELD_SPI_MOSI = 321,
<> 144:ef7eb2e8f9f7 106 SHIELD_SPI_MISO = 322,
<> 144:ef7eb2e8f9f7 107 SHIELD_SPI_nCS = 323,
<> 144:ef7eb2e8f9f7 108
<> 144:ef7eb2e8f9f7 109 //ADC SPI
<> 144:ef7eb2e8f9f7 110 ADC_SPI_MOSI = 650,
<> 144:ef7eb2e8f9f7 111 ADC_SPI_MISO = 651,
<> 144:ef7eb2e8f9f7 112 ADC_SPI_SCK = 652,
<> 144:ef7eb2e8f9f7 113 ADC_SPI_nCS = 653,
<> 144:ef7eb2e8f9f7 114
<> 144:ef7eb2e8f9f7 115 //Uart
<> 144:ef7eb2e8f9f7 116 UART_TX0 = 400,
<> 144:ef7eb2e8f9f7 117 UART_RX0 = 401,
<> 144:ef7eb2e8f9f7 118 UART_TX1 = 402,
<> 144:ef7eb2e8f9f7 119 UART_RX1 = 403,
<> 144:ef7eb2e8f9f7 120
<> 144:ef7eb2e8f9f7 121 //Shield I2C
<> 144:ef7eb2e8f9f7 122 SHIELD_SDA = 504,
<> 144:ef7eb2e8f9f7 123 SHIELD_SCL = 505,
<> 144:ef7eb2e8f9f7 124
<> 144:ef7eb2e8f9f7 125 // Internal I2C for temperature and acceleromter sensor
<> 144:ef7eb2e8f9f7 126 SENSOR_SDA = 506,
<> 144:ef7eb2e8f9f7 127 SENSOR_SCL = 507,
<> 144:ef7eb2e8f9f7 128
<> 144:ef7eb2e8f9f7 129 // Emulated LEDS
<> 144:ef7eb2e8f9f7 130 /*
<> 144:ef7eb2e8f9f7 131 * Beetle board is built to optimize power consumption therefore does not
<> 144:ef7eb2e8f9f7 132 * provide on-board LEDs. The configuration below is provided only for
<> 144:ef7eb2e8f9f7 133 * compatibility purposes with MBED test suite.
<> 144:ef7eb2e8f9f7 134 * The LEDs [1:4] are emulated and trapped in our GPIO driver.
<> 144:ef7eb2e8f9f7 135 * For more details on how to use a Led on an external PIN via GPIO
<> 144:ef7eb2e8f9f7 136 * configuration please refer to the connected community page below:
<> 144:ef7eb2e8f9f7 137 * https://community.arm.com/docs/DOC-11713
<> 144:ef7eb2e8f9f7 138 */
<> 144:ef7eb2e8f9f7 139 LED1 = 1001,
<> 144:ef7eb2e8f9f7 140 LED2 = 1002,
<> 144:ef7eb2e8f9f7 141 LED3 = 1003,
<> 144:ef7eb2e8f9f7 142 LED4 = 1004,
<> 144:ef7eb2e8f9f7 143
<> 144:ef7eb2e8f9f7 144 // Not connected
<> 144:ef7eb2e8f9f7 145 NC = (int)0xFFFFFFFF,
<> 144:ef7eb2e8f9f7 146 } PinName;
<> 144:ef7eb2e8f9f7 147
<> 144:ef7eb2e8f9f7 148 typedef enum {
<> 144:ef7eb2e8f9f7 149 PullUp = 2,
<> 144:ef7eb2e8f9f7 150 PullDown = 1,
<> 144:ef7eb2e8f9f7 151 PullNone = 0,
<> 144:ef7eb2e8f9f7 152 Repeater = 3,
<> 144:ef7eb2e8f9f7 153 OpenDrain = 4,
<> 144:ef7eb2e8f9f7 154 PullDefault = PullDown
<> 144:ef7eb2e8f9f7 155 } PinMode;
<> 144:ef7eb2e8f9f7 156
<> 144:ef7eb2e8f9f7 157 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 158 }
<> 144:ef7eb2e8f9f7 159 #endif
<> 144:ef7eb2e8f9f7 160
<> 144:ef7eb2e8f9f7 161 #endif