Diff: BEAR_Protocol.cpp

Revision:

14:24d951efed53

Parent:

12:6296cb35f853

Child:

15:13640152de69

--- a/BEAR_Protocol.cpp	Wed Jan 27 12:53:16 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1167 +0,0 @@
-#include "mbed.h"
-#include "BEAR_Protocol.h"
-#define RS485_DELAY 90
-#define FLOAT_CONVERTER 10000
-
-DigitalOut rs485_dirc(RS485_DIRC);
-
-Bear_Communicate::Bear_Communicate(PinName tx,PinName rx,int baudrate)
-{
-    com = new COMMUNICATION(tx,rx,baudrate);
-}
-
-
-
-void Bear_Communicate::FloatSep(float input_float,uint8_t *int_data_array,uint8_t *float_data_array)
-{
-    float float_buffer;
-    float int_buffer;
-    int16_t integer;
-    int16_t floating_point;
-
-    float_buffer=modf(input_float,&int_buffer);
-    float_buffer*=FLOAT_CONVERTER;
-    integer=(int16_t)int_buffer;
-    floating_point=(int16_t)float_buffer;
-    Utilities::ConvertInt16ToUInt8Array(integer,int_data_array);
-    Utilities::ConvertInt16ToUInt8Array(floating_point,float_data_array);
-}
-
-
-
-uint8_t Bear_Communicate::saveDataToEEPROM(uint8_t id,uint8_t save_data)
-{
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 4;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=SAVE_EEPROM_DATA;
-    package.parameter[1]=save_data;
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-uint8_t Bear_Communicate::setID(uint8_t id,uint8_t new_id)
-{
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 4;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=ID;
-    package.parameter[1]=new_id;
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::setMotorPos(uint8_t id,float up_angle,float low_angle)
-{
-    uint8_t IntUpAngle[2],FloatUpAngle[2];
-    uint8_t IntLowAngle[2],FloatLowAngle[2];
-    FloatSep(up_angle,IntUpAngle,FloatUpAngle);
-    FloatSep(low_angle,IntLowAngle,FloatLowAngle);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 11;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=MOTOR_UPPER_ANG;
-    package.parameter[1]=IntUpAngle[0];
-    package.parameter[2]=IntUpAngle[1];
-    package.parameter[3]=FloatUpAngle[0];
-    package.parameter[4]=FloatUpAngle[1];
-    package.parameter[5]=IntLowAngle[0];
-    package.parameter[6]=IntLowAngle[1];
-    package.parameter[7]=FloatLowAngle[0];
-    package.parameter[8]=FloatLowAngle[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getMotorPos(uint8_t id,float *up_angle,float *low_angle)
-{
-    uint8_t IntUpAngle[2],FloatUpAngle[2];
-    uint8_t IntLowAngle[2],FloatLowAngle[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0] = MOTOR_UPPER_ANG;
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status = com->receiveCommunicatePacket(&package);
-
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntUpAngle[0]=package.parameter[0];
-        IntUpAngle[1]=package.parameter[1];
-        FloatUpAngle[0]=package.parameter[2];
-        FloatUpAngle[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntUpAngle);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatUpAngle)/FLOAT_CONVERTER;
-        *up_angle=int_buffer+float_buffer;
-
-        IntLowAngle[0]=package.parameter[4];
-        IntLowAngle[1]=package.parameter[5];
-        FloatLowAngle[0]=package.parameter[6];
-        FloatLowAngle[1]=package.parameter[7];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntLowAngle);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatLowAngle)/FLOAT_CONVERTER;
-        *low_angle=int_buffer+float_buffer;
-    }
-#ifdef ANDANTE_DEBUG    
-    else
-    {
-        printf("get error [%d]\n\r",status);    
-    }
-#endif        
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::setUpMotorKp(uint8_t id,float Kp)
-{
-    uint8_t IntKp[2],FloatKp[2];
-    FloatSep(Kp,IntKp,FloatKp);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=KP_UPPER_MOTOR;
-    package.parameter[1]=IntKp[0];
-    package.parameter[2]=IntKp[1];
-    package.parameter[3]=FloatKp[0];
-    package.parameter[4]=FloatKp[1];
-
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-
-uint8_t Bear_Communicate::setLowMotorKp(uint8_t id,float Kp)
-{
-    uint8_t IntKp[2],FloatKp[2];
-    FloatSep(Kp,IntKp,FloatKp);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=KP_LOWER_MOTOR;
-    package.parameter[1]=IntKp[0];
-    package.parameter[2]=IntKp[1];
-    package.parameter[3]=FloatKp[0];
-    package.parameter[4]=FloatKp[1];
-
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-
-uint8_t Bear_Communicate::setUpMotorKi(uint8_t id,float Ki)
-{
-    uint8_t IntKi[2],FloatKi[2];
-    FloatSep(Ki,IntKi,FloatKi);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=KI_UPPER_MOTOR;
-    package.parameter[1]=IntKi[0];
-    package.parameter[2]=IntKi[1];
-    package.parameter[3]=FloatKi[0];
-    package.parameter[4]=FloatKi[1];
-
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-
-}
-
-
-
-
-uint8_t Bear_Communicate::setLowMotorKi(uint8_t id,float Ki)
-{
-    uint8_t IntKi[2],FloatKi[2];
-    FloatSep(Ki,IntKi,FloatKi);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=KI_LOWER_MOTOR;
-    package.parameter[1]=IntKi[0];
-    package.parameter[2]=IntKi[1];
-    package.parameter[3]=FloatKi[0];
-    package.parameter[4]=FloatKi[1];
-
-
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-
-}
-
-
-
-uint8_t Bear_Communicate::setUpMotorKd(uint8_t id,float Kd)
-{
-    uint8_t IntKd[2],FloatKd[2];
-    FloatSep(Kd,IntKd,FloatKd);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=KD_UPPER_MOTOR;
-    package.parameter[1]=IntKd[0];
-    package.parameter[2]=IntKd[1];
-    package.parameter[3]=FloatKd[0];
-    package.parameter[4]=FloatKd[1];
-
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::setLowMotorKd(uint8_t id,float Kd)
-{
-    uint8_t IntKd[2],FloatKd[2];
-    FloatSep(Kd,IntKd,FloatKd);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=KD_LOWER_MOTOR;
-    package.parameter[1]=IntKd[0];
-    package.parameter[2]=IntKd[1];
-    package.parameter[3]=FloatKd[0];
-    package.parameter[4]=FloatKd[1];
-
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getUpMotorKpKiKd(uint8_t id,float *Kp,float *Ki,float *Kd)
-{
-    uint8_t IntKp[2],FloatKp[2];
-    uint8_t IntKi[2],FloatKi[2];
-    uint8_t IntKd[2],FloatKd[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=PID_UPPER_MOTOR;
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status = com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntKp[0]=package.parameter[0];
-        IntKp[1]=package.parameter[1];
-        FloatKp[0]=package.parameter[2];
-        FloatKp[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntKp);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatKp)/FLOAT_CONVERTER;
-        *Kp=int_buffer+float_buffer;
-
-        IntKi[0]=package.parameter[4];
-        IntKi[1]=package.parameter[5];
-        FloatKi[0]=package.parameter[6];
-        FloatKi[1]=package.parameter[7];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntKi);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatKi)/FLOAT_CONVERTER;
-        *Ki=int_buffer+float_buffer;
-
-        IntKi[0]=package.parameter[8];
-        IntKi[1]=package.parameter[9];
-        FloatKi[0]=package.parameter[10];
-        FloatKi[1]=package.parameter[11];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntKd);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatKd)/FLOAT_CONVERTER;
-        *Kd=int_buffer+float_buffer;
-    }
-    return status;
-}
-
-
-uint8_t Bear_Communicate::getLowMotorKpKiKd(uint8_t id,float *Kp,float *Ki,float *Kd)
-{
-    uint8_t IntKp[2],FloatKp[2];
-    uint8_t IntKi[2],FloatKi[2];
-    uint8_t IntKd[2],FloatKd[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=PID_LOWER_MOTOR;
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status = com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntKp[0]=package.parameter[0];
-        IntKp[1]=package.parameter[1];
-        FloatKp[0]=package.parameter[2];
-        FloatKp[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntKp);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatKp)/FLOAT_CONVERTER;
-        *Kp=int_buffer+float_buffer;
-
-        IntKi[0]=package.parameter[4];
-        IntKi[1]=package.parameter[5];
-        FloatKi[0]=package.parameter[6];
-        FloatKi[1]=package.parameter[7];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntKi);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatKi)/FLOAT_CONVERTER;
-        *Ki=int_buffer+float_buffer;
-
-        IntKi[0]=package.parameter[8];
-        IntKi[1]=package.parameter[9];
-        FloatKi[0]=package.parameter[10];
-        FloatKi[1]=package.parameter[11];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntKd);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatKd)/FLOAT_CONVERTER;
-        *Kd=int_buffer+float_buffer;
-    }
-    return status;
-}
-
-
-
-
-///////////////////////////////////////////// Save Data to EEPROM \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
-
-
-uint8_t Bear_Communicate::setUpMargin(uint8_t id,float margin)
-{
-    uint8_t IntMargin[2],FloatMargin[2];
-    FloatSep(margin,IntMargin,FloatMargin);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=UP_MARGIN;
-    package.parameter[1]=IntMargin[0];
-    package.parameter[2]=IntMargin[1];
-    package.parameter[3]=FloatMargin[0];
-    package.parameter[4]=FloatMargin[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-uint8_t Bear_Communicate::setLowMargin(uint8_t id,float margin)
-{
-    uint8_t IntMargin[2],FloatMargin[2];
-    FloatSep(margin,IntMargin,FloatMargin);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=LOW_MARGIN;
-    package.parameter[1]=IntMargin[0];
-    package.parameter[2]=IntMargin[1];
-    package.parameter[3]=FloatMargin[0];
-    package.parameter[4]=FloatMargin[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getUpMargin(uint8_t id,float *margin)
-{
-    uint8_t IntMargin[2],FloatMargin[2];
-    float int_buffer,float_buffer;
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=UP_MARGIN;
-
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status=com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntMargin[0]=package.parameter[0];
-        IntMargin[1]=package.parameter[1];
-        FloatMargin[0]=package.parameter[2];
-        FloatMargin[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntMargin);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatMargin)/FLOAT_CONVERTER;
-        *margin=int_buffer+float_buffer;
-    }
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getLowMargin(uint8_t id,float *margin)
-{
-    uint8_t IntMargin[2],FloatMargin[2];
-    float int_buffer,float_buffer;
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=LOW_MARGIN;
-
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status=com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntMargin[0]=package.parameter[0];
-        IntMargin[1]=package.parameter[1];
-        FloatMargin[0]=package.parameter[2];
-        FloatMargin[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntMargin);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatMargin)/FLOAT_CONVERTER;
-        *margin=int_buffer+float_buffer;
-    }
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::setHeight(uint8_t id,float height)
-{
-    uint8_t IntHeight[2],FloatHeight[2];
-    FloatSep(height,IntHeight,FloatHeight);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=HEIGHT;
-    package.parameter[1]=IntHeight[0];
-    package.parameter[2]=IntHeight[1];
-    package.parameter[3]=FloatHeight[0];
-    package.parameter[4]=FloatHeight[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getHeight(uint8_t id,float *height)
-{
-    uint8_t IntHeight[2],FloatHeight[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=HEIGHT;
-
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status=com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntHeight[0]=package.parameter[0];
-        IntHeight[1]=package.parameter[1];
-        FloatHeight[0]=package.parameter[2];
-        FloatHeight[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntHeight);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatHeight)/FLOAT_CONVERTER;
-        *height=int_buffer+float_buffer;
-    }
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::setWheelPos(uint8_t id,float WheelPos)
-{
-    uint8_t IntWheelPos[2],FloatWheelPos[2];
-    FloatSep(WheelPos,IntWheelPos,FloatWheelPos);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=WHEELPOS;
-    package.parameter[1]=IntWheelPos[0];
-    package.parameter[2]=IntWheelPos[1];
-    package.parameter[3]=FloatWheelPos[0];
-    package.parameter[4]=FloatWheelPos[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getWheelPos(uint8_t id,float *WheelPos)
-{
-    uint8_t IntWheelPos[2],FloatWheelPos[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=WHEELPOS;
-
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status=com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntWheelPos[0]=package.parameter[0];
-        IntWheelPos[1]=package.parameter[1];
-        FloatWheelPos[0]=package.parameter[2];
-        FloatWheelPos[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntWheelPos);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatWheelPos)/FLOAT_CONVERTER;
-        *WheelPos=int_buffer+float_buffer;
-    }
-    return status;
-}
-
-uint8_t Bear_Communicate::setMagData(uint8_t id,float x_max,float x_min,float y_max,float y_min,float z_max,float z_min)
-{
-    uint8_t IntXmax[2],FloatXmax[2];
-    uint8_t IntXmin[2],FloatXmin[2];
-    uint8_t IntYmax[2],FloatYmax[2];
-    uint8_t IntYmin[2],FloatYmin[2];
-    uint8_t IntZmax[2],FloatZmax[2];
-    uint8_t IntZmin[2],FloatZmin[2];
-    FloatSep(x_max,IntXmax,FloatXmax);
-    FloatSep(x_min,IntXmin,FloatXmin);
-    FloatSep(y_max,IntYmax,FloatYmax);
-    FloatSep(y_min,IntYmin,FloatYmin);
-    FloatSep(z_max,IntZmax,FloatZmax);
-    FloatSep(z_min,IntZmin,FloatZmin);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 27;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=MOTOR_UPPER_ANG;
-    package.parameter[1]=IntXmax[0];
-    package.parameter[2]=IntXmax[1];
-    package.parameter[3]=FloatXmax[0];
-    package.parameter[4]=FloatXmax[1];
-    package.parameter[5]=IntXmin[0];
-    package.parameter[6]=IntXmin[1];
-    package.parameter[7]=FloatXmin[0];
-    package.parameter[8]=FloatXmin[1];
-    package.parameter[9]=IntYmax[0];
-    package.parameter[10]=IntYmax[1];
-    package.parameter[11]=FloatYmax[0];
-    package.parameter[12]=FloatYmax[1];
-    package.parameter[13]=IntYmin[0];
-    package.parameter[14]=IntYmin[1];
-    package.parameter[15]=FloatYmin[0];
-    package.parameter[16]=FloatYmin[1];
-    package.parameter[17]=IntZmax[0];
-    package.parameter[18]=IntZmax[1];
-    package.parameter[19]=FloatZmax[0];
-    package.parameter[20]=FloatZmax[1];
-    package.parameter[21]=IntZmin[0];
-    package.parameter[22]=IntZmin[1];
-    package.parameter[23]=FloatZmin[0];
-    package.parameter[24]=FloatZmin[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-
-}
-
-uint8_t Bear_Communicate::getMagData(uint8_t id,float *x_max,float *x_min,float *y_max,float *y_min,float *z_max,float *z_min)
-{
-    uint8_t IntXmax[2],FloatXmax[2];
-    uint8_t IntXmin[2],FloatXmin[2];
-    uint8_t IntYmax[2],FloatYmax[2];
-    uint8_t IntYmin[2],FloatYmin[2];
-    uint8_t IntZmax[2],FloatZmax[2];
-    uint8_t IntZmin[2],FloatZmin[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=MAG_DATA;
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status = com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntXmax[0]=package.parameter[0];
-        IntXmax[1]=package.parameter[1];
-        FloatXmax[0]=package.parameter[2];
-        FloatXmax[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntXmax);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatXmax)/FLOAT_CONVERTER;
-        *x_max=int_buffer+float_buffer;
-
-        IntXmin[0]=package.parameter[4];
-        IntXmin[1]=package.parameter[5];
-        FloatXmin[0]=package.parameter[6];
-        FloatXmin[1]=package.parameter[7];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntXmin);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatXmin)/FLOAT_CONVERTER;
-        *x_min=int_buffer+float_buffer;
-
-        IntYmax[0]=package.parameter[8];
-        IntYmax[1]=package.parameter[9];
-        FloatYmax[0]=package.parameter[10];
-        FloatYmax[1]=package.parameter[11];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntYmax);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatYmax)/FLOAT_CONVERTER;
-        *y_max=int_buffer+float_buffer;
-
-        IntYmin[0]=package.parameter[12];
-        IntYmin[1]=package.parameter[13];
-        FloatYmin[0]=package.parameter[14];
-        FloatYmin[1]=package.parameter[15];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntYmin);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatYmin)/FLOAT_CONVERTER;
-        *y_min=int_buffer+float_buffer;
-
-        IntZmax[0]=package.parameter[16];
-        IntZmax[1]=package.parameter[17];
-        FloatZmax[0]=package.parameter[18];
-        FloatZmax[1]=package.parameter[19];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntZmax);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatZmax)/FLOAT_CONVERTER;
-        *z_max=int_buffer+float_buffer;
-
-        IntZmin[0]=package.parameter[20];
-        IntZmin[1]=package.parameter[21];
-        FloatZmin[0]=package.parameter[22];
-        FloatZmin[1]=package.parameter[23];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntZmin);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatZmin)/FLOAT_CONVERTER;
-        *z_min=int_buffer+float_buffer;
-
-    }
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::setOffset(uint8_t id,float offset_y,float offset_z)
-{
-    uint8_t IntOffset_Y[2],FloatOffset_Y[2];
-    uint8_t IntOffset_Z[2],FloatOffset_Z[2];
-    FloatSep(offset_y,IntOffset_Y,FloatOffset_Y);
-    FloatSep(offset_z,IntOffset_Z,FloatOffset_Z);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 11;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=OFFSET;
-    package.parameter[1]=IntOffset_Y[0];
-    package.parameter[2]=IntOffset_Y[1];
-    package.parameter[3]=FloatOffset_Y[0];
-    package.parameter[4]=FloatOffset_Y[1];
-    package.parameter[5]=IntOffset_Z[0];
-    package.parameter[6]=IntOffset_Z[1];
-    package.parameter[7]=FloatOffset_Z[0];
-    package.parameter[8]=FloatOffset_Z[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getOffset(uint8_t id,float *offset_y,float *offset_z)
-{
-    uint8_t IntOffset_Y[2],FloatOffset_Y[2];
-    uint8_t IntOffset_Z[2],FloatOffset_Z[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0] = OFFSET;
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status = com->receiveCommunicatePacket(&package);
-
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntOffset_Y[0]=package.parameter[0];
-        IntOffset_Y[1]=package.parameter[1];
-        FloatOffset_Y[0]=package.parameter[2];
-        FloatOffset_Y[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntOffset_Y);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatOffset_Y)/FLOAT_CONVERTER;
-        *offset_y=int_buffer+float_buffer;
-
-        IntOffset_Z[0]=package.parameter[4];
-        IntOffset_Z[1]=package.parameter[5];
-        FloatOffset_Z[0]=package.parameter[6];
-        FloatOffset_Z[1]=package.parameter[7];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntOffset_Z);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatOffset_Z)/FLOAT_CONVERTER;
-        *offset_z=int_buffer+float_buffer;
-
-    }
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::setBodyWidth(uint8_t id,float body_width)
-{
-    uint8_t IntBodyWidth[2],FloatBodyWidth[2];
-    FloatSep(body_width,IntBodyWidth,FloatBodyWidth);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=BODY_WIDTH;
-    package.parameter[1]=IntBodyWidth[0];
-    package.parameter[2]=IntBodyWidth[1];
-    package.parameter[3]=FloatBodyWidth[0];
-    package.parameter[4]=FloatBodyWidth[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-
-uint8_t Bear_Communicate::getBodyWidth(uint8_t id,float *body_width)
-{
-    uint8_t IntBodyWidth[2],FloatBodyWidth[2];
-    float int_buffer,float_buffer;
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=BODY_WIDTH;
-
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status=com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntBodyWidth[0]=package.parameter[0];
-        IntBodyWidth[1]=package.parameter[1];
-        FloatBodyWidth[0]=package.parameter[2];
-        FloatBodyWidth[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntBodyWidth);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatBodyWidth)/FLOAT_CONVERTER;
-        *body_width=int_buffer+float_buffer;
-    }
-    return status;
-}
-
-
-uint8_t Bear_Communicate::setUpAngleRange(uint8_t id,float max_angle,float min_angle)
-{
-    uint8_t IntMaxAngle[2],FloatMaxAngle[2];
-    uint8_t IntMinAngle[2],FloatMinAngle[2];
-    FloatSep(max_angle,IntMaxAngle,FloatMaxAngle);
-    FloatSep(min_angle,IntMinAngle,FloatMinAngle);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 11;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=ANGLE_RANGE_UP;
-    package.parameter[1]=IntMaxAngle[0];
-    package.parameter[2]=IntMaxAngle[1];
-    package.parameter[3]=FloatMaxAngle[0];
-    package.parameter[4]=FloatMaxAngle[1];
-    package.parameter[5]=IntMinAngle[0];
-    package.parameter[6]=IntMinAngle[1];
-    package.parameter[7]=FloatMinAngle[0];
-    package.parameter[8]=FloatMinAngle[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-uint8_t Bear_Communicate::setLowAngleRange(uint8_t id,float max_angle,float min_angle)
-{
-    uint8_t IntMaxAngle[2],FloatMaxAngle[2];
-    uint8_t IntMinAngle[2],FloatMinAngle[2];
-    FloatSep(max_angle,IntMaxAngle,FloatMaxAngle);
-    FloatSep(min_angle,IntMinAngle,FloatMinAngle);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 11;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=ANGLE_RANGE_LOW;
-    package.parameter[1]=IntMaxAngle[0];
-    package.parameter[2]=IntMaxAngle[1];
-    package.parameter[3]=FloatMaxAngle[0];
-    package.parameter[4]=FloatMaxAngle[1];
-    package.parameter[5]=IntMinAngle[0];
-    package.parameter[6]=IntMinAngle[1];
-    package.parameter[7]=FloatMinAngle[0];
-    package.parameter[8]=FloatMinAngle[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-
-uint8_t Bear_Communicate::getUpAngleRange(uint8_t id,float *max_angle,float *min_angle)
-{
-    uint8_t IntMaxAngle[2],FloatMaxAngle[2];
-    uint8_t IntMinAngle[2],FloatMinAngle[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0] = ANGLE_RANGE_UP;
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status = com->receiveCommunicatePacket(&package);
-
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntMaxAngle[0]=package.parameter[0];
-        IntMaxAngle[1]=package.parameter[1];
-        FloatMaxAngle[0]=package.parameter[2];
-        FloatMaxAngle[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntMaxAngle);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatMaxAngle)/FLOAT_CONVERTER;
-        *max_angle=int_buffer+float_buffer;
-
-        IntMinAngle[0]=package.parameter[4];
-        IntMinAngle[1]=package.parameter[5];
-        FloatMinAngle[0]=package.parameter[6];
-        FloatMinAngle[1]=package.parameter[7];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntMinAngle);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatMinAngle)/FLOAT_CONVERTER;
-        *min_angle=int_buffer+float_buffer;
-
-    }
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getLowAngleRange(uint8_t id,float *max_angle,float *min_angle)
-{
-    uint8_t IntMaxAngle[2],FloatMaxAngle[2];
-    uint8_t IntMinAngle[2],FloatMinAngle[2];
-    float int_buffer,float_buffer;
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0] = ANGLE_RANGE_LOW;
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status = com->receiveCommunicatePacket(&package);
-
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntMaxAngle[0]=package.parameter[0];
-        IntMaxAngle[1]=package.parameter[1];
-        FloatMaxAngle[0]=package.parameter[2];
-        FloatMaxAngle[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntMaxAngle);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatMaxAngle)/FLOAT_CONVERTER;
-        *max_angle=int_buffer+float_buffer;
-
-        IntMinAngle[0]=package.parameter[4];
-        IntMinAngle[1]=package.parameter[5];
-        FloatMinAngle[0]=package.parameter[6];
-        FloatMinAngle[1]=package.parameter[7];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntMinAngle);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatMinAngle)/FLOAT_CONVERTER;
-        *min_angle=int_buffer+float_buffer;
-
-    }
-    return status;
-}
-
-
-uint8_t Bear_Communicate::setUpLinkLength(uint8_t id,float length)
-{
-    uint8_t IntLength[2],FloatLength[2];
-    FloatSep(length,IntLength,FloatLength);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=UP_LINK_LENGTH;
-    package.parameter[1]=IntLength[0];
-    package.parameter[2]=IntLength[1];
-    package.parameter[3]=FloatLength[0];
-    package.parameter[4]=FloatLength[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-uint8_t Bear_Communicate::getUpLinkLength(uint8_t id,float *length)
-{
-    uint8_t IntLength[2],FloatLength[2];
-    float int_buffer,float_buffer;
-    ANDANTE_PROTOCOL_PACKET package;
-    
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=UP_LINK_LENGTH;
-
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status=com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntLength[0]=package.parameter[0];
-        IntLength[1]=package.parameter[1];
-        FloatLength[0]=package.parameter[2];
-        FloatLength[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntLength);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatLength)/FLOAT_CONVERTER;
-        *length=int_buffer+float_buffer;
-    }
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::setLowLinkLength(uint8_t id,float length)
-{
-    uint8_t IntLength[2],FloatLength[2];
-    FloatSep(length,IntLength,FloatLength);
-
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 7;
-    package.instructionErrorId = WRITE_DATA;
-    package.parameter[0]=LOW_LINK_LENGTH;
-    package.parameter[1]=IntLength[0];
-    package.parameter[2]=IntLength[1];
-    package.parameter[3]=FloatLength[0];
-    package.parameter[4]=FloatLength[1];
-
-    rs485_dirc=1;
-    uint8_t status = com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-    return status;
-}
-
-
-
-uint8_t Bear_Communicate::getLowLinkLength(uint8_t id,float *length)
-{
-    uint8_t IntLength[2],FloatLength[2];
-    float int_buffer,float_buffer;
-    ANDANTE_PROTOCOL_PACKET package;
-
-    package.robotId = id;
-    package.length = 3;
-    package.instructionErrorId = READ_DATA;
-    package.parameter[0]=LOW_LINK_LENGTH;
-
-
-    rs485_dirc=1;
-    //wait_us(RS485_DELAY);
-    com->sendCommunicatePacket(&package);
-    wait_us(RS485_DELAY);
-
-    rs485_dirc=0;
-    //wait_us(RS485_DELAY);
-    uint8_t status=com->receiveCommunicatePacket(&package);
-    if(status == ANDANTE_ERRBIT_NONE) {
-        IntLength[0]=package.parameter[0];
-        IntLength[1]=package.parameter[1];
-        FloatLength[0]=package.parameter[2];
-        FloatLength[1]=package.parameter[3];
-        int_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(IntLength);
-        float_buffer=(float)Utilities::ConvertUInt8ArrayToInt16(FloatLength)/FLOAT_CONVERTER;
-        *length=int_buffer+float_buffer;
-    }
-    return status;
-}
\ No newline at end of file