nexpaq
nexpaq development module demo for MAX3010x sensor
Dependencies: MAX30105 nexpaq_mdk
Fork of
ALS_Prox_Demo
by 
nexpaq
Temp Prox Demo
MAX32625NEXPAQ development module
This project is a demonstration application for the MAX32625NEXPAQ development module and a MAX3010x sensor.
This project demonstrates polling the proximity sensor to use it like a button and also polling the temperature sensor and sending the information back to the application running on the phone, and the phone controlling the threshold for the proximity sensor and controlling the on board RGB LED to create different colors.
nexpaq App Tile Files
Diff: main.cpp
- Revision:
- 0:b86eda0e990d
- Child:
- 2:3842948024ca
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat Sep 17 16:21:40 2016 +0000
@@ -0,0 +1,80 @@
+#include "mbed.h"
+#include "nexpaq_mdk.h"
+
+DigitalOut ledR(P2_4, LED_OFF);
+DigitalOut ledG(P2_5, LED_OFF);
+DigitalOut ledB(P2_6, LED_OFF);
+DigitalIn button(P0_1, PullUp);
+
+/***** Definitions *****/
+#define FUNCTION_TABLE_NUM 1
+#define UUID_NUM 16 //UUID number is 16, don't change it
+#define BUTTON_DEBOUNCE 5
+#define DBG_MSG
+
+/***** Globals *****/
+void my_function_CMD_2700(unsigned char *pData, unsigned char len);
+const MDK_REGISTER_CMD my_cmd_func_table[FUNCTION_TABLE_NUM] = {
+ {0x2700, my_function_CMD_2700}, // Command -> function
+};
+
+int btnCnt = 0;
+int btnSts = 0;
+unsigned char btnPress = 0x01;
+
+/***** Functions *****/
+void my_function_CMD_2700(unsigned char *pData, unsigned char len){
+ unsigned char response = 0x00;
+ ledR = (pData[0]>0) ? LED_ON : LED_OFF ;
+ ledG = (pData[1]>0) ? LED_ON : LED_OFF ;
+ ledB = (pData[2]>0) ? LED_ON : LED_OFF ;
+ np_api_upload(0x2701, &response, 1);
+#ifdef DBG_MSG
+ printf("LED Command Received\n\r");
+#endif
+}
+
+/******************************************************************************/
+void app_setup(){
+// np_api_set_app_version(0, 0, 3);
+ if ( np_api_register((MDK_REGISTER_CMD*)my_cmd_func_table, FUNCTION_TABLE_NUM) == MDK_REGISTER_FAILD ) {
+ // Register failed handle code
+ error("MDK Register Failed");
+ }
+#ifdef DBG_MSG
+ printf("MDK Commands Registered\n\r");
+#endif
+}
+
+void app_loop() {
+ if (btnSts) {
+ btnCnt = (button) ? 0 : (btnCnt + 1);
+ if (btnCnt >= BUTTON_DEBOUNCE) {
+ np_api_upload(0x2800, &btnPress, 1);
+ btnSts = !btnSts;
+ btnCnt = 0;
+#ifdef DBG_MSG
+ printf("Button Pressed\n\r");
+#endif
+ }
+ } else {
+ btnCnt = (!button) ? 0 : (btnCnt + 1);
+ if (btnCnt >= BUTTON_DEBOUNCE) {
+ btnSts = !btnSts;
+ btnCnt = 0;
+ }
+ }
+}
+
+int main(void){
+ np_api_init();
+ app_setup();
+ np_api_start();
+ while(1){
+ app_loop();
+ np_api_bsl_chk();
+ Thread::wait(50);
+ }
+ return 0;
+}
+