Diff: YDwifiInterface.cpp

Revision:

8:50d2509479cd

Parent:

7:e88ccbe0225f

Child:

9:a98b45e766c8

diff -r e88ccbe0225f -r 50d2509479cd YDwifiInterface.cpp
--- a/YDwifiInterface.cpp	Fri Mar 14 08:48:12 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,545 +0,0 @@
-#include "YDwifiInterface.h"
-#include "YDwifi_uartmsg.h"
-
-using namespace murata_wifi;
-
-#define MEMPOOL_BLOCK_SIZE  2048
-typedef struct
-{
-    unsigned char buf[MEMPOOL_BLOCK_SIZE];
-}tagMEMPOOL_BLOCK_T;
-#define MEMPOOL_PAYLOAD_NUM 1
-/** MemoryPool for payload of UART response */
-MemoryPool<tagMEMPOOL_BLOCK_T, MEMPOOL_PAYLOAD_NUM>     gMEMPOOL_PAYLOAD;
-
-#define UART_REQUEST_PAYLOAD_MAX    256
-
-C_YDwifiInterface::C_YDwifiInterface( PinName tx, PinName rx, PinName cts, PinName rts, PinName reset, PinName alarm, int baud):
-    C_YDwifi(tx, rx, cts, rts, reset, alarm, baud)
-{
-}
-
-int C_YDwifiInterface::init()
-{
-    /* Initialize UART */
-    initUart();
-    return 0;
-}
-
-int C_YDwifiInterface::getFWVersion( unsigned char *version_p )
-{
-    // Get buffer for response payload from MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = gMEMPOOL_PAYLOAD.alloc();
-    if( payload_buf == NULL )
-    {
-        printf("getFWVersion payload_buf NULL\r\n");
-        return -1;
-    }
-
-    tagGEN_FW_VER_GET_REQ_T req;
-    unsigned char  payload_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char  command_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned short payload_len;
-    unsigned int   command_len;
-    int ret;
-    
-    // Make request
-    req.cmd_sid = UART_CMD_SID_GEN_FW_VER_GET_REQ;
-    req.seq     = mUartRequestSeq++;
-    
-    // Make command payload
-    payload_len = C_YD_UartMsg::makePayload( sizeof(tagGEN_FW_VER_GET_REQ_T), (unsigned char *)&req, payload_array );
-    // Make all command request
-    command_len = C_YD_UartMsg::makeRequest( UART_CMD_ID_GEN, payload_array, payload_len, command_array );
-
-    // Set data for response
-    mUartCommand.setCommandID( UART_CMD_ID_GEN );
-    mUartCommand.setCommandSID( req.cmd_sid );
-    mUartCommand.setResponseBuf( payload_buf->buf );
-    
-    // Send uart command request
-    sendUart( command_len, command_array );
-    
-    // Wait UART response
-    ret = mUartCommand.wait();
-    if( ret != 0 )
-    {
-        printf( "getFWversion failed\r\n" );
-        gMEMPOOL_PAYLOAD.free( payload_buf );
-        return -1;
-    }
-    
-    if( mUartCommand.getCommandStatus() == 0 )
-    {
-        unsigned char version_len = payload_buf->buf[3];
-        memcpy( version_p, &payload_buf->buf[4], version_len );
-    }
-    gMEMPOOL_PAYLOAD.free( payload_buf );
-    return 0;
-}
-
-int C_YDwifiInterface::connect(const char *ssid_p, unsigned char ssid_len, E_SECURITY sec_type
-                            , const char *sec_key_p, unsigned char sec_key_len)
-{
-    // Parameter check(SSID)
-    if( (ssid_p == NULL) || (ssid_len == 0) )
-    {
-        printf( "connect failed [ parameter NG:SSID ]\r\n" );
-        return -1;
-    }
-    
-    // Parameter check(Security key)
-    if( (sec_type != e_SEC_OPEN) && ( (sec_key_len == 0) || (sec_key_p == NULL) ) )
-    {
-        printf( "connect failed [ parameter NG:Security key ]\r\n" );
-        return -1;
-    }
-    
-    // Get buffer for response payloadfrom MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = gMEMPOOL_PAYLOAD.alloc();
-    if( payload_buf == NULL )
-    {
-        printf("connect payload_buf NULL\r\n");
-        return -1;
-    }
-
-    unsigned char  buf[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char  payload_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char  command_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned int   buf_len = 0;
-    unsigned short payload_len;
-    unsigned int   command_len;
-    int ret;
-
-    memset( buf, 0, UART_REQUEST_PAYLOAD_MAX );
-    // Make request
-    buf[0] = UART_CMD_SID_WIFI_JOIN_REQ;
-    buf_len++;
-    buf[1] = mUartRequestSeq++;
-    buf_len++;
-    // SSID
-    memcpy( &buf[2], ssid_p, ssid_len );
-    buf_len += ssid_len;
-    buf_len++;
-    
-    // Security mode
-    buf[ buf_len ] = (unsigned char)sec_type;
-    buf_len++;
-
-    // Security key
-    if( sec_type != e_SEC_OPEN )
-    {
-        buf[ buf_len ] = sec_key_len;
-        buf_len++;
-        if( sec_key_len > 0 )
-        {
-            memcpy( &buf[buf_len], sec_key_p, sec_key_len );
-            buf_len += sec_key_len;
-        }
-    }
-    // Make command payload
-    payload_len = C_YD_UartMsg::makePayload( buf_len, (unsigned char *)buf, payload_array );
-    // Make all command request
-    command_len = C_YD_UartMsg::makeRequest( UART_CMD_ID_WIFI, payload_array, payload_len, command_array );
-    // Set data for response
-    mUartCommand.setCommandID( UART_CMD_ID_WIFI );
-    mUartCommand.setCommandSID( UART_CMD_SID_WIFI_JOIN_REQ );
-    mUartCommand.setResponseBuf( payload_buf->buf );
-    
-    // Send uart command request
-    sendUart( command_len, command_array );
-    
-    // Wait UART response
-    ret = mUartCommand.wait();
-    if( ret != 0 )
-    {
-        printf( "join failed\r\n" );
-        gMEMPOOL_PAYLOAD.free( payload_buf );
-        return -1;
-    }
-    
-    if( mUartCommand.getCommandStatus() != 0 )
-    {
-        printf("join status:%02x\r\n", mUartCommand.getCommandStatus());
-        ret = -1;
-    }
-    gMEMPOOL_PAYLOAD.free( payload_buf );
-
-    return ret;
-}
-
-int C_YDwifiInterface::disconnect()
-{
-    // Get buffer for response payloadfrom MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = gMEMPOOL_PAYLOAD.alloc();
-    if( payload_buf == NULL )
-    {
-        printf("disconnect payload_buf NULL\r\n");
-        return -1;
-    }
-
-    tagWIFI_DISCONNECT_REQ_T req;
-    unsigned char payload_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char command_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned short payload_len;
-    unsigned int   command_len;
-    int ret;
-    
-    // Make request
-    req.cmd_sid = UART_CMD_SID_WIFI_DISCONNECT_REQ;
-    req.seq = mUartRequestSeq++;
-    
-    // Make command payload
-    payload_len = C_YD_UartMsg::makePayload( sizeof(tagWIFI_DISCONNECT_REQ_T), (unsigned char *)&req, payload_array );
-    // Make all command request
-    command_len = C_YD_UartMsg::makeRequest( UART_CMD_ID_WIFI, payload_array, payload_len, command_array );
-
-    // Set data for response
-    mUartCommand.setCommandID( UART_CMD_ID_WIFI );
-    mUartCommand.setCommandSID( req.cmd_sid );
-    mUartCommand.setResponseBuf( payload_buf->buf );
-    
-    // Send uart command request
-    sendUart( command_len, command_array );
-    
-    // Wait UART response
-    ret = mUartCommand.wait();
-    if( ret != 0 )
-    {
-        printf( "disconnect failed\r\n" );
-        gMEMPOOL_PAYLOAD.free( payload_buf );
-        return -1;
-    }
-    
-    if( mUartCommand.getCommandStatus() != 0 )
-    {
-        printf("disconnect status:%02x\r\n", mUartCommand.getCommandStatus());
-        ret = -1;
-    }
-    gMEMPOOL_PAYLOAD.free( payload_buf );
-    return ret;
-}
-
-int C_YDwifiInterface::scan( const char *ssid_p, unsigned char *bssid_p
-                        , void (*result_handler_p)(tagSCAN_RESULT_T *scan_result) )
-{
-    // Get buffer for response payloadfrom MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = gMEMPOOL_PAYLOAD.alloc();
-    if( payload_buf == NULL )
-    {
-        printf("scan payload_buf NULL\r\n");
-        return -1;
-    }
-    
-    tagWIFI_SCAN_REQ_T req;
-    unsigned char payload_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char command_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned short payload_len;
-    unsigned int   command_len;
-    unsigned int   buf_len = 0;
-    int ret;
-    
-    memset( &req, 0, sizeof(tagWIFI_SCAN_REQ_T) );
-    // Make request
-    req.cmd_sid = UART_CMD_SID_WIFI_SCAN_REQ;
-    buf_len++;
-    req.seq = mUartRequestSeq++;
-    buf_len++;
-    
-    // Set scan type(Active scan)
-    req.scan_type = 0;
-    buf_len++;
-    // Set bss type(any)
-    req.bss_type = 2;
-    buf_len++;
-    // Set BSSID
-    if( bssid_p != NULL )
-    {
-        memcpy( req.bssid, bssid_p, BSSID_MAC_LENTH );
-    }
-    buf_len += BSSID_MAC_LENTH;
-    // Set channel list(0)
-    req.chan_list = 0;
-    buf_len++;
-    //Set SSID
-    if( ssid_p != NULL )
-    {
-        strcpy( (char *)req.ssid, ssid_p );
-        buf_len += strlen(ssid_p);
-    }
-    buf_len++;
-
-    // Make command payload
-    payload_len = C_YD_UartMsg::makePayload( buf_len, (unsigned char *)&req, payload_array );
-
-    // Make all command request
-    command_len = C_YD_UartMsg::makeRequest( UART_CMD_ID_WIFI, payload_array, payload_len, command_array );
-
-    // Set data for response
-    mUartCommand.setCommandID( UART_CMD_ID_WIFI );
-    mUartCommand.setCommandSID( req.cmd_sid );
-    mUartCommand.setResponseBuf( payload_buf->buf );
-    // Set scan result callback 
-    mUartCommand.setScanResultHandler( result_handler_p );
-    
-    // Send uart command request
-    sendUart( command_len, command_array );
-
-    // Wait UART response
-    ret = mUartCommand.wait();
-    printf( "scan wait:%d\r\n", ret );
-    if( ret != 0 )
-    {
-        printf( "scan failed\r\n" );
-        gMEMPOOL_PAYLOAD.free( payload_buf );
-        return -1;
-    }
-    
-    if( mUartCommand.getCommandStatus() != 0 )
-    {
-        printf("scan status:%02x\r\n", mUartCommand.getCommandStatus());
-        ret = -1;
-    }
-
-    gMEMPOOL_PAYLOAD.free( payload_buf );
-
-    return ret;
-}
-
-int C_YDwifiInterface::wifi_on( const char *country_p )
-{
-    // Parameter check
-    if( country_p == NULL )
-    {
-        printf("wifi_on parameter error\r\n");
-        return -1;
-    }
-    
-    // Get buffer for response payloadfrom MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = gMEMPOOL_PAYLOAD.alloc();
-    if( payload_buf == NULL )
-    {
-        printf("wifi_on payload_buf NULL\r\n");
-        return -1;
-    }
-
-    tagWIFI_ON_REQ_T req;
-    unsigned char payload_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char command_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned short payload_len;
-    unsigned int   command_len;
-    int ret;
-    
-    // Make request
-    req.cmd_sid = UART_CMD_SID_WIFI_ON_REQ;
-    req.seq = mUartRequestSeq++;
-    memcpy( req.country, country_p, COUNTRYC_CODE_LENTH );
-    
-    // Make command payload
-    payload_len = C_YD_UartMsg::makePayload( sizeof(tagWIFI_ON_REQ_T), (unsigned char *)&req, payload_array );
-    // Make all command request
-    command_len = C_YD_UartMsg::makeRequest( UART_CMD_ID_WIFI, payload_array, payload_len, command_array );
-
-    // Set data for response
-    mUartCommand.setCommandID( UART_CMD_ID_WIFI );
-    mUartCommand.setCommandSID( req.cmd_sid );
-    mUartCommand.setResponseBuf( payload_buf->buf );
-    
-    // Send uart command request
-    sendUart( command_len, command_array );
-    
-    // Wait UART response
-    ret = mUartCommand.wait();
-    if( ret != 0 )
-    {
-        printf( "wifi_on failed\r\n" );
-        gMEMPOOL_PAYLOAD.free( payload_buf );
-        return -1;
-    }
-    
-    if( mUartCommand.getCommandStatus() != 0 )
-    {
-        printf("wifi_on status:%02x\r\n", mUartCommand.getCommandStatus());
-        ret = -1;
-    }
-    gMEMPOOL_PAYLOAD.free( payload_buf );
-
-    return ret;
-}
-
-int C_YDwifiInterface::wifi_off()
-{
-    // Get buffer for response payloadfrom MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = gMEMPOOL_PAYLOAD.alloc();
-    if( payload_buf == NULL )
-    {
-        printf("wifi_off payload_buf NULL\r\n");
-        return -1;
-    }
-
-    tagWIFI_OFF_REQ_T req;
-    unsigned char payload_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char command_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned short payload_len;
-    unsigned int   command_len;
-    int ret;
-    
-    // Make request
-    req.cmd_sid = UART_CMD_SID_WIFI_OFF_REQ;
-    req.seq = mUartRequestSeq++;
-    
-    // Make command payload
-    payload_len = C_YD_UartMsg::makePayload( sizeof(tagWIFI_OFF_REQ_T), (unsigned char *)&req, payload_array );
-    // Make all command request
-    command_len = C_YD_UartMsg::makeRequest( UART_CMD_ID_WIFI, payload_array, payload_len, command_array );
-
-    // Set data for response
-    mUartCommand.setCommandID( UART_CMD_ID_WIFI );
-    mUartCommand.setCommandSID( req.cmd_sid );
-    mUartCommand.setResponseBuf( payload_buf->buf );
-    
-    // Send uart command request
-    sendUart( command_len, command_array );
-    
-    // Wait UART response
-    ret = mUartCommand.wait();
-    if( ret != 0 )
-    {
-        printf( "wifi_off failed\r\n" );
-        gMEMPOOL_PAYLOAD.free( payload_buf );
-        return -1;
-    }
-    
-    if( mUartCommand.getCommandStatus() != 0 )
-    {
-        printf("wifi_off status:%02x\r\n", mUartCommand.getCommandStatus());
-        ret = -1;
-    }
-    gMEMPOOL_PAYLOAD.free( payload_buf );
-
-    return ret;
-}
-
-int C_YDwifiInterface::getRssi( signed char *rssi_p )
-{
-    if( rssi_p == NULL )
-    {
-        printf("getRssi parameter error\r\n");
-        return -1;
-    }
-    
-    // Get buffer for response payload from MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = gMEMPOOL_PAYLOAD.alloc();
-    if( payload_buf == NULL )
-    {
-        printf("getRssi payload_buf NULL\r\n");
-        return -1;
-    }
-
-    tagWIFI_GET_STA_RSSI_REQ_T req;
-    unsigned char  payload_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char  command_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned short payload_len;
-    unsigned int   command_len;
-    int ret;
-    
-    // Make request
-    req.cmd_sid = UART_CMD_SID_WIFI_GET_STA_RSSI_REQ;
-    req.seq     = mUartRequestSeq++;
-    
-    // Make command payload
-    payload_len = C_YD_UartMsg::makePayload( sizeof(tagWIFI_GET_STA_RSSI_REQ_T), (unsigned char *)&req, payload_array );
-    // Make all command request
-    command_len = C_YD_UartMsg::makeRequest( UART_CMD_ID_WIFI, payload_array, payload_len, command_array );
-
-    // Set data for response
-    mUartCommand.setCommandID( UART_CMD_ID_WIFI );
-    mUartCommand.setCommandSID( req.cmd_sid );
-    mUartCommand.setResponseBuf( payload_buf->buf );
-    
-    // Send uart command request
-    sendUart( command_len, command_array );
-    
-    // Wait UART response
-    ret = mUartCommand.wait();
-    if( ret != 0 )
-    {
-        printf( "getRssi failed\r\n" );
-        gMEMPOOL_PAYLOAD.free( payload_buf );
-        return -1;
-    }
-    
-    *rssi_p = (signed char)payload_buf->buf[2];
-
-    gMEMPOOL_PAYLOAD.free( payload_buf );
-    return 0;
-}
-
-int C_YDwifiInterface::getWifiStatus( tagWIFI_STATUS_T *status_p)
-{
-    if( status_p == NULL )
-    {
-        printf("getWifiStatus parameter error\r\n");
-        return -1;
-    }
-    
-    // Get buffer for response payload from MemoryPool
-    tagMEMPOOL_BLOCK_T *payload_buf = gMEMPOOL_PAYLOAD.alloc();
-    if( payload_buf == NULL )
-    {
-        printf("getWifiStatus payload_buf NULL\r\n");
-        return -1;
-    }
-
-    tagWIFI_GET_STATUS_REQ_T req;
-    unsigned char  payload_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned char  command_array[UART_REQUEST_PAYLOAD_MAX];
-    unsigned short payload_len;
-    unsigned int   command_len;
-    int ret;
-    
-    // Make request
-    req.cmd_sid = UART_CMD_SID_WIFI_GET_STATUS_REQ;
-    req.seq     = mUartRequestSeq++;
-    req.interface = 0;
-    
-    // Make command payload
-    payload_len = C_YD_UartMsg::makePayload( sizeof(tagWIFI_GET_STATUS_REQ_T), (unsigned char *)&req, payload_array );
-    // Make all command request
-    command_len = C_YD_UartMsg::makeRequest( UART_CMD_ID_WIFI, payload_array, payload_len, command_array );
-
-    // Set data for response
-    mUartCommand.setCommandID( UART_CMD_ID_WIFI );
-    mUartCommand.setCommandSID( req.cmd_sid );
-    mUartCommand.setResponseBuf( payload_buf->buf );
-    
-    // Send uart command request
-    sendUart( command_len, command_array );
-    
-    // Wait UART response
-    ret = mUartCommand.wait();
-    if( ret != 0 )
-    {
-        printf( "getWifiStatus failed\r\n" );
-        gMEMPOOL_PAYLOAD.free( payload_buf );
-        return -1;
-    }
-    
-    // set status
-    status_p->status = (E_WIFI_STATUS)payload_buf->buf[2];
-    
-    // set Mac address
-    if( status_p->status != e_STATUS_OFF )
-    {
-        memcpy( status_p->mac_address, &payload_buf->buf[3], BSSID_MAC_LENTH );
-    } 
-
-    // set SSID
-    if( ( status_p->status == e_STA_JOINED ) == ( status_p->status == e_AP_STARTED ) )
-    {
-        memcpy( status_p->ssid, &payload_buf->buf[9], strlen( (char *)&payload_buf->buf[9]) );
-    } 
-
-    gMEMPOOL_PAYLOAD.free( payload_buf );
-    return 0;
-}