Revision 0:d60fd3a04add, committed 2018-06-29

Comitter:

bpd227

Date:

Fri Jun 29 01:13:46 2018 +0000

Commit message:

test?

Changed in this revision

diff -r 000000000000 -r d60fd3a04add BLE_API.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API.lib	Fri Jun 29 01:13:46 2018 +0000
@@ -0,0 +1,1 @@
+https://developer.mbed.org/teams/Bluetooth-Low-Energy/code/BLE_API/#65474dc93927

diff -r 000000000000 -r d60fd3a04add main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Jun 29 01:13:46 2018 +0000
@@ -0,0 +1,114 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "ble/BLE.h"
+#include "ble/services/HealthThermometerService.h"
+
+DigitalOut led1(LED1);
+
+static HealthThermometerService *thermometerServicePtr;
+
+static const char     DEVICE_NAME[]        = "Therm";
+static const uint16_t uuid16_list[]        = {GattService::UUID_HEALTH_THERMOMETER_SERVICE};
+static volatile bool  triggerSensorPolling = false;
+static float          currentTemperature   = 39.6;
+
+/* Restart Advertising on disconnection*/
+void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params)
+{
+    BLE::Instance().gap().startAdvertising();
+}
+
+void periodicCallback(void)
+{
+    led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */
+
+    /* Note that the periodicCallback() executes in interrupt context, so it is safer to do
+     * heavy-weight sensor polling from the main thread. */
+    triggerSensorPolling = true;
+}
+
+/**
+ * This function is called when the ble initialization process has failed
+ */
+void onBleInitError(BLE &ble, ble_error_t error)
+{
+    /* Avoid compiler warnings */
+    (void) ble;
+    (void) error;
+    /* Initialization error handling should go here */
+}
+
+/**
+ * Callback triggered when the ble initialization process has finished
+ */
+void bleInitComplete(BLE::InitializationCompleteCallbackContext *params)
+{
+    BLE&        ble   = params->ble;
+    ble_error_t error = params->error;
+
+    if (error != BLE_ERROR_NONE) {
+        /* In case of error, forward the error handling to onBleInitError */
+        onBleInitError(ble, error);
+        return;
+    }
+
+    /* Ensure that it is the default instance of BLE */
+    if(ble.getInstanceID() != BLE::DEFAULT_INSTANCE) {
+        return;
+    }
+
+    ble.gap().onDisconnection(disconnectionCallback);
+
+    /* Setup primary service. */
+    thermometerServicePtr = new HealthThermometerService(ble, currentTemperature, HealthThermometerService::LOCATION_EAR);
+
+    /* setup advertising */
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::THERMOMETER_EAR);
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
+    ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
+    ble.gap().setAdvertisingInterval(1000); /* 1000ms */
+    ble.gap().startAdvertising();    
+}
+
+int main(void)
+{
+    led1 = 1;
+    Ticker ticker;
+    ticker.attach(periodicCallback, 1);
+
+    BLE &ble = BLE::Instance();
+    ble.init(bleInitComplete);
+    
+    /* SpinWait for initialization to complete. This is necessary because the
+     * BLE object is used in the main loop below. */
+    while (ble.hasInitialized()  == false) { /* spin loop */ }
+
+    while (true) {
+        if (triggerSensorPolling && ble.gap().getState().connected) {
+            triggerSensorPolling = false;
+
+            /* In our case, we simply update the dummy temperature measurement. */
+            currentTemperature += 0.1;
+            thermometerServicePtr->updateTemperature(currentTemperature);
+        } else {
+            ble.waitForEvent();
+        }
+    }
+}

diff -r 000000000000 -r d60fd3a04add mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Jun 29 01:13:46 2018 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/5aab5a7997ee
\ No newline at end of file

diff -r 000000000000 -r d60fd3a04add mbed_app.json
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app.json	Fri Jun 29 01:13:46 2018 +0000
@@ -0,0 +1,13 @@
+{
+    "target_overrides": {
+        "K64F": {
+            "target.features_add": ["BLE"],
+            "target.extra_labels_add": ["ST_BLUENRG"],
+            "target.macros_add": ["IDB0XA1_D13_PATCH"]
+        },
+        "NUCLEO_F401RE": {
+            "target.features_add": ["BLE"],
+            "target.extra_labels_add": ["ST_BLUENRG"]
+        }
+    }
+}
\ No newline at end of file

diff -r 000000000000 -r d60fd3a04add nRF51822.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nRF51822.lib	Fri Jun 29 01:13:46 2018 +0000
@@ -0,0 +1,1 @@
+https://mbed.org/teams/Nordic-Semiconductor/code/nRF51822/#c90ae1400bf2

diff -r 000000000000 -r d60fd3a04add shields/TARGET_ST_BLUENRG.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/shields/TARGET_ST_BLUENRG.lib	Fri Jun 29 01:13:46 2018 +0000
@@ -0,0 +1,1 @@
+https://developer.mbed.org/teams/ST/code/X_NUCLEO_IDB0XA1/#fa98703ece8e