Diff: mbed-os-example-ble-master/BLE_Thermometer/shields/TARGET_ST_BLUENRG/bluenrg/bluenrg-hci/ble_status.h

Revision:

0:599bc564478b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os-example-ble-master/BLE_Thermometer/shields/TARGET_ST_BLUENRG/bluenrg/bluenrg-hci/ble_status.h	Fri Jun 29 01:19:08 2018 +0000
@@ -0,0 +1,188 @@
+/******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
+* File Name          : ble_status.h
+* Author             : AMS - HEA&RF BU
+* Version            : V1.0.0
+* Date               : 19-July-2012
+* Description        : Header file with BLE Stack status codes.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+#ifndef __BLE_STATUS_H__
+#define __BLE_STATUS_H__
+
+#include <ble_hal_types.h>
+
+/** @addtogroup Middlewares
+ *  @{
+ */
+
+/** @defgroup ST
+ *  @{
+ */
+ 
+/** @defgroup SimpleBlueNRG_HCI
+ *  @{
+ */
+
+/** @defgroup ble_status Bluetooth Status/Error Codes
+ * @{
+ */
+ 
+typedef uint8_t tBleStatus; 
+
+/* Error Codes as specified by the specification 
+ * according to the spec the error codes range
+ * from 0x00 to 0x3F 
+ */
+/**
+ * @name Standard error codes
+ * @brief Standard error codes. See Core v 4.1, Vol. 2, part D.
+ * @{
+ */
+#define ERR_CMD_SUCCESS         	                (0x00)
+#define BLE_STATUS_SUCCESS            		        (0x00)
+#define ERR_UNKNOWN_HCI_COMMAND	                    (0x01)
+#define ERR_UNKNOWN_CONN_IDENTIFIER	                (0x02)
+
+#define ERR_AUTH_FAILURE                            (0x05)
+#define ERR_PIN_OR_KEY_MISSING                      (0x06)
+#define ERR_MEM_CAPACITY_EXCEEDED                   (0x07)
+#define ERR_CONNECTION_TIMEOUT                      (0x08)
+
+#define ERR_COMMAND_DISALLOWED				        (0x0C)
+
+#define ERR_UNSUPPORTED_FEATURE				        (0x11)
+#define ERR_INVALID_HCI_CMD_PARAMS                  (0x12)
+#define ERR_RMT_USR_TERM_CONN                       (0x13)
+#define ERR_RMT_DEV_TERM_CONN_LOW_RESRCES           (0x14)
+#define ERR_RMT_DEV_TERM_CONN_POWER_OFF             (0x15)
+#define ERR_LOCAL_HOST_TERM_CONN                    (0x16)
+
+#define ERR_UNSUPP_RMT_FEATURE                      (0x1A)
+
+#define ERR_INVALID_LMP_PARAM                       (0x1E)
+#define ERR_UNSPECIFIED_ERROR                       (0x1F)
+
+#define ERR_LL_RESP_TIMEOUT                         (0x22)
+#define ERR_LMP_PDU_NOT_ALLOWED                     (0x24)
+
+#define ERR_INSTANT_PASSED                          (0x28)
+
+#define ERR_PAIR_UNIT_KEY_NOT_SUPP                  (0x29)
+#define ERR_CONTROLLER_BUSY                         (0x3A)
+
+#define ERR_DIRECTED_ADV_TIMEOUT                    (0x3C)
+
+#define ERR_CONN_END_WITH_MIC_FAILURE               (0x3D)
+
+#define ERR_CONN_FAILED_TO_ESTABLISH                (0x3E)
+
+
+/**
+ * @}
+ */
+/**
+ * @name Vendor-specific error codes
+ * @brief Error codes defined by ST related to BlueNRG stack
+ * @{
+ */
+/**
+ * The command cannot be executed due to the current state of the device.
+ */
+#define BLE_STATUS_FAILED             		(0x41)
+/**
+ * Some parameters are invalid.
+ */
+#define BLE_STATUS_INVALID_PARAMS     		(0x42)
+/**
+ * It is not allowed to start the procedure (e.g. another the procedure is ongoing
+ * or cannot be started on the given handle).
+ */
+#define BLE_STATUS_NOT_ALLOWED        		(0x46)
+/**
+ * Unexpected error.
+ */
+#define BLE_STATUS_ERROR              		(0x47)
+#define BLE_STATUS_ADDR_NOT_RESOLVED        (0x48)
+
+#define FLASH_READ_FAILED 					(0x49)
+#define FLASH_WRITE_FAILED 					(0x4A)
+#define FLASH_ERASE_FAILED 					(0x4B)
+
+#define BLE_STATUS_INVALID_CID         		(0x50)
+
+#define TIMER_NOT_VALID_LAYER				(0x54)
+#define TIMER_INSUFFICIENT_RESOURCES		(0x55)
+ 
+#define BLE_STATUS_CSRK_NOT_FOUND			(0x5A)
+#define BLE_STATUS_IRK_NOT_FOUND			(0x5B)
+#define BLE_STATUS_DEV_NOT_FOUND_IN_DB		(0x5C)
+#define BLE_STATUS_SEC_DB_FULL				(0x5D)
+#define BLE_STATUS_DEV_NOT_BONDED           (0x5E)
+#define BLE_STATUS_DEV_IN_BLACKLIST         (0x5F)
+ 
+#define BLE_STATUS_INVALID_HANDLE           (0x60)
+#define BLE_STATUS_INVALID_PARAMETER        (0x61)
+#define BLE_STATUS_OUT_OF_HANDLE            (0x62)
+#define BLE_STATUS_INVALID_OPERATION        (0x63)
+#define BLE_STATUS_INSUFFICIENT_RESOURCES   (0x64)
+#define BLE_INSUFFICIENT_ENC_KEYSIZE		(0x65)
+#define BLE_STATUS_CHARAC_ALREADY_EXISTS    (0x66)
+
+/**
+ * Returned when no valid slots are available (e.g. when there are no available state machines).
+  */
+#define BLE_STATUS_NO_VALID_SLOT                (0x82)
+
+/**
+ * Returned when a scan window shorter than minimum allowed value has been requested (i.e. 2ms)
+ */
+ 
+#define BLE_STATUS_SCAN_WINDOW_SHORT            (0x83)
+/**
+ * Returned when the maximum requested interval to be allocated is shorter then the current
+ * anchor period and a there is no submultiple for the current anchor period that is between
+ * the minimum and the maximum requested intervals.
+ */
+
+#define BLE_STATUS_NEW_INTERVAL_FAILED          (0x84)
+/**
+ * Returned when the maximum requested interval to be allocated is greater than the current anchor
+ * period and there is no multiple of the anchor period that is between the minimum and the maximum
+ * requested intervals.
+ */
+
+#define BLE_STATUS_INTERVAL_TOO_LARGE           (0x85)
+/**
+ * Returned when the current anchor period or a new one can be found that is compatible to the
+ * interval range requested by the new slot but the maximum available length that can be allocated is
+ * less than the minimum requested slot length.
+ */
+ 
+#define BLE_STATUS_LENGTH_FAILED                (0x86)
+/**
+ * @}
+ */
+
+/**
+ * @name Library Error Codes
+ * @brief Error codes defined by ST related to MCU library.
+ * @{
+ */
+#define BLE_STATUS_TIMEOUT                      (0xFF)
+#define BLE_STATUS_PROFILE_ALREADY_INITIALIZED  (0xF0)
+#define BLE_STATUS_NULL_PARAM                   (0xF1) 
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+ 
+#endif /* __BLE_STATUS_H__ */